Exhaust System - Donaldson Company, Inc.

Exhaust for vehicles/equipment
application design worksheet
For proper development/design engineering solution,
we ask you to provide details about your engine,
project due dates, exhaust system and performance
(mechanical and filtration), system mounting, service,
final packaging and product markings.
Customer Name:
When completed, please forward to Donaldson.
Email: engine@donaldson.com Fax: 952-887-3059
Interested in Exhaust Aftertreatment
Call 952-887-3131 and ask for the Emissions
Business Unit Product Management
Revision:
Project Name:
Contact Name:
Title
Phone: Fax: Email:
Current Donaldson Model Used: (if applicable)
Your Part Number:
Project Details
Type of Machine: ______________________________
Units Per Year: ____________
Key Project Dates:
Design Proposal: _____________________
Prototype Delivery: _____________________
Design Freeze: _____________________
PPAP:
_____________________
Start of Production: _____________________
Engine Information
Manufacturer_________________________________
Model ______________________________________
Displacement ________________________________
No of Cylinders_______________________________
Type: ¨ Turbo ¨ Naturally Aspirated
Backpressure Limit: _____________inches Hg or KPa
Full Load Rating ___________hp/kw at ________rpm
Exhaust
Flow: ____________ at ¨ Kg / hr. ¨ Lbs. / min.
¨ CFM ¨ Cubic M / min.
¨ Other _________________
Exhaust Stack Temp. ____________ º C
Device Type & Shape: ¨ Single ¨ Dual
¨ Round ¨ Oval
Size Limitations: ¨ mm ¨ inches
Body Dia. ________ Overall Length_ ________
Inlet Dia. ________ Outlet Dia.____________
System Lengths: ¨ mm ¨ inches
Before device. ___________________________
After device (including stack)________________
Exhaust Stack: ¨ Clamp-on ¨ Hood Mounted
Device Style: ¨ Style 1 ¨ Style 2 ¨ Style 3
Device Style: ¨ Style 4 ¨ Style 5 ¨ Style 6
Style 1
Style 2
Style 3
Style 4
Style 5
Muffler / Device Features
¨ Ejector (internal)
¨ Thermal Wrap
¨ Ejector (attachment)
¨ Shell Noise Wrap
¨ Spark Arrestor (internal) ¨ Spark Arrestor (attachment)
Style 6
More on next page.

Sound Level / Acoustic Requirements
If available, provide current exhaust system spectrum and measurements. Fill in all that are applicable.
Noise Goals PWL SPL @ Meters KW RPM Exhuast Flow
1. Exhaust
Exhaust Stack
Temperature ºC
2. Exhaust
3.. Total Noise
Computer Engine Model Available ¨ Yes ¨ No
Lab Exhaust Only Spectrum Available ¨ Yes ¨ No
Specific Tonal Goals(s):
Frequency: (Hz) ___________________
Amplitude Improvement (dBA) ___________________ (provide graph)
Additional Information
Accessories
Mounting Bands
Hanging Brackets
Joint Clamps
Flex Tubing
Stacks
Elbows/Connectors
¨ Yes ¨ No
¨ Yes ¨ No
¨ Yes ¨ No
¨ Yes ¨ No
¨ Yes ¨ No
¨ Yes ¨ No
Installation & Service
Do you require installation, service or maintenance
recommendations from Donaldson ¨ Yes ¨ No
Additional Comments on Requirements
Packaging
Check all that apply
Protective caps: ¨ on inlet ¨ on outlet
¨ Other _________________________________
_________________________________
Final Assembly:
¨ Bulk ¨ Individual Boxes ¨ Returnable
¨ Other _________________________________
_________________________________
Product Markings
Describe product marking or finishing
requirements
For Donaldson USE ONLY
Date Received: _____________________________ Request From: ¨ Catalog ¨ Web Site
¨ Other _______________________
Assigned to:
Business Unit: _____________________________
Product Manager: __________________________
Account Manager: _________________________
Engineer: _________________________________
Donaldson Company, Inc.
PO Box 1299
Minneapolis, MN 55440-1200
Engine Exhaust
Applications Engineering
Doc. No. F115349 Rev.0 October 2010
© 2010 Donaldson Company, Inc. All rights reserved. Printed in the U.S.A.
Donaldson Company, Inc. reserves the right to change or discontinue any model
or specification at any time and without notice.
Donaldson Company, Inc., PO Box 1299, Minneapolis, MN 55440-1299