PC_GSA7-10 (Lombardini) Open set Rev.00_05-2005_EN
PC_GSA7-10 (Lombardini) Open set Rev.00_05-2005_EN
PC_GSA7-10 (Lombardini) Open set Rev.00_05-2005_EN
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
G<strong>EN</strong>ERATING SET TECHNICAL GUIDE <strong>GSA7</strong>-<strong>10</strong> <strong>Open</strong> <strong>set</strong><br />
MODEL|<strong>GSA7</strong>-<strong>10</strong><br />
REF. GDS <strong>05</strong>.00<br />
LOMBARDINI Diesel engine.<br />
Air cooling system.<br />
Industrial muffler.<br />
Complete with engine and battery liquids.<br />
TECHNICAL FEATURES<br />
MANUAL CONTROL PANEL (MCP)<br />
MODEL GSA 7 GSA<strong>10</strong><br />
CODE SG060TLA SG<strong>10</strong>0TLA<br />
PRIME POWER PRP kVA (kW) 6,1 (4,9) <strong>10</strong>,1 (8,1)<br />
EMERG<strong>EN</strong>CY POWER LTP<br />
Frequency Hz 50 50<br />
Power factor Cos φ 0,8 0,8<br />
Fuel capacity Litres 7 <strong>10</strong><br />
Autonomy ( <strong>10</strong>0% load PRP) h 3,3 3,1<br />
Dimensions (LxWxH) mm 920x650x1.0<strong>10</strong> 1.440x660x1.015<br />
Weight kg 232 244<br />
DIESEL <strong>EN</strong>GINE <strong>Lombardini</strong> 4LD 820/L 9LD 625/2<br />
Cooling system Type Air Air<br />
Speed rpm 1.500 1.500<br />
Displacement c.c. 817 1.248<br />
Cyliders and disposition n° disp. 1 L 2 L<br />
Aspiration Tipo Natural Natural<br />
Engine power PRP kWm 6 <strong>10</strong><br />
Fuel consumption (<strong>10</strong>0% load) l/h 2,1 3,2<br />
Specific consumption PRP g/kWh ND ND<br />
Engine governor (standard) Type Mechanical Mechanical<br />
SYNCHRONOUS ALTERNATOR LINZ E1S 13S/4 - 7,5kVA E1S 13S/4 - 11kVA<br />
Insulation Class H H<br />
Mechanical degree of protection Type IP23 IP23<br />
Voltage regulation Type Compound<br />
MANUAL CONTROL PANEL (MCP) GSA 7 GSA<strong>10</strong><br />
Manual control panel, mounted on<br />
the gen<strong>set</strong> and complete of:<br />
instrumentation, protection and<br />
sockets.<br />
kVA (kW)<br />
Instrumentation<br />
(analogue)<br />
Commands and<br />
others<br />
Protections<br />
Output sockets<br />
• Voltmeter.<br />
• Frequency meter.<br />
• Ammeter.<br />
• Hours-counter.<br />
• Start and stop selector switch with key.<br />
• Emergency stop button.<br />
6,8 (5,4) 11,3 (9,0)<br />
Voltage Volt 400/230 400/230<br />
• Engine protection: low oil pressure, battery charger failure.<br />
• Circuit breaker protection: IV poles.<br />
• Differential protection.<br />
1 x 3P+N+T 400V/16A CEE socket.<br />
1 x 2P+T 230V/16A CEE socket.<br />
1 x Schuko 230V/16A socket.<br />
Compound<br />
TECHNICAL CHARACTERISTICS NOT IMPEGNATIVE RESERVATION OF MODIFICATIONS FOR INNOVATION OF THE PRODUCT<br />
<strong>Rev.00</strong> Pag. 1 of 2
G<strong>EN</strong>ERATING SET TECHNICAL GUIDE <strong>GSA7</strong>-<strong>10</strong> <strong>Open</strong> <strong>set</strong><br />
AUTOMATIC CONTROL PANEL (ACP)<br />
GSA 7<br />
GSA<strong>10</strong><br />
AUTOMATIC CONTROL PANEL (ACP)<br />
Automatic control panel mounted<br />
on the gen<strong>set</strong>, complete with<br />
digital control unit AC02 for<br />
monitoring, control and protection<br />
of the generating <strong>set</strong>.<br />
• Generating <strong>set</strong> voltage.<br />
Digital • Generating <strong>set</strong> frequency.<br />
instrumentation • Generator <strong>set</strong> current.<br />
through AC02 control • Battery voltage.<br />
unit. • Hours-counter.<br />
• Mains voltage.<br />
Commands and<br />
others<br />
Protections with<br />
alarm<br />
Protections with<br />
shutdown<br />
• Selector switch with six positions: Automatic test - Automatic starting - Engine locked - Mains contactor<br />
forced - Manual starting - Gen<strong>set</strong> contactor forced.<br />
• Push-buttons: start/stop, up/down selection, re<strong>set</strong>.<br />
• Emergency stop button.<br />
• Remote starting availability.<br />
• Automatic battery charger.<br />
• Engine protection: low oil pressure.<br />
• Gen<strong>set</strong> protection: under/over voltage, overload, battery charger failure, battery voltage out of limits,<br />
under/over frequency, start failure.<br />
• Engine protection: low oil pressure.<br />
• Gen<strong>set</strong> protection: under/over voltage, overload, battery charger failure, battery voltage out of limits,<br />
under/over frequency, start failure.<br />
• Circuit breaker protection: IV poles.<br />
• Differential protection.<br />
TECHNICAL CHARACTERISTICS NOT IMPEGNATIVE RESERVATION OF MODIFICATIONS FOR INNOVATION OF THE PRODUCT<br />
AUTOMATIC CONTROL PANEL (AMF)<br />
Automatic control panel for<br />
automatic starting by Mains<br />
failure. Delivered loose from the<br />
gen<strong>set</strong>, and complete with digital<br />
control unit AC02 for monitoring,<br />
control and protection of the<br />
generating <strong>set</strong>.<br />
Output<br />
AUTOMATIC CONTROL PANEL (AMF)<br />
• Generating <strong>set</strong> voltage.<br />
Digital • Generating <strong>set</strong> frequency.<br />
instrumentation • Generator <strong>set</strong> current.<br />
through AC02 control • Battery voltage.<br />
unit. • Hours-counter.<br />
• Mains voltage.<br />
Commands and<br />
others<br />
Change over<br />
contactors<br />
Mains/Gen<strong>set</strong><br />
Protections with<br />
alarm<br />
Protections with<br />
shutdown<br />
Output<br />
ACCESSORIES<br />
LOAD TRANSFER SWITCH PANEL.<br />
• Plinth row for connection from ACP to LTS panel.<br />
• Power cables connection directly from circuit breaker.<br />
<strong>GSA7</strong><br />
• Selector switch with six positions: Automatic test - Automatic starting - Engine locked - Mains contactor<br />
forced - Manual starting - Gen<strong>set</strong> contactor forced.<br />
• Push-buttons: start/stop, up/down selection, re<strong>set</strong>.<br />
• Emergency stop button.<br />
• Remote starting availability.<br />
• Automatic battery charger.<br />
IV poles - 20A.<br />
IV poles - 20A.<br />
• Engine protection: low oil pressure.<br />
• Gen<strong>set</strong> protection: under/over voltage, overload, battery charger failure, battery voltage out of limits,<br />
under/over frequency, start failure.<br />
• Engine protection: low oil pressure.<br />
• Gen<strong>set</strong> protection: under/over voltage, overload, battery charger failure, battery voltage out of limits,<br />
under/over frequency, start failure.<br />
<strong>GSA7</strong><br />
GSA<strong>10</strong><br />
• Plinth row for connection from pre-wired panel (mounted on the gen<strong>set</strong>) to AMF panel.<br />
• Power cables connected to terminals board (internal).<br />
GSA<strong>10</strong><br />
Change over<br />
contactors<br />
IV poles - 20A. IV poles - 20A.<br />
ACCESSORIES<br />
Load transfer switch panel built in<br />
a metal cabinet and supplied loose<br />
from the gen<strong>set</strong>.<br />
Connections<br />
Protections<br />
• Plinth row for connection from ACP to LTS panel.<br />
• Terminals board for power cables connection (Gen<strong>set</strong>-Mains-Load).<br />
• Contactors mechanically and electrically interlocked.<br />
• Emergency stop button.<br />
Automatic control panel + LTS panel measures the Mains voltage and starts automatically the gen<strong>set</strong> within few seconds in case of<br />
Mains failure. It transfers immediately the load again to the gen<strong>set</strong> when the Mains voltage returns within the rated values.<br />
<strong>Rev.00</strong> Pag. 2 of 2
Change language