IWASAKI LIGHTING - EYE Lighting International of North America, Inc.

Recommendations

Info

I HID LAMPS HID LAMP INFORMATION Introduction to HID Lamps High Intensity Discharge Lamp Life Versus Operating Cycle Average Rated Life is the life value assigned to a particular lamp type. Statistically, Average Rated Life is a numeric value in hours of the median, (50% point), of a population of lamps that remain operating. For Example, if a lamp had an Average Rated Life of 10,000 hours and 100 new lamps were installed in the same location, approximately 50 lamps would still be operating after 10,000 hours. The starting process of HID lamps place the highest level of stress on the lamp electrodes. Shortly after the arc tube fi ll gasses breakdown, the tungsten electrodes undergo a condition called sputtering. The sputtering condition vaporizes a small amount of the electrode, which is deposited on the arc tube inner wall. Tungsten deposited from the electrode on the arc tube wall builds up as a black deposit resulting in reduced lamp lumens, higher arc tube wall temperatures and possible premature rupture of the arc tube. Electrodes of a HID lamp are designed to withstand operating cycles of 1 start every 10 hours to achieve Warning the life rating of the lamp. Operating cycles less than 10 hours will result in shorter lamp life. There are other factors that can impact HID lamp life, such as: • type of ballast used, • age and condition of the capacitor, • lamp luminaire temperatures, • operating position of the lamp. HID lamps should only be operated in the position specifi ed in the lamp literature or catalog. The following guidelines apply to the expected Average Rated Life when the lamp is operated with the recommended ballasts. • Published Average Rated Life is achieved using a 10-hour (on) operating cycle. • A fi ve-hour operating cycle may result in achieving only 75% of the published Average Rated Life. • A two and one-half hour operating cycle may result in achieving only 50% of the published Average Rated Life. In applications where Metal Halide lamps are on a 24 hour operating cycle, 7 days a week, they are to be turned off once per week, for at least 1 hour. This is to prevent the remote possibility of a lamp rupturing and the heated components separating from the lamp, causing personal injury and, or property damage. Metal Halide Lamps Operated on Dimming Ballasts All EYE Metal Halide lamps, except, Multi-Metal Ace family, can be dimmed up to 65% of the lamp nominal wattage on EYE Lighting approved dimming ballast systems. Lamps must be operated at least 5 minutes at full power prior to dimming. Dimming systems that reduce the input line voltage to the ballast are NOT RECOMMENDED. Lamps operated on dimming systems may exhibit extreme color shift and low lumen output. Contact your local EYE Lighting representative for a list of approved dimming systems. What is the EPA TCLP The EPA Toxic Leachate Characteristic Procedure is a method prescribed by the US EPA as a way of determining the toxicity of a waste product. Solid waste falls under US EPA method #1311, which establishes a standard lab method for characterizing the toxicity of a solid waste. Based on the results of the TCLP test the waste is either determined to be acceptable for disposal in a standard landfi ll (with local approval), or, it’s determined to require special toxic waste handling or recycling. EYE EN signifi es TCLP compliance. I-4 Call: 888-665-2677 • Fax: 800-811-7395 • e-mail: sales@eyelighting.com • web: www.eyelighting.com
LAMP FAMILY & APPLICATION GUIDE . . . . .1-2 PRODUCT HEADING GUIDE . . . . . . . . . . . .1-3 PRODUCT DESCRIPTION GUIDE . . . . . . . . .1-3 HIGH OUTPUT, LONG-LIFE EYE MULTI-METAL IGNITEK . . . . . . . . . . . 1-4 HIGH OUTPUT EYE MULTI-METAL SUPER X-LINE . . . . . . . 1-5 EYE PROTECTED METAL HALIDE . . . . . . . . 1-6 EYE SHATTERPROOF METAL HALIDE . . . . . 1-7 EYE MULTI-METAL X-LINE. . . . . . . . . . . . 1-8 PULSE START EYE MULTI-METAL - MEDIUM BASE . . . . . 1-9 EYE MULTI-METAL - MOGUL BASE . . . . . 1-10 STANDARD UNIVERSAL EYE MULTI-METAL . . . . . . . . . . . . . . . 1-11 LOW WATT MEDIUM BASE EYE MULTI-METAL . . . . . . . . . . . . . . . 1-12 UV-CUT METAL HALIDE . . . . . . . . . . . . . . 1-13 TUBULAR EYE MULTI-METAL . . . . . . . . . . . . . . . 1-14 METAL HALIDE RETROFIT FROM HPS EYE MULTI-METAL ACE . . . . . . . . . . . . 1-15 METAL HALIDE LAMPS HIGH COLOR RENDERING EYE COLOR ARC® - TUBULAR. . . . . . . . . . 1-16 EYE COLOR ARC® - SINGLE-ENDED . . . . . . 1-17 EYE COLOR ARC RENAISSANCE . . . . . . . 1-18 EYE COLOR ARC® PAR36 . . . . . . . . . . . . . 1-19 EYE COLOR ARC® PAR38 . . . . . . . . . . . . . 1-20 BEAM SPREAD INFORMATION . . . . . . . . . 1-21 SPECIALTY COLOR EYE COLOR ARC® . . . . . . . . . . . . . . . . . 1-22 HIGH PERFORMANCE CERAMIC METAL HALIDE EYE CERA ARC® SINGLE ENDED . . . . . . . . 1-23 EYE CERA ARC® MEDIUM BASE AND G12 BASE PLUS SPECIAL COLORS . . . . . . 1-24 EYE CERA ARC® MOGUL BASE . . . . . . . . . 1-25 HIGH COLOR RENDERING (DAYLIGHT) EYE CLEAN ARC . . . . . . . . . . . . . . . . . 1-26 METAL HALIDE RETROFIT FROM MERCURY EYE CLEAN ACE . . . . . . . . . . . . . . . . . 1-27 HIGH WATTAGE HIGH COLOR RENDERING EYE QUARTZ ARC . . . . . . . . . . . . . . . . 1-28 WARNING AND OPERATING INSTRUCTIONS . . . . . . . . . . . 1-29 Call: 888-665-2677 • Fax: 800-811-7395 • e-mail: sales@eyelighting.com • web: www.eyelighting.com 1 METAL HALIDE 1-1
Page 1 and 2: CeRTifiCATiOn fOR A BeTTeR enviROnm
Page 3 and 4: TABLE OF CONTENTS TECHNOLOGY GLOBAL
Page 5 and 6: BEFORE AFTER THE GREAT CANADIAN OIL
Page 7 and 8: GLOBAL APPLICATIONS YAMATO OAK CITY
Page 9 and 10: GLOBAL APPLICATIONS TONOGAICHI PARK
Page 11 and 12: EYE LIGHTING CERTIFICATIONS CONTINU
Page 13 and 14: EYE LIGHTING INTERNATIONAL Address:
Page 15 and 16: EASY TO NAVIGATE The easy to use me
Page 17 and 18: Line # Product Code Fixture Analyze
Page 19 and 20: FEATURED METAL HALIDE FAMILY Aquari
Page 21 and 22: FEATURED METAL HALIDE FAMILY There
Page 23 and 24: Premium Universal/High Output Posit
Page 25 and 26: cent of relative energy 100 90 80 7
Page 27 and 28: BENEFITS Excellent Color and E� c
Page 29 and 30: FEATURED HIGH PRESSURE SODIUM FAMIL
Page 31 and 32: FEATURED HALOGEN FAMILY EYE Dichro-
Page 33 and 34: FEATURED HALOGEN FAMILY EYE Dichro-
Page 35 and 36: APPLICATIONS • Mining Equipment
Page 37 and 38: High Pressure Sodium & Mercury Lamp
Page 39 and 40: Halogen Lamps - Specialty Lighting
Page 41 and 42: CRI=100 HID LAMP CHARACTERISTICS Th
Page 43 and 44: HID LAMP CHARACTERISTICS Understand
Page 45 and 46: EYE HID SPECTRAL DISTRIBUTION EYE I
Page 47 and 48: EYE HID SPECTRAL DISTRIBUTION EYE M
Page 49 and 50: EYE lamps use a nickel-plated brass
Page 51: HID LAMP INFORMATION TYPES OF HID L
Page 55 and 56: Bulb: shape and size followed by bu
Page 57 and 58: Line # Watts (W) Bulb Base Product
Page 73 and 74: 70W PAR36 H fc M70P36SSDW Beam Diam
Page 79 and 80: Line # METAL HALIDE LAMPS High Colo
Page 81 and 82: METAL HALIDE LAMPS Warning and Oper
Page 83 and 84: Product Code Metal Halide Cross ref
Page 85 and 86: Product Code METAL HALIDE CROSS REF
Page 87 and 88: HIGH PRESSURE SODIUM LAMPS Lamp Fam
Page 89 and 90: Line # HIGH PRESSURE SODIUM LAMPS H
Page 91 and 92: Line # Watts (W) HIGH PRESSURE SODI
Page 93 and 94: Line # HIGH PRESSURE SODIUM LAMPS H
Page 95 and 96: HIGH PRESSURE SODIUM LAMPS Warning
Page 97 and 98: LAMP FAMILY & APPLICATION GUIDE . .
Page 99 and 100: Bulb: shape and size followed by bu
Page 103 and 104:
Line # Watts (W) Bulb Base Product
Page 105 and 106:
Product Code Product Description Me
Page 107 and 108:
LAMP & BALLAST KITS & COMPONENTS LA
Page 109 and 110:
Line # Watts (W) Notes: 1. QUAD is
Page 111 and 112:
Line # Watts (W) Product Descriptio
Page 113 and 114:
Line # Watts (W) EYE Mercury Vapor
Page 115 and 116:
Line # Watts (W) Product Code Notes
Page 117 and 118:
Line # Watts (W) Capacitors Product
Page 119 and 120:
GENERAL LIGHTING HALOGEN LAMPS Exce
Page 121 and 122:
BASE TYPE ø1 (.04) 6.35 (.25) 7.5
Page 123 and 124:
Volts: Rated lamp voltage Watts: La
Page 125 and 126:
Line # Watts (W) Volts (V) GENERAL
Page 127 and 128:
GENERAL LIGHTING HALOGEN LAMPS MR11
Page 129 and 130:
Page 131 and 132:
42W 20W 50W 9' 10'' 9' 10'' 9' 10''
Page 133 and 134:
Page 135 and 136:
Line # Watts (W) GENERAL LIGHTING H
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Line # Watts (W) Volts (V) 2 Pin Ba
Page 153 and 154:
Page 155 and 156:
82.6 (3.25) 95.2 (3.75) 63.5 (2.5)
Page 157 and 158:
SPECIALTY/ENTERTAINMENT HALOGEN LAM
Page 159 and 160:
SPECIALTY/ENTERTAINMENT HALOGEN LAM
Page 161 and 162:
Line # SPECIALTY/ENTERTAINMENT HALO
Page 163 and 164:
ø13 max (.51) SPECIALTY/ENTERTAINM
Page 165 and 166:
3.9 nom (.15) 8.4 nom (.33) ø1.5±
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Line # Watts (W) Volts (V) Product
Page 175 and 176:
Line # Watts (W) Volts (V) Notes: 1
Page 177 and 178:
Line # Watts (W) Volts (V) Base MR8
Page 179 and 180:
Product Code EYE Product Descriptio
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
ANSI Reference HALOGEN ANSI REFEREN
Page 189 and 190:
JD # Product Comparison Guide HALOG
Page 191 and 192:
SPECIAL APPLICATION LAMPS MERCURY B
Page 193 and 194:
Line # Watts (W) Product Code Notes
Page 195 and 196:
Product Locator Product Page# Produ
Page 197 and 198:
industry Product descriPtion Locato
Page 199 and 200:
industry Product descriPtion Locato
Page 201 and 202:
eye Product descriPtion Locator Pro
Page 203 and 204:
Ace: The EYE trade name that identi
Page 205 and 206:
H Harmonics: Refers to components o
Page 207 and 208:
S Series Circuit: Ballast circuit i
Page 209 and 210:
NOTES Call: 888-665-2677 • Fax: 8
Page 211 and 212:
Environmentally Energized EYE Light
show all

IWASAKI LIGHTING - EYE Lighting International of North America, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?