Ives - Residential - StudioSupplier

• The COR series does not cover the entire length of the stop, so a f
tain architecturally clean lines.
• Cor series coordinator channels and fillers are made of aluminum an
US28 finish.
ABS-American
• Meets
Building
ANSI/BHMA A156.3,
Supply,
type 21A
INC.
Dimensions:
Ives - Commercial
MB1 & MB2 MOUNTING BRACKETS
Product Jamb Depth Stop Width
MB1 4-3/4” Min. Over 2-1/2”
MB2 4-3/4” Min. Up to 2-1/2”
1-5/8" Wide x 5/8" Deep x Ordered Length
MOUNTING BRACKETS
Product
ABS - AMERICAN
J
MB1 4
MB2 4
• Allows stop mounted hardware to be properly
installed without damaging the coordinator.
Stocked Product
MB1 & MB2
• Allows USP stop mounted hardware LOCK to be properly GUARDS installed without damag
PART NO. DESCRIPTION
LG1
9IVECOR72 COR52 COORDINATOR WITH 20" FILLER • Units BAR are non-handed
LG1 LOCK GUARDS
door and frame.
9IVEMB1
MOUNTING BRACKET FOR OVER 2-1/2" STOP
• Units are non-handed and incorporate security frame pin to prevent separation of the
• Unit covers the latch b
9IVEMB2
MOUNTING BRACKET FOR UNDER 2-1/2" STOP
door and frame.
from burglars, vandals
• Unit covers the latch bolt area of the door and lock, thereby providing added protection
• Ideal for use with mor
ABS - AMERICAN BUILDING
from burglars, vandals or normal abuse.
• Easy SUPPLY,
installation.
• Ideal for use with mortise or cylindrical locks.
Stocked Product
• Through bolted with c
• Easy installation.
US32D, US26
• Finishes: Stainless ste
• Through bolted with carriage bolts and nuts.
Steel - US2
IVES
• Finishes: Stainless steel - US32D, Steel - US2G
DOOR SILENCERS
LOCK GUARDS
LG1
• Units are non-handed and incorporate DOOR security SILENCERS
frame pin to prevent separa
door and frame.
SR64
• Unit covers the latch bolt area of the door and lock, thereby providing adde
from burglars, vandals or normal abuse.
• For use on metal frames featuring pneumatic design that, once • Ideal installed, for forms use with an air mortise pocket to absorb cylindrical locks.
shock and reduce noise of door closing.
• Easy installation.
• Tamper-proof once installed on the frame.
• Through bolted with carriage bolts and nuts.
• Proper installation also eliminates door rattle and provides constant • Finishes: tension Stainless for door latches steel or - locks. US32D
• Packed in bags of 100.
Steel - US2G
• Each bag has an installation tool included.
SR64
• Meets ANSI/BHMA 156.16, L03011
• For use on metal frames featuring pne
• Finish: gray
design that, once installed, forms an a
to absorb shock and reduce noise of d
closing.
• Tamper-proof once installed on the fra
SR65
DOOR SILENCERS
• Proper installation also eliminates door
provides constant tension for door latch
• For use on wood frames, also features pneumatic design to cushion shock and absorb noise.
locks.
• To prevent removal, a small brad should be driven into stop strip and through stem of silencer, as shown
• Packed in bags of 100.
in the detail.
• Each bag has an installation tool includ
• Packed in bags of 100.
• Meets ANSI/BHMA 156.16, L03011
• Each bag has an installation tool included.
• Finish: gray
• Meets ANSI/BHMA 156.16, L03021
• Finish: gray
SR64
PART SR65 NO. DESCRIPTION
22 American Building Supply, Inc. 03/11• For use on metal frames featuring pneumatic • For use on wood frames, also featu
9IVELG132D LOCK GUARD 3" X 11-1/2
design that, once installed, forms an air pocket design to cushion shock and absorb