HP 5890 Series I and Series II Reference Manual (05890 ... - Ipes.us

Keyboard and Displays
Protecting setpoints
Figure 2-5
38
Additional information regarding INET control is available in Chapter 5,
Signal Output. Servicing may be required for one or more devices on the
INET loop if communication cannot be established.
Protecting setpoints
The HP 5890 provides a keyboard lock feature to minimize possibility of
stored setpoints being altered unintentionally. When the HP 5890
keyboard is locked, setpoint values (numeric values, A, B, OFF, and
ON) may only be displayed; they cannot be altered. START and STOP
remain functional, so runs may be started or stopped.
To lock instrument setpoints, first enter the key sequence:
CLEAR .
- ENTER
Then press ON to lock the keyboard, or OFF to unlock the keyboard.
Figure 2•5shows displays occurring during this process.
Keyboard Lock Displays
ACTUAL SETPOINT
CALIB AND TEST [0-0]
KEYBOARD LOCK ON
KEYBOARD LOCK OFF
ACTUAL SETPOINT
ACTUAL SETPOINT