Samba Sensors Background - Harvard Apparatus UK
Samba Sensors Background - Harvard Apparatus UK
Samba Sensors Background - Harvard Apparatus UK
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Fast and Simple Start-Up Procedure<br />
1. Insert the <strong>Samba</strong> transducer<br />
The transducer is factory calibrated - No further calibration is needed!<br />
2. Turn on your <strong>Samba</strong> 200 Control Unit<br />
Allow internal circuitry temperature to stabilize (1-2 minutes)<br />
3. Set the “zero baseline” against ambient air pressure<br />
The transducer is factory calibrated - No further calibration is needed!<br />
Simply follow instructions on the screen (‘ZERO’ or ‘PREVIOUS’)<br />
4. If needed set measurement rate, Absolute/Relative mode,<br />
pressure unit etc. or load pre-defined Profile<br />
5. Connect to PC or Data Acquisition System (DAS)<br />
When connected calibrate DAS by pressing ‘ANALOG CALIB.’<br />
6. Remove protective cover, apply sensor in object and start<br />
measuring!<br />
14