Custom drum parts and accessories - Gibraltar Hardware
Custom drum parts and accessories - Gibraltar Hardware
Custom drum parts and accessories - Gibraltar Hardware
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CUSTOM DRUM PARTS<br />
AND ACCESSORIES
2<br />
“JAW” Hoop Mountable<br />
Multi-Purpose Holders<br />
Hoop Clamping Jaws<br />
SC-JPM SC-JCM<br />
SC-JMM<br />
Rod Clamping<br />
Jaw<br />
Note: Clamps on conga <strong>and</strong><br />
timbale tension rod.<br />
SC-JPMTR<br />
SC-JMM<br />
SC-JCMTR<br />
NEW<br />
Contents: Page No.<br />
“Jaw” Multi-Purpose Holders . . . . . . . . . . . . . . . . . . . . . . . . .2<br />
Drum Throne Separates . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3<br />
<strong>Gibraltar</strong> Throne Seats (Roc-N-Soc) . . . . . . . . . . . . . . . . . . . .3<br />
Special Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3<br />
Snare Drum & Tom Tom Parts . . . . . . . . . . . . . . . . . . . . . . . . .4<br />
Snare Drum Snares & Parts . . . . . . . . . . . . . . . . . . . . . . . . . .5<br />
Bass Drum Parts & Accessories . . . . . . . . . . . . . . . . . . . . . . .6<br />
Bass Drum Pedal Parts & Accessories . . . . . . . . . . . . . . . . .7<br />
High-Use Bass Pedal Parts . . . . . . . . . . . . . . . . . . . . . . . . . . .7<br />
Tom Tom Mounting Systems . . . . . . . . . . . . . . . . . . . . . . . .8-9<br />
SC-JDRM<br />
NEW<br />
SC-JDRMM<br />
CONTENTS<br />
Throne Separates<br />
Bases<br />
GIBRALTAR THRONE SEATS AND<br />
THRONE BASES Available separately.<br />
All seats fit into <strong>Gibraltar</strong> throne bases or any<br />
7/8” dia. shaft. All seats <strong>and</strong> bases<br />
are covered under <strong>Gibraltar</strong>’s 3-year warranty.<br />
B9508<br />
B9508EX<br />
<strong>Gibraltar</strong> Tom Suspension System . . . . . . . . . . . . . . . . . . . .10<br />
Cymbal Arms & Mounting Systems . . . . . . . . . . . . . . . . .10-11<br />
Multi-Clamps & Spanner Parts . . . . . . . . . . . . . . . . . . . . . . .12<br />
Cymbal St<strong>and</strong> Parts & Rubber Feet . . . . . . . . . . . . . . . . . . .13<br />
Hi-Hat Parts & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . .13<br />
H<strong>and</strong> Percussion Mounting Systems . . . . . . . . . . . . . . . .14-17<br />
H<strong>and</strong> Drum Parts & Accessories . . . . . . . . . . . . . . . . . . . . .17<br />
<strong>Gibraltar</strong> Power Rack Parts & Accessories . . . . . . . . . . . . .18<br />
Rack Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19<br />
<strong>Gibraltar</strong> Road Series Parts & Accessories . . . . . . . . . . . . .19<br />
Notes: Specifications subject to change without prior notice. DW, GMS, Ludwig, L.P.,<br />
Mapex, Noble & Cooley, Pearl, Premier, Remo, R.I.M.S., Sonor, Tama, <strong>and</strong> Yamaha are<br />
registered trademarks of each respective company.
NEW<br />
Throne Seats<br />
CONVENTIONAL SIZED SEATS<br />
S9508R<br />
“Super Lock”<br />
seat fastening system<br />
S9508C<br />
OVERSIZED SEATS<br />
“JAW” Multi-Purpose Holders<br />
<strong>Gibraltar</strong>’s “Jaw” percussion clamps are<br />
designed to provide an easy uncluttered<br />
way of mounting various percussion<br />
instruments or microphones to <strong>drum</strong>s,<br />
congas, bongos <strong>and</strong> other instruments<br />
via their hoop or tension rod.<br />
JAW HOOP MOUNTS<br />
SC-JMM - Mic Holder. 1 pk. 40.50<br />
SC-JPM - Percussion Holder.1 pk. 40.50<br />
SC-JCM - Cymbal Holder. 1 pk. 40.50<br />
SC-JDRM -Double Ratchet Mount. Allows<br />
more adjustability. Can be used with<br />
9.5mm L-Rod. 1pk. 33.50<br />
SC-JDRMM - -Double Ratchet Mic<br />
Mount. Same as SC-JDRM, but includes<br />
Mic Mounting Rod. 1pk. 40.50<br />
JAW TENSION ROD MOUNTS<br />
SC-JPMTR - Percussion Mount for<br />
Tension Rod mounting. 1 pk. 40.50<br />
SC-JCMTR - Cymbal mount for tension<br />
rod mounting. 1 pk. 40.50<br />
S9508M<br />
S9508RB<br />
S9508MB<br />
THRONE BASE ASSEMBLIES<br />
B9508EX - Double-Braced Extended<br />
Height Throne Base. 117.95<br />
B9508 - Double-Braced Throne<br />
Base. 114.95<br />
THRONE SEATS<br />
<strong>Gibraltar</strong> throne seats are equipped<br />
with the new super lock throne seat<br />
fastening system. This provides rock<br />
solid support with more durability.<br />
All <strong>Gibraltar</strong> seats utilize a molded<br />
foam material. This firmer material provides<br />
better lower back support <strong>and</strong><br />
comfort.<br />
S9508RB - Round Vinyl Seat with<br />
Backrest. 110.95<br />
S9508R - Vinyl Round Seat. 59.95<br />
S9508MB - Oversized Cordura/Vinyl<br />
Moto Style Seat. 138.95<br />
S9508C - Round Cordura Seat with<br />
Thigh Cut Outs. 80.95<br />
RSGRC<br />
RSGMC<br />
OVERSIZED SEATS<br />
NEW<br />
<strong>Gibraltar</strong> Throne Seats<br />
By Roc-N-Soc<br />
9508OSS<br />
S9508M - Moto Style Cordura/Vinyl<br />
Seat. 91.95<br />
9508OSS - Oversized Drum Seat<br />
16” Dia..Stainless Steel throne<br />
bracket. 119.95<br />
NEW<br />
GIBRALTAR THRONE SEATS<br />
BY ROC-N-SOC<br />
<strong>Gibraltar</strong> offers three throne seats<br />
designed <strong>and</strong> manufactured for<br />
<strong>Gibraltar</strong> <strong>Hardware</strong> by Roc-N-Soc<br />
USA. All seats fit onto a 7/8” dia.<br />
shaft. Each seat utilizes Roc-N-Soc’s<br />
oversized design <strong>and</strong> premier foam<br />
<strong>and</strong> covering material which will<br />
provide years of solid support.<br />
RSGRC - Oversized Round Seat.<br />
144.95<br />
RSGBR - Backrest Attachment -<br />
For <strong>Gibraltar</strong>/Roc-N-Soc seats. 102.95<br />
Special<br />
Holders<br />
SC-SH<br />
RSGBR<br />
RSGRTC<br />
SC-SDH<br />
RSGMC - Oversized Motorcycle<br />
Seat. 149.95<br />
RSGRTC - Oversized Round Seat<br />
with thigh cutouts 144.95<br />
SPECIAL HOLDERS<br />
SC-SDH - Soft Drink Holder - Soft<br />
nylon holder clamps to any st<strong>and</strong>.<br />
Now fits 1 liter bottles <strong>and</strong> most drink<br />
containers. 1 pk. 25.95<br />
SC-SH - Stick Holder - 3-1/2” dia.<br />
holder holds up to six pairs of sticks.<br />
Detachable soft bag clamps to various<br />
<strong>drum</strong> st<strong>and</strong>s. 1 pk. 25.95<br />
3
4<br />
Snare Drum & Tom Tom Parts<br />
SC-1410BSD<br />
SC-1410BS<br />
SC-4244<br />
SC-4248<br />
STEEL POWER HOOPS<br />
2.3mm heavy-duty chrome <strong>drum</strong> hoops.<br />
Provide consistent shape/ tension <strong>and</strong><br />
clearer sound.<br />
BATTER SIDE HOOPS<br />
SC-0804TT - 8”/4 Lug Tom.1 pk. 16.50<br />
SC-1006TT - 10”/6 Lug Tom.1 pk. 17.95<br />
SC-1206TT - 12”/6 Lug Tom.1 pk. 19.50<br />
SC-1306TT - 13”/6 Lug Tom.1 pk. 21.95<br />
SC-1308BS - 13”/8 Lug Batter Side.<br />
1 pk. 22.50<br />
SC-1408BS - 14”/8 Lug Batter Side.<br />
1 pk. 21.95<br />
SC-1410BS - 14”/10 Lug Batter Side.<br />
1 pk. 20.95<br />
SC-1508TT - 15”/8 Lug Tom.1 pk. 23.95<br />
SC-1608TT - 16”/8 Lug Tom.1 pk. 20.95<br />
SC-1808TT - 18”/8 Lug Tom.1 pk.22.95<br />
SC-1410SS<br />
SC-RLW<br />
SNARE SIDE HOOPS<br />
SC-1006SS - 10”/6 Lug. 1 pk. 17.95<br />
SC-1206SS - 12”/6 Lug. 1 pk. 19.50<br />
SC-1308SS - 13”/8 Lug. 1 pk. 23.50<br />
SC-1408SS - 14”/8 Lug. 1 pk. 23.95<br />
SC-1410SS - 14”/10 Lug. 1 pk. 23.95<br />
DIE CAST HOOPS<br />
SC-1410SSD<br />
NEW<br />
NEW<br />
<strong>Custom</strong> designed top <strong>and</strong> bottom die<br />
cast hoops feature reinforced tension<br />
points, large snare gates, <strong>and</strong> highly<br />
polished chrome finish. Slightly oversized,<br />
our hoops allow snare <strong>drum</strong>s<br />
to project without choking or restricting<br />
the head in any way.<br />
SC-1308BSD - 13”/8 Lug Batter Side.<br />
1 pk. 79.95<br />
SC-1308SSD - 13”/8 Lug Snare Side.<br />
1 pk. 79.95<br />
SC-1410BSD - 14”/10 Lug Batter Side.<br />
1 pk. 79.95<br />
SC-1410SSD - 14”/10 Lug Snare Side.<br />
1 pk. 79.95<br />
SC-4245<br />
SC-4E<br />
TENSION RODS AND SNARES GLOSSARY<br />
Key Rod - Tension rod with <strong>drum</strong> key style head. Generally used<br />
on snare <strong>drum</strong>s, tom toms, <strong>and</strong> at the bottom of a bass <strong>drum</strong>.<br />
T-Rod - Tension rod with T-h<strong>and</strong>le. Used on bass <strong>drum</strong>s.<br />
DIAMETERS<br />
SC-4B SC-4C SC-4J<br />
SC-LN<br />
SC-4235<br />
7/32" - Fits toms <strong>and</strong> snares for Pearl, CB, Mapex, Tama, Ludwig,<br />
GMS, Legend, Noble & Cooley, Premier <strong>and</strong> most other manufacturers<br />
with the exception of Sonor.<br />
Note: 7/32" rods will fit D.W. <strong>drum</strong>s prior to 1996 production.<br />
6mm - Fits bass <strong>drum</strong>s for Pearl, CB, Mapex, <strong>and</strong> other generic<br />
Taiwan-made <strong>drum</strong>s. Other manufacturers generally use 7/32"<br />
dia. bass <strong>drum</strong> key rods (see chart on page 7).<br />
LENGTHS<br />
SC-4J - 1-3/8" (35mm) - Fits many piccolo snare <strong>drum</strong>s <strong>and</strong> small<br />
tom toms.<br />
SC-4C - 1-5/8" (41mm) - Fits many snare <strong>drum</strong>s, small <strong>and</strong> medium<br />
toms, <strong>and</strong> some floor toms.<br />
SC-4B - 2" (51mm) - Fits toms <strong>and</strong> floor toms with a lot of space<br />
between hoop <strong>and</strong> tension casing.<br />
SC-4E - 2-3/8" (58mm) - Fits some floor toms <strong>and</strong> bass <strong>drum</strong>s.<br />
DRUM KEYS & TONE CONTROLS<br />
SC-4244 - St<strong>and</strong>ard Drum Key - 1/4”<br />
socket fits all st<strong>and</strong>ard <strong>drum</strong> tension<br />
rods. 1 pk. 3.75<br />
SC-4245 - High Torque Drum Key -<br />
Fits all st<strong>and</strong>ard tension rods. Larger<br />
shaft <strong>and</strong> h<strong>and</strong>le section for more<br />
tension. 1 pk. 4.50<br />
SC-4248 - Speed Key - Crank-shaped<br />
key to speed head changes. 1/4”<br />
socket. 1 pk. 6.50<br />
SC-RLW - Ratchet Lug Wrench<br />
1 pk. 17.50<br />
SC-4235 - External Tone Control -<br />
Hoop-mount tone control device<br />
attaches to virtually any tom tom<br />
or snare <strong>drum</strong>. 1 pk. 15.95<br />
SC-4400 - Internal Tone Control -<br />
Mounts inside <strong>drum</strong> with adjustment on<br />
exterior. Exerts pressure by felt pad<br />
against head. 1 pk. 15.95<br />
SC-LG<br />
SC-SSW<br />
SC-4400<br />
SC-11C<br />
KEY RODS/TENSION RODS<br />
(7/32” DIA.)<br />
SC-4E - 2-3/8” (58mm) Tension Rods.<br />
6 pk. 4.50<br />
SC-4B - 2” (51mm) Tension Rods.<br />
6 pk. 4.50<br />
SC-4C - 1-5/8” (41mm) Tension Rods.<br />
6 pk. 4.50<br />
SC-4J - 1-3/8” (35mm) Tension Rods. 6<br />
pk. 4.50<br />
SC-LG - Lug Nuts - Swivel nuts fit<br />
most bass <strong>drum</strong> tension lugs.<br />
(6mm dia.) 12 pk. 4.50<br />
SC-LN - Small Lug Nuts - Swivel nuts<br />
fit most tom tom tension lugs. (7/32”<br />
dia.) 12 pk. 4.50<br />
SC-SSW - ABS Tension Washers -<br />
10 pk. 9.95<br />
SC-11C - Tension Rod Washers -<br />
24 pk. 5.95
Snare Drum Snares & Parts<br />
SC-016A<br />
SNARE DRUM SNARES<br />
SC-216A<br />
Quality chrome-plated coiled steel<br />
wire. Trenched butt plates provide<br />
even tension <strong>and</strong> contact with head<br />
for improved response.<br />
SC-016A - 10”/16 str<strong>and</strong>. 1 pk. 9.95<br />
SC-216A - 12”/16 str<strong>and</strong>. 1 pk. 9.95<br />
SC-1316 - 13”/16 str<strong>and</strong>. 1 pk. 9.95<br />
SC-360A - 13”/12 str<strong>and</strong>. 1 pk. 9.95<br />
SC-4459 - 14”/16 str<strong>and</strong>. 1 pk. 10.95<br />
SC-4467 - 14”/20 str<strong>and</strong>. 1 pk. 10.95<br />
SC-1316 SC-360A<br />
WIRE SNARES (SNARE DRUM SNARES)<br />
DESCRIPTIONS<br />
• INCHES - This designates the diameter <strong>drum</strong> the snare is designed to fit.<br />
It may not be the actual length of the snare wire assembly.<br />
• STRANDS - This is the amount of snare wires on each snare.<br />
• Normal Fit - Most snares do not fit past the edge of the snare side <strong>drum</strong><br />
head. (This includes all <strong>Gibraltar</strong> snares except SC-4467L <strong>and</strong> SC-363E.)<br />
• Extended Length - Some snare <strong>drum</strong>s utilize snares which fit over the<br />
edge of the snare side hoop. The SC-4467L will fit most <strong>drum</strong>s with this<br />
feature.<br />
• Special Snares -The SC-363E fits Ludwig Super Sensitive Snare <strong>drum</strong>s<br />
with non-individually adjustable snare wire systems <strong>and</strong> a Yamaha model<br />
which utilizes split snares.<br />
Note: <strong>Gibraltar</strong> snares are designed to fit many manufacturers' snare <strong>drum</strong>s. They are<br />
made to fit snare <strong>drum</strong>s ranging from 10" to 14" in diameter <strong>and</strong> are primarily designed<br />
for Jazz, Rock, <strong>and</strong> concert performance applications. <strong>Gibraltar</strong> snares are not designed<br />
for super high-tension applications, such as field/marching corps or similar performance<br />
situations.<br />
SC-4467L - 16”/20 str<strong>and</strong> with<br />
extended length. Fits 14” snare.<br />
1 pk. 10.95<br />
SC-363E - 14”/20 str<strong>and</strong> (split 10/10).<br />
1 pk. 24.95<br />
SC-4471 - 14”/42 str<strong>and</strong>.<br />
1 pk. 19.95<br />
SC-4459 SC-4467<br />
SC-4385<br />
SC-4467L<br />
SNARE DRUM PARTS<br />
SC-SSC<br />
SC-PTO<br />
SC-4385 - Snare Drum Throw-Off -<br />
Snare strainer with full throw-off, fine<br />
tuning adjustment with butt end <strong>and</strong><br />
screws. 1 pk. 25.95<br />
SC-PTO - Piccolo Throw-Off -<br />
Throw-off for short <strong>drum</strong>s.<br />
1 pk. 20.95<br />
SC-SC - Snare Cord - Tight weave<br />
nylon cord with double laminated<br />
ends. 6 pk. 4.95<br />
SC-363E<br />
SC-SC<br />
SC-4471<br />
SC-STO<br />
SC-SBE<br />
SC-NSC<br />
SC-STO - Deluxe Snare Throw-Off -<br />
Quick-release throw-off mechanism<br />
allows easy adjustment of snare<br />
tension. 1 pk. 30.50<br />
SC-SSC - Metal Snare Cord<br />
4 pk. 6.50<br />
SC-SBE - Deluxe Snare Butt End -<br />
Butt end assembly with deep channel<br />
<strong>and</strong> high tension <strong>drum</strong> key bolts<br />
eliminates snare slippage.<br />
1 pk. 7.95<br />
SC-NSC - Nylon snare strip.<br />
4 pk. 6.95<br />
5
6<br />
Bass Drum Parts & Accessories<br />
SC-BPL<br />
SC-BPF<br />
SC-BF<br />
WOOD BASS DRUM HOOPS<br />
8-ply, all-maple construction finished<br />
in natural or black lacquer.<br />
Natural Lacquer<br />
SC-18M - 18” Hoop. 1 pk. 82.95<br />
SC-20M - 20” Hoop. 1 pk. 92.95<br />
SC-22M - 22” Hoop. 1 pk. 102.95<br />
SC-24M - 24” Hoop. 1 pk. 112.95<br />
Black Lacquer<br />
SC-18BK - 18” Hoop. 1 pk. 82.95<br />
SC-20BK - 20” Hoop. 1 pk. 92.95<br />
SC-22BK - 22” Hoop. 1 pk. 102.95<br />
SC-24BK - 24” Hoop. 1 pk. 112.95<br />
SC-BPL - Bass Drum Vinyl Beater<br />
Pad - Leather-like vinyl pad mounts<br />
to <strong>drum</strong> head. 4 pk. 10.50<br />
SC-BPS - Bass Drum Suede Beater<br />
Pad - Suede pad to protect bass <strong>drum</strong><br />
head. 4 pk. 9.95<br />
SC-DPP<br />
SC-22BK<br />
SC-BPS<br />
SC-22M<br />
SC-BPF - Felt Impact Pad - Adhesive<br />
felt pad mounts on <strong>drum</strong> head.<br />
4 pk. 4.50<br />
SC-BF - Bass Drum Felt Strip -<br />
A 2-1/4” wide felt strip mounts inside<br />
<strong>drum</strong> head. Fits up to 26” <strong>drum</strong>.<br />
2 pk. 5.95<br />
SC-DPP - Double Pedal Pad - The<br />
same material used on our SC-BPL<br />
for use with double pedals.<br />
2 pk. 5.50<br />
SC-BDPM - Bass Drum Platform<br />
Mount - Fits 18” <strong>and</strong> 20” bass <strong>drum</strong>s.<br />
It comes with a clamp that attaches<br />
the device to a bass <strong>drum</strong>’s (batter<br />
side) counter hoop. This helps<br />
prevent movement of any kind.<br />
This mount raises a bass <strong>drum</strong><br />
2” off the floor. 1 pk. 39.95<br />
SC-BDTR/L - Bass Drum T-H<strong>and</strong>le<br />
Tension Rods - 4-1/4” (108mm) long<br />
x 6mm dia. 4 pk. 9.95<br />
SC-BDPM<br />
SC-BDTR/L<br />
SC-BDTR/S<br />
SC-4402<br />
SC-BDTR/S - Bass Drum T-H<strong>and</strong>le<br />
Tension Rods - 4-1/4” (108mm) long<br />
x 7/32” dia. 4 pk. 15.95<br />
SC-BDKR/L - Bass Drum Key Rod -<br />
4-3/16” (106mm) long x 6mm dia.<br />
4 pk. (See chart on pg. 4 for<br />
additional info.) 7.50<br />
SC-BDKR/S - Bass Drum Key Rod -<br />
4-3/16” (106mm) long x 7/32” dia.<br />
4 pk. 7.95<br />
SC-CH - Bass Drum Claw Hook-<br />
4 pk. 13.50<br />
SC-4402 - Bass Drum Anchor -<br />
Attaches to the bottom of front counter<br />
hoop to prevent bass <strong>drum</strong> “walking.”<br />
Dual reversible tips. 1 pk. 16.95<br />
SC-BS4 - Bass Drum Spurs -<br />
Telescopic bass <strong>drum</strong> spurs.<br />
Angle-adjustable bracket is included.<br />
1 pk. 56.95<br />
SC-BS2<br />
SC-BDKR/S<br />
SC-BS4<br />
SC-BS2 - Lightweight Bass Drum<br />
Spurs - A set of simple <strong>and</strong><br />
lightweight spurs. Solid steel rod with<br />
rubber tips mount into cast<br />
receptacles. 1 pk. 35.95<br />
SC-BS5 - Medium Weight Bass<br />
Drum Spurs - Strong yet lightweight<br />
spur set. Perfect for maximum support<br />
without overkill.<br />
1 pk. 61.95<br />
PEDAL PARTS<br />
SC-BS5<br />
SC-BDKR/L<br />
SC-CH<br />
BASS DRUM PEDAL BEATERS<br />
Hardened steel rods with a flat side<br />
to prevent slipping. Solid felt (1-3/4”<br />
high), lacquered wood dual surface<br />
<strong>and</strong> plastic beaters.<br />
SC-LBDB - Lightweight Bass Drum<br />
Beater - Dual Surface beater with felt<br />
<strong>and</strong> plastic option. Extra lightweight for<br />
faster response. 1 pk. 16.95<br />
NEW
Bass Drum Pedal High-Use<br />
SC-LBDB<br />
Bass Drum Pedal Parts<br />
SC-15F<br />
SC-DSAB<br />
SC-3261<br />
SC-15C<br />
SC-DSB<br />
SC-15A<br />
SC-DSAB - Dual Surface Adjusting<br />
Beater. 1 pk. 26.95<br />
SC-DSB - Dual Surface<br />
Beater. 1 pk. 24.95<br />
SC-3261 - Solid White Felt.<br />
1 pk. 24.95<br />
SC-3262 - Solid Wood Ball.<br />
1 pk. 11.50<br />
SC-BSW - Bass Drum Beater Shaft<br />
Weight - Fits most bass <strong>drum</strong> beaters.<br />
2 pk. 14.95<br />
SC-TS - Bass Pedal Toe Stop - Fits all<br />
<strong>Gibraltar</strong> <strong>and</strong> many manufacturers’<br />
pedal boards. 2 pk. 11.95<br />
Drum Pedal Parts - Heavy-duty<br />
replacement springs/straps for most<br />
popular style pedals.<br />
SC-15F - Universal Spring.<br />
2 pk. 12.95<br />
SC-15A - Universal Pedal Strap.<br />
4 pk. 14.95<br />
SC-3262<br />
BASS DRUM TENSION RODS<br />
6mm - Fits Pearl (prior to 1995), CB, Mapex, <strong>and</strong> many<br />
generic Taiwan-made <strong>drum</strong>s.<br />
7/32" - Fits most other manufacturers' <strong>drum</strong>s with the<br />
exception of Sonor <strong>and</strong> D.W. Fits Pearl bass <strong>drum</strong>s made<br />
after 1995. Fits D.W. bass <strong>drum</strong>s prior to 1996 production.<br />
Bass Drum Tension Rod Lengths - All <strong>Gibraltar</strong> bass<br />
<strong>drum</strong> T-Rods <strong>and</strong> key rods are 4-1/4" (108mm) long. They<br />
fit most manufacturers' bass <strong>drum</strong>s, as previously noted,<br />
with the exception of <strong>drum</strong>s which have extended space<br />
between the hoop <strong>and</strong> lug receptacle. (We recommend<br />
that you measure this space before purchasing.)<br />
Note: At this time, <strong>Gibraltar</strong> does not manufacture tension rods<br />
which fit Sonor or D.W. <strong>drum</strong>s.<br />
NEW<br />
SC-TS<br />
SC-BDHG<br />
SC-GLO<br />
SC-BSW<br />
SC-15C - Generic Spring.<br />
2 pk. 4.95<br />
SC-GLO - <strong>Gibraltar</strong> Pedal Lubricant-<br />
Perfect for use on hi-hat <strong>and</strong> bass <strong>drum</strong><br />
pedals to protect bearings <strong>and</strong> eliminate<br />
squeaks. 1 oz. bottle 3.50<br />
SC-BDHG - Bass Drum Hoop<br />
Guard - Protects lacquer bass <strong>drum</strong><br />
hoops from bass pedal hoop clamp.<br />
2 pk. 5.95<br />
HIGH-USE PEDAL PARTS<br />
SC-2000 - Die Cast Pedal Hinge<br />
w/Screws.1 pk. 7.95<br />
SC-4071 - Prowler Chain w/Master<br />
Link. 1 pk. 15.95<br />
SC-4007 - Avenger II, Intruder II<br />
Chain Assembly. 1 pk. 20.95<br />
SC-3030R - Right Square Connecting<br />
Shaft w/U-Joint. Assembly comes<br />
with 2 SC-0129 6mm Key Screws.<br />
1 pk. 36.95<br />
SC-0009<br />
SC-3030R<br />
SC-3029<br />
SC-4071 SC-4007<br />
SC-0055<br />
SC-2000<br />
SC-3030L<br />
SC-0053 SC-0052<br />
SC-0062 SC-0128<br />
SC-3030L - Left Square Connecting<br />
Shaft w/U-Joint. Assembly comes<br />
with 2 SC-0129 6mm Key Screws.<br />
1 pk. 36.95<br />
SC-3029 - Center Connecting Shaft<br />
Housing. 1 pk. 10.95<br />
SC-0009 - 8mm Wing Screw.<br />
5 pk. 5.50<br />
SC-0055 - Hoop Clamping Tension<br />
Screw. 2 pk. 4.95<br />
SC-0128 - 5mm Key Screw for<br />
U-Joint. 4 pk. (Not shown) 4.95<br />
SC-0129 - 6mm Key Screw for<br />
SC-3030 R <strong>and</strong> L Connecting<br />
Shaft. 4 pk. 4.95<br />
SC-0121 - 8mm Key Screw for<br />
Beater Hub. 4 pk. 3.95<br />
SC-2035 - Rock Plate Screw Kit.<br />
1 pk. 3.95<br />
SC-0129 SC-0121<br />
SC-2035<br />
SC-0062 - Heel Plate Screw Kit.<br />
2 pk.<br />
3.95<br />
SC-0053 - Pedal Spring Tension<br />
Assembly. 2 pk. 5.95<br />
SC-0052 - Pedal Spring<br />
Assembly. 2 pk. 5.95<br />
7
8<br />
Tom Tom Mounting Systems<br />
L-ROD BALLS<br />
SC-LBS SC-LBM SC-LBL<br />
9.5mm 10.5mm 12.7mm<br />
L-RODS<br />
SUPER L-RODS<br />
SC-SLR<br />
10.5mm<br />
L-ROD BALL/ARMS<br />
SC-BALRM<br />
10.5mm<br />
Use with L-rod tom mounts.<br />
L-ROD TOM TOM MOUNTING<br />
SYSTEMS - Choose from several<br />
designs to fit your specific setup.<br />
9.5mm, 10.5mm <strong>and</strong> 12.7mm<br />
L-Rods work with our SC-TL2,<br />
SC-STL2 <strong>and</strong> SC-STL3 tom mounts<br />
<strong>and</strong> many manufacturers’ mounts. (See<br />
chart on the next page.)<br />
L-Rod Balls - These L-rods fit various<br />
manufacturer’s tom mounting systems<br />
(see “Tom Mounting Systems Glossary”<br />
page 9). They can be mounted in any<br />
of the L-rod platforms with post or with<br />
clamp <strong>and</strong> in many manufacturers’<br />
original tom mounting systems.<br />
SC-LBS - Ball with 9.5mm rod.<br />
1 pk. 10.95<br />
SC-LBM - Ball with 10.5mm rod.<br />
1 pk. 10.95<br />
SC-LBL - Ball with 12.7mm rod.<br />
1 pk. 10.95<br />
SC-LR - Small L-Rod - Tom/cowbell<br />
attachment arms fit directly in multi-<br />
L-RODS<br />
SC-LR SC-LRM SC-LRL<br />
9.5mm 10.5mm 12.7mm<br />
SC-DWLR<br />
12.7mm<br />
SC-BALRL<br />
12.7mm<br />
L-ROD Style Mounting Systems<br />
SC-TL2A - 10.5mm Legs<br />
clamp. 12mm x 9.5mm dia.<br />
(Fits SC-STL2 <strong>and</strong> SC-TL2 mounts.)<br />
2 pk. 11.95<br />
SC-LRM - Medium Knurled L-Rod -<br />
12mm x 10.5mm dia. (Fits SC-STL2<br />
<strong>and</strong> SC-STL3 mounts.) 2 pk. 12.95<br />
SC-LRL - Large Knurled L-Rod -<br />
12mm x 12.7mm dia. 2 pk. 13.95<br />
SC-SLR - Super Knurled L-Rod -<br />
26mm to 10.5mm. Fits directly in a<br />
multi-clamp. Extra large dia. for<br />
strength <strong>and</strong> stability. For use with<br />
our SC-STL3 heavy-duty tom bracket.<br />
1 pk. 15.95<br />
SC-DWLR - 26.5mm to 12.7mm<br />
L-Rod - This super L-Rod fits D.W.,<br />
<strong>Gibraltar</strong> <strong>and</strong> some other manufacturers’<br />
L-Rod tom tom brackets.<br />
1 pk. 17.95<br />
SC-BALRM - Ball Arm L-Rod Mount<br />
(Medium) - All-in-one, ready-to-go<br />
10.5mm L-rod with ABS base with<br />
adjustable angle ball, mounted on 7/8”<br />
dia. vertical post. 1 pk. 40.95<br />
L-ROD PLATFORM WITH POST<br />
Use with L-rod balls<br />
SC-SP SC-DP<br />
10” 16”<br />
1”<br />
SC-1BDB<br />
FLOOR<br />
TOM LEGS<br />
SC-TL1A - 9.5mm Legs<br />
1”<br />
SC-SLRM/<br />
SC-SLLRM<br />
L-ROD TOM MOUNTS<br />
SC-STL4<br />
SC-BALRL - Ball Arm L-Rod Mount<br />
(Large) - Similar to the SC-BALRM<br />
except L-rod is 12.7mm dia.<br />
1 pk. 40.95<br />
L-Rod Platforms - Designed to be<br />
used with any L-rod ball mount.<br />
<strong>Gibraltar</strong>’s L-rod platforms allow tom<br />
mounting via bass <strong>drum</strong>s <strong>and</strong> or all<br />
types of st<strong>and</strong>s <strong>and</strong> rack systems.<br />
SC-SP - Single L-Rod Platform -<br />
Single L-rod platform with 1” dia.<br />
vertical post (for single tom mounting).<br />
1 pk. 39.95<br />
SC-DP - Double L-Rod Platform -<br />
Double L-rod platform with 1” dia.<br />
vertical post (for double tom mounting).<br />
1 pk. 58.95<br />
SC-1BDB - 1” Diameter Tom Tom<br />
Bass Drum Bracket -The SC-1BDB<br />
mounts on bass <strong>drum</strong> <strong>and</strong> accepts 1”<br />
dia. tubes. Works with <strong>Gibraltar</strong> tom<br />
mounting posts <strong>and</strong> other manufacturers’<br />
mounting posts with 1” dia. shaft.<br />
Memory lock<br />
included. 1 pk. 35.95<br />
SC-STL3<br />
L-ROD PLATFORMS<br />
WITH CLAMP<br />
SC-SPC<br />
SC-DPC<br />
Use with L-rod balls.<br />
SC-TL2<br />
SC-STL2<br />
SC-LDML<br />
SC-SLRM - Single L-Rod Tom<br />
Mount - Designed to easily mount<br />
a single tom, percussion instrument<br />
or trigger device from an existing st<strong>and</strong>.<br />
L-Rod with ball adjustment gives<br />
incredible adjustability. L-Rod<br />
is 10.5mm in diameter. Holds up to<br />
a 14” x 14” tom. 1 pk. 42.50<br />
SC-SLLRM - Super Large L-Rod<br />
Mount- (Not Pictured) - Same as<br />
SC-SLRM, but with 12.7mm L-rod ball.<br />
1 pk. 42.50<br />
SC-LDML - L-Rod Tom Memory Lock-<br />
Fits knurled L-Rods from 9.5mm to<br />
12.7mm in dia. Made to work with<br />
SC-STL2 & STL3 mounts, but will work<br />
with other manufacturers’ L-Rod<br />
mounting systems. 1 pk. 7.95<br />
SC-STL2 - Heavy-Duty Tom Bracket<br />
with Memory Lock - Accepts 9.5mm to<br />
12.7mm L-Rods. Perfect for use with<br />
R.I.M.S. <strong>and</strong> <strong>Gibraltar</strong> TSS mounting<br />
systems. Similar to SC-STL3 but with<br />
two <strong>drum</strong> key bolts. 1 pk. 33.95<br />
NEW
7/8” Dia. Style Mounting Systems Hex Style System<br />
PLATFORM MOUNTABLE 7/8”<br />
TOM TOM ARMS<br />
10”<br />
10”<br />
BASS DRUM MOUNTABLE<br />
7/8” TOM TOM ARM<br />
700HA SC-BA78EL<br />
SC-78UA<br />
SC-4429<br />
10”<br />
6”<br />
6”<br />
SC-BA78<br />
16”<br />
6”<br />
1”<br />
SC-PM<br />
SC-STL3 - Super Tom Mount with<br />
Wing Screw <strong>and</strong> Memory Lock -<br />
Similar to the SC-STL2, this L-rod tom<br />
mount is tightened via a large wing<br />
screw. It also comes with a memory<br />
lock which fits on L-rods. Fits 9.5mm to<br />
12.7mm L-rods. 1 pk. 33.95<br />
SC-STL4 - L-Rod Tom Mount -<br />
Chrome L-Rod tom mount is heavy duty<br />
yet small in size <strong>and</strong> lightweight. Fits<br />
9.5mm to 12.7mm L-rods.<br />
1 pk. 34.95<br />
SC-TL2 - Tom/Floor Tom Bracket -<br />
Drum mount bracket to fit 9.5mm or<br />
10.5mm tom arms or floor tom legs.<br />
Wing screw/eye bolt adjustments.<br />
1 pk. 14.50<br />
SC-SPC - Single L-Rod Platform with<br />
Clamp - Single L-rod platform with<br />
adjustable multi clamp. (Multi-clamp fits<br />
up to 1” dia. post.) 1 pk. 36.95<br />
SC-DPC - Double L-Rod Platform<br />
with Clamp - Double L-rod platform<br />
with adjustable multi clamp. (Multiclamp<br />
fits up to 1” dia. post.)1 pk. 50.95<br />
13.8”<br />
6”<br />
GIBRALTAR<br />
“ULTRA<br />
ADJUST”<br />
SYSTEM<br />
SC-TL1A - 9.5mm Floor Tom Legs -<br />
21” angled legs (without bracket).<br />
Set of 3 (9.5mm) 20.95<br />
SC-TL2A - Floor Tom Legs - 21”<br />
angled legs (without bracket).Chromeplated.<br />
Set of 3 (10.5mm) 22.95<br />
7/8” DIAMETER TOM TOM<br />
MOUNTS - Use 7/8” dia. pipe-style<br />
arms. Both bass <strong>and</strong> tom brackets<br />
accept 7/8” pipe receptacles.<br />
SC-700HA - Tom Arm - Double 7/8”<br />
dia. arms joined by a multi-angle<br />
ratchet adjustment. 1 pk. 27.95<br />
SC-BA78 - Ball Arm 7/8” dia. Tom<br />
Arm - All-in-one, ready-to-go 7/8”<br />
dia. tom arm with ABS base with<br />
adjustable angle mounted on a 1/2”<br />
dia. vertical post. Recommended for<br />
use with various manufacturers’ rack<br />
systems. 1 pk. 40.95<br />
7/8” TOM TOM MOUNTS<br />
SC-670TB<br />
SC-670BB<br />
TOM MOUNTING SYSTEMS GLOSSARY<br />
HEX ROD MOUNTS<br />
SC-BAHR<br />
SC-750TB<br />
7/8" Diameter Mounts - Fits most Pearl, CB, Mapex, <strong>and</strong> other generic<br />
Taiwan-made <strong>drum</strong>s.<br />
Hex Rod Mounts - Fits some Yamaha <strong>drum</strong>s <strong>and</strong> Yamaha electronic pads.<br />
L-Rod Mounts - Fits some D.W., GMS, Gretsch, Legend, Premier, Noble &<br />
Cooley, Ludwig, <strong>and</strong> Tama models (check L-Rod diameter prior to purchase.)<br />
L-ROD DIAMETERS<br />
9.5mm - Fits most cowbells, percussion mounts, floor tom brackets, old Ludwig<br />
models, <strong>and</strong> <strong>Gibraltar</strong> SC-STL2 <strong>and</strong> SC-STL3 tom brackets.<br />
10.5mm - Fits most contemporary L-Rod mounts for Legend, GMS, Noble<br />
& Cooley, Premier, Ludwig, <strong>and</strong> Tama. Fits SC-STL2 <strong>and</strong> SC-STL3 brackets <strong>and</strong><br />
some Yamaha electronic trigger pads.<br />
12.7mm - Fits D.W. <strong>and</strong> Gretsch brackets <strong>and</strong> <strong>Gibraltar</strong> SC-STL2 <strong>and</strong> SC-STL3<br />
brackets.<br />
TOM BRACKET<br />
<strong>Gibraltar</strong> tom brackets are designed to fit primarily on <strong>Gibraltar</strong> GTTS<br />
mounting systems (on metal plate). If you plan to mount tom brackets directly on<br />
a <strong>drum</strong> shell, you may need longer mounting screws, depending on the<br />
thickness of your shell.<br />
BASS DRUM BRACKET/RECEPTACLES<br />
These are designed to be mounted on a bass <strong>drum</strong> shell <strong>and</strong> come with extended<br />
length mounting screws, washers, <strong>and</strong> fasteners to accommodate most <strong>drum</strong><br />
shell thicknesses.<br />
TOM ARMS<br />
No other <strong>drum</strong> company offers as many options for mounting a tom tom as<br />
<strong>Gibraltar</strong>. We suggest you consider the following points before purchasing a<br />
<strong>Gibraltar</strong> tom arm:<br />
• Size <strong>and</strong> weight of <strong>drum</strong> to be mounted.<br />
• Positioning requirements (fixed or moveable).<br />
• Attachment point of tom arm (from st<strong>and</strong>, directly from rack, from<br />
bass <strong>drum</strong>, etc.).<br />
• Cost of all <strong>parts</strong> needed to complete mounting system (example:<br />
cymbal st<strong>and</strong>, multi-clamp, tom arm, tom bracket). Choose the most cost<br />
effective, physically-secure system. 9<br />
SC-4429 - Stabilizer Platform -<br />
Three-way clamp accepts 1/2” through<br />
1” dia. tubes. 1 pk. 35.95<br />
SC-78UA - 7/8” Diameter Tom Arm<br />
with Ultra Adjust - <strong>Gibraltar</strong>’s<br />
exclusive “Ultra Adjust” system adds<br />
additional flexibility to a st<strong>and</strong>ard 7/8”<br />
dia. tom arm. Recommended for use<br />
with various manufacturers’ rack<br />
systems. 1 pk. 55.95<br />
SC-BA78EL - Ball Arm 7/8” dia.<br />
Tom Arm with Extended Height<br />
Capabilities - Same mount as<br />
SC-BA78 with longer vertical arm.<br />
Recommended for use when mounting<br />
in SC-670BB or original manufacturers’<br />
bass <strong>drum</strong> mount. 1 pk. 46.95<br />
SC-PM - Platform Mount - Perfect<br />
match for cymbal boom arms. Mounts<br />
two or more items from racks or st<strong>and</strong>s.<br />
1 pk. 37.95<br />
SC-670TB - Tom Bracket - Single 7/8”<br />
dia. receptacle. 1 pk. 20.95<br />
SC-670BB - Bass Bracket - Double<br />
7/8” dia. receptacle. 1 pk. 37.95<br />
HEX ROD TYPE TOM TOM<br />
MOUNTS<br />
SC-BAHR - Ball Arm with Hex Rod -<br />
All-in-one, ready-to-go hex rod<br />
tom arm with ABS ball with adjustable<br />
angle mounted on a 7/8” dia. vertical<br />
post. Recommended for use with<br />
various manufacturers’ rack systems<br />
or original manufacturers’ tom platform<br />
mounts. 1 pk. 39.95<br />
SC-750TB - Tom Bracket - Single<br />
hexagonal rod receptacle. 1 pk. 15.95
10<br />
<strong>Gibraltar</strong><br />
Tom Suspension<br />
System<br />
Shown in photo:<br />
SC-GTS 12/6<br />
Tom mount not included<br />
Shown in photo:<br />
SC-GTS8/4<br />
GIBRALTAR TOM SUSPENSION SYSTEM<br />
Fits 3/4” dia.<br />
cymbal arm<br />
SC-BJEA<br />
3/4”<br />
SC-GCA<br />
The GTSS is a proven mounting system for tom toms from 8” to 16” in diameter.<br />
This system can also be used to mount snare <strong>drum</strong>s. While the GTSS is new to the<br />
<strong>Gibraltar</strong> accessory line, its design has been around for 20 years. The GTSS not<br />
only is an excellent mounting system, it actually improves the sound of a <strong>drum</strong>.<br />
Available models <strong>and</strong> sizes:<br />
Part No. Description Retail<br />
SC-GTS 8/4 8” / 4 Lug $42.95<br />
SC-GTS 8/5 8” / 5 Lug $42.95<br />
SC-GTS 10/5 10” / 5 Lug $44.95<br />
SC-GTS 10/6 10” / 6 Lug $46.95<br />
SC-GTS 12/5 12” / 5 Lug $48.95<br />
SC-GTS 12/6 12” / 6 Lug $49.95<br />
SC-GTS 13/6 13” / 6 Lug $52.95<br />
SC-GTS 14/6 14” / 6 Lug $54.95<br />
SC-GTS 14/8 14” / 8 Lug $58.95<br />
SC-GTS 16/6 16” / 6 Lug $62.95<br />
SC-GTS 16/8 16” / 8 Lug $64.95<br />
Note: GTSS is not available for 15” diameter <strong>drum</strong>s.<br />
Availability may vary from country to country<br />
Cymbal Arms &<br />
Mounting Systems<br />
NEW<br />
NEW<br />
SC-MB<br />
17.3”<br />
SC-XHAT<br />
SC-EA100<br />
13”<br />
17.3”<br />
SC-MB - Mini Boom (Hideaway<br />
Boom) - This small boom doubles<br />
as a straight cymbal arm or a cymbal<br />
boom arm. 3/4” dia. vertical shaft.<br />
1 pk.<br />
49.95<br />
SC-4425A-1 - Straight Cymbal Arm -<br />
3/4” dia. shaft by 17.3” (long).<br />
1 pk. 36.95<br />
SC-BJEA - Ball Joint Extension<br />
Arm - Allows cymbal arm to be<br />
mounted in ball arm socket. Can<br />
be used on <strong>Gibraltar</strong> or other manuffacturers’<br />
L-rod platform mounts.<br />
1 pk. 27.95<br />
SC-XHAT - Mini X-Hat Attachment<br />
-Mounts on any cymbal tilter to allow<br />
mounting of extra hi-hats.<br />
1 pk. 39.95<br />
SC-GCA - Grabber Cymbal Arm -<br />
Straight cymbal arm mounted to a<br />
geared ratchet adjustment <strong>and</strong><br />
attached to a basic grabber clamp<br />
(SC-BGC). 1 pk. 45.95<br />
SC-4425A-1<br />
SC-PM<br />
1”<br />
NEW<br />
MS-XLR<br />
MS-TC<br />
NEW<br />
SC-EA100 - Extension Arm -<br />
Universal extension arm with 360˚<br />
ratchet plus a multi-clamp attachment.<br />
Allows infinite positioning for almost<br />
any piece of <strong>drum</strong> hardware.<br />
(1” dia. tube) 1 pk. 40.95<br />
SC-PM - Platform Mount - Perfect<br />
match for the SC-4425MB. Mounts<br />
two or more items from one rack or<br />
st<strong>and</strong> multi-clamp. 1 pk. 37.95<br />
MS-TC - Tri-Cymbal Mounting<br />
System - Mounts three cymbals in<br />
any way imaginable. Includes (2)<br />
SC-CLRA Cymbal L-rod Attachments<br />
(see page 12), (1) SC-TPBA Two-Point<br />
Boom Attachment <strong>and</strong> (1) SC-LBRA<br />
Long Boom Ratchet Assembly (See<br />
page 11). 1pk. 119.50<br />
MS-XLR - X-Hat/L-rod Mounting<br />
System - Combines the mounting of a<br />
9707X auxiliary hat with an additional<br />
SC-PLRA Percussion L-rod<br />
Attachment (See page 12).<br />
1pk. 115.50<br />
NEW<br />
NEW
SC-4425B-1<br />
SC-CSA<br />
7/8”<br />
13.8”<br />
SC-4425B-1 - Cymbal Boom Arm - 7/8”<br />
dia. post with a cymbal boom arm that is<br />
unweighted, knurled <strong>and</strong> fully adjustable.<br />
1 pk. 49.95<br />
SC-CBS - Cymbal Boom Smooth -<br />
The same boom assembly as the<br />
SC-4425B-1 with smooth boom arm.<br />
Makes quick position adjustments<br />
easier. 1 pk. 44.95<br />
SC-RMH - Replacement Microphone<br />
Holder - Left cast assembly for cymbal<br />
arms. Converts cymbal tilter to<br />
microphone holder. Comes with two<br />
thread sizes to fit most manufacturers’<br />
mic clips (holders). SC-RMH fits on<br />
<strong>Gibraltar</strong> SC-4425B-1, 4425MB, GCA,<br />
CBS, 4425A-1, <strong>and</strong> MB cymbal arms.<br />
1 pk. 14.95<br />
SC-CBS<br />
7/8”<br />
13.8”<br />
SC-BCSA<br />
SC-CSA - Cymbal Stacking<br />
Attachment - Allows two cymbals<br />
(of any size) to be placed on top of<br />
each other with approximately 8” of<br />
clearance between them. Mounts<br />
on most 6mm <strong>and</strong> 8mm cymbal st<strong>and</strong><br />
tops. (No special screws or mounting<br />
pieces required.) 1 pk. 35.95<br />
SC-BCSA - Boom Cymbal Stacking<br />
Attachment - Fits any manufacturer’s<br />
cymbal tilter. Fully Adjustable.<br />
1 pk. 65.50<br />
NEW<br />
SC-RMH<br />
NEW<br />
NEW<br />
3/4”<br />
SC-4425MB<br />
7/8”<br />
17.3”<br />
10”<br />
SC-SBS<br />
SC-4425MB - Mini Cymbal Boom<br />
Arm - Perfect for mounting splash,<br />
small effect cymbals or bar chimes.<br />
10” vert. shaft with 14” horiz. shaft<br />
long enough to position small cymbals<br />
but short enough to stay out of the<br />
way. Smooth cymbal arm. 7/8” dia.<br />
shaft. 1 pk. 39.95<br />
SC-SBS - Super Boom Small - 20”<br />
unweighted boom with 360˚ cymbal<br />
tilter. 3/4” dia. vertical shaft. The<br />
<strong>Gibraltar</strong> super boom gets a thicker<br />
tube wall for additional strength when<br />
being clamped.<br />
1 pk. 63.50<br />
SC-SBRA - Short Boom Ratchet<br />
Arm - Knurled 12.7mm ratchet arm<br />
mounts on any cymbal boom<br />
assembly. 1 pk. 19.50<br />
<strong>Gibraltar</strong>’s exclusive 360˚<br />
cymbal tilter mechanism for<br />
infinite positioning.<br />
NEW<br />
IMPROVED<br />
SC-SBRA<br />
Memory Locks<br />
SC-ML78<br />
SC-LBRA - Long Boom Ratchet<br />
Arm - Knurled 12.7mm ratchet arm<br />
mounts on any cymbal boom<br />
assembly. 1 pk. 21.50<br />
SC-TPBA -Two-Point Boom - 3/4"<br />
dia. Vertical shaft. 17.3" long. Fits<br />
most cymbal st<strong>and</strong>s <strong>and</strong> multi clamps<br />
1 pk. 29.50<br />
MEMORY LOCKS<br />
SC-LBRA<br />
SC-TPBA<br />
SC-ML34<br />
SC-ML1<br />
SC-ML34 - 3/4” dia. 4 pk. 19.95<br />
SC-ML78 - 7/8” dia. 4 pk. 19.95<br />
SC-ML1 - 1” dia. 4 pk. 19.95<br />
11<br />
NEW<br />
NEW
12<br />
Multi-Clamps &<br />
Spanner Parts<br />
SC-4425G<br />
GPR-SSS<br />
SC-PUGC<br />
NEW<br />
SC-4425G - St<strong>and</strong>ard Grabber<br />
Clamp - Double clamp assembly.<br />
Accepts 1/2” through 1” dia.<br />
1 pk. 28.50<br />
GPR-SSS - Super Spanner System -<br />
46” curved bar connects to your<br />
existing cymbal st<strong>and</strong>s via two<br />
SC-GRSSMC super multi-clamps.<br />
Total clamps included are:<br />
(4) SC-GRSSMC,<br />
(2) SC-GRSMC.<br />
1 pk. 214.95<br />
SC-PUGC - Pearl-Type Grabber<br />
Clamp - Angled center post with a<br />
rotating clamp at each end.<br />
1 pk. 38.50<br />
SC-BGC - Basic Grabber Clamp -<br />
Economical version of SC-4425G<br />
without hinged clamps.<br />
1 pk. 24.95<br />
NEW<br />
NEW<br />
NEW<br />
SC-UGC<br />
SC-BGC<br />
SC-LRAC<br />
SC-UGC<br />
SC-PLRA - Percussion L-rod<br />
Attachment - Grabber multi-clamp<br />
with two L-rod adjustments can mount<br />
on any cymbal arm or L-rod. Fully<br />
Adjustable 9.5mm to 10.5mm eye<br />
bolts. 1 pk. 35.95<br />
SC-LRAC - L-rod Adjustment Clamp<br />
Grabber multi-clamp with L-rod that<br />
allows mounting of bells, blocks <strong>and</strong><br />
other <strong>accessories</strong> to a set up. Fully<br />
Adjustable. 1 pk. 34.95<br />
SC-CLRA - Cymbal L-rod<br />
Attachment - Grabber multi-clamp<br />
with two L-rod adjustments can mount<br />
on any cymbal arm or L-rod. Fully<br />
Adjustable 9.5mm to 10.5mm eye<br />
bolts. 1 pk 35.95<br />
SC-UGC - Universal Grabber<br />
Clamp - Double clamp accepts 5/8”<br />
through 1-1/4” dia. arms.<br />
1 pk. 47.95<br />
SC-CLRA<br />
SC-PLRA<br />
SC-SUGC<br />
SC-SSMC<br />
SC-4429 - Stabilizer Platform -<br />
Three-way clamp accepts 1/2” through<br />
1” pipe dia.<br />
1 pk. 34.95<br />
SC-SSMC - Super Spanner<br />
Multi-Clamp -<br />
Double quick-release clamp that<br />
secures spanner bars <strong>and</strong> <strong>accessories</strong><br />
at a right angle to each other. Each<br />
side of the multi-clamp accepts from<br />
5/8” to 1-1/4” dia. tubes.<br />
1 pk. 44.50<br />
SC-SUGC - Super Universal<br />
Grabber Clamp - Features double<br />
multi-clamps which accept 5/8”<br />
through 1-1/2” dia. arms <strong>and</strong> rack<br />
tubes. The multi-clamp gripping<br />
surface has been made 2-1/2 times<br />
larger (same multi-section as the<br />
SC-GRSSMC).<br />
1 pk. 55.95<br />
NEW<br />
NEW<br />
SC-4429<br />
WING NUTS/CYMBAL SLEEVE<br />
SC-13G - Small (6mm). 5 pk. 6.95<br />
SC-13E - Medium (8mm). 5 pk. 6.95<br />
SC-13P - Large (8mm). 5 pk. 8.95<br />
Cymbal Sleeves - Sleeves fit over<br />
threaded portion of cymbal mount to<br />
protect cymbals. Several styles:<br />
SC-PC698 - Straight (6mm).<br />
12 pk. 3.95<br />
SC-8CS - Straight (8mm).<br />
12 pk. 4.50<br />
SC-19A - Flanged base (8mm) for<br />
<strong>Gibraltar</strong> 9500 Cymbal tilters (longer<br />
shaft) 4 pk. 5.50<br />
SC-19B - Flanged base (8mm).<br />
4 pk. 5.50
Cymbal St<strong>and</strong> Parts<br />
& Rubber Feet<br />
SC-19B<br />
SC-PC698<br />
SC-PC08<br />
SC-8CS<br />
SC-TCWN/6 - 6mm T-Style ABS<br />
Cymbal Wing Nut - Same design as<br />
the SC-TCWN. Fits in place of 6mm<br />
cymbal wing screw. 4 pk. 3.95<br />
SC-TCWN - 8mm T-Style Wing<br />
Nut - ABS wing screw <strong>and</strong> cymbal<br />
shaft protector all in one. 4 pk. 3.95<br />
CYMBAL FELTS<br />
SC-19A<br />
SC-13P<br />
NEW<br />
SC-CFL-4<br />
SC-13E<br />
SC-CT<br />
SC-CFS-4 - Small 3/4” thick.<br />
4 pk. 2.95<br />
SC-CFL-4 - Large 1-1/2” thick.<br />
4 pk. 3.50<br />
SC-MCW - Metal Cymbal Washers -<br />
Used on cymbal tilters. Fits 8mm.<br />
4 pk. 4.50<br />
SC-RMH<br />
SC-PC13<br />
NEW<br />
SC-13G<br />
SC-PC07<br />
SC-CFS-4<br />
SC-MCW<br />
SC-TCWN/6<br />
SC-TCWN<br />
SC-PC09<br />
SC-CT - Auxiliary Cymbal Tilter -<br />
Full cymbal tilter assembly fits on most<br />
cymbal ratchet arms for additional<br />
cymbal mounting. 8mm tilter. 1/4” tension<br />
rod head can be used to tighten<br />
once set at desired position.<br />
1 pk. 23.95<br />
SC-RMH - Replacement Microphone<br />
Holder - Left cast assembly for<br />
cymbal arms. Converts cymbal tilter<br />
to microphone holder. Comes with<br />
two thread sizes to fit most manufacturers’<br />
mic clips (holders). SC-RMH<br />
fits on <strong>Gibraltar</strong> SC-4425B-1, 4425MB,<br />
GCA, CBS, 4425A-1, <strong>and</strong> MB cymbal<br />
arms. 1 pk. 14.50<br />
RUBBER FEET<br />
SC-PC07 - Fits all 9000 Series<br />
<strong>Gibraltar</strong> st<strong>and</strong>s.<br />
3 pk. 6.50<br />
SC-PC08 - Rubber Feet for Elliptical<br />
Legs - Fits all 7000 Series <strong>Gibraltar</strong><br />
st<strong>and</strong>s. 3 pk. 8.95<br />
Hi-Hat<br />
Parts & Accessories<br />
SC-CLF-4<br />
SC-4421<br />
SC-4980J<br />
SC-PC09 - Round <strong>Gibraltar</strong> Rubber<br />
feet - Fits 9500 <strong>Gibraltar</strong> st<strong>and</strong>s <strong>and</strong><br />
other manufacturers’ double braced<br />
st<strong>and</strong>s.<br />
3 pk. 9.50<br />
SC-PC13 - Fits CB 3000 <strong>and</strong> various<br />
entry level st<strong>and</strong>s.<br />
3 pk. 4.95<br />
HI-HAT CLUTCHES<br />
SC-4421D<br />
SC-HF-4<br />
SC-1655-4<br />
SC-RP171<br />
SC-CLF-4 - Clutch Felts. 4 pk. 2.95<br />
SC-4421 - Universal - Fits CB<br />
Percussion 3207 <strong>and</strong> most inexpensive<br />
st<strong>and</strong>s. (6mm rods) 1 pk. 12.50<br />
SC-4421D - St<strong>and</strong>ard - Fits Rock<br />
<strong>Hardware</strong> by <strong>Gibraltar</strong> <strong>and</strong> most<br />
moderately priced st<strong>and</strong>s.<br />
(8mm rods) 1 pk. 11.95<br />
SC-4420 - Professional -<br />
Fits <strong>Gibraltar</strong> <strong>and</strong> most<br />
professional st<strong>and</strong>s. (8mm rods)<br />
1 pk. 14.95<br />
SC-4420<br />
SC-4420S<br />
SC-DC<br />
SC-DC - Hi-Hat Drop Clutch -<br />
Disengage <strong>and</strong> drop top cymbal by<br />
hitting clutch with <strong>drum</strong>stick. Step on<br />
the pedal <strong>and</strong> clutch attaches itself at<br />
original position. (8mm rods)<br />
1 pk. 23.95<br />
SC-4980J - Hi-Hat Cymbal Seat -<br />
Fits <strong>Gibraltar</strong> <strong>and</strong> most professional hihat<br />
st<strong>and</strong>s w/1” or 5/8” tube.<br />
1 pk. 7.50<br />
SC-HF-4 - Cup Felts. 4 pk. 3.95<br />
SC-1655-4 - Cup Washer. 4 pk. 5.95<br />
SC-4420S - Super Clutch - Utilizes<br />
our “Super Grip” clamping mechanism<br />
which will not scar the hi-hat pull rod.<br />
Fits 8mm rod. 1 pk. 16.95<br />
SC-RP171 - Hi-Hat Attachment<br />
Clamp - Attaches to bass <strong>drum</strong><br />
counter hoop to support the hi-hat<br />
when used with a double bass<br />
setup. 1 pk. 33.95<br />
13
14<br />
H<strong>and</strong> Percussion Mounting Systems<br />
6”<br />
10”<br />
SC-CBPM<br />
SC-BM<br />
SC-GM<br />
SC-BM - Block Mount -<br />
Allows for mounting of various wood<br />
blocks. Mount exp<strong>and</strong>s from 6” to 10”<br />
to fit different size blocks. 1 pk. 49.95<br />
SC-GM - Guiro Mount - Allows for<br />
mounting of most Toca <strong>and</strong> other<br />
Guiros via an adjustable mounting<br />
system. Guiro can be played while<br />
mounted. 1 pk. 37.95<br />
SC-CBPM - Cowbell Bass Pedal<br />
Mount - Allows mounting of most<br />
br<strong>and</strong>s of cowbells, blocks or<br />
tambourines to an adjustable floor<br />
st<strong>and</strong>, which also accepts most<br />
br<strong>and</strong>s of bass pedals.<br />
1 pk. 55.95<br />
SC-SM - Shakere Mount -<br />
Allows for mounting of most Shakeres.<br />
Shakeres can be played while<br />
mounted. 1 pk. 45.95<br />
SC-DJM - Djembe Mounting Kit for<br />
Double Conga St<strong>and</strong> - Fits <strong>Gibraltar</strong><br />
<strong>and</strong> most other manufacturers’ double<br />
conga st<strong>and</strong>s. Allows mounting of<br />
Djembe <strong>drum</strong> on double conga st<strong>and</strong>.<br />
1 pk. 29.95<br />
SC-SM<br />
SC-DJM<br />
SC-BST<br />
13.8”<br />
1”<br />
The SC-BST comes with<br />
bolt kit to fit most makes<br />
of professional bongos.<br />
SC-CLW<br />
SC-BST - Bongo St<strong>and</strong> Top - The top<br />
section of 9516 Deluxe Bongo St<strong>and</strong>.<br />
Allows sturdy mounting of<br />
bongos to rack systems or double<br />
conga st<strong>and</strong>s. Fits 1/2” to 1-1/2” dia.<br />
bars.<br />
1 pk. 50.50<br />
SC-BDCM<br />
SC-BDCM - Bongo Dbl. Conga<br />
St<strong>and</strong> Mount - Attaches to any dbl.<br />
conga st<strong>and</strong> to allow secure mounting<br />
of bongos w/the same top as the<br />
<strong>Gibraltar</strong> 7516 bongo st<strong>and</strong>.<br />
1 pk. 105.50<br />
SC-CLW - Conga Lug Wrench -<br />
Heavy-duty ratchet assembly with a<br />
1/2” socket which fits most manufacturers’<br />
congas <strong>and</strong> bongos for easy,<br />
accurate tuning.<br />
1 pk. 17.95
NEW<br />
SC-MAT<br />
SC-101<br />
SC-TC<br />
SC-101 - Tambourine Holder -<br />
Attaches to 9.5mm or 10.5mm rod<br />
to mount most tambourines.<br />
1 pk. 16.50<br />
SC-MAT - Medium Accs. Table With<br />
Mount - Attaches to a cymbal st<strong>and</strong><br />
or rack bar. 12” x 18”, with 1” high<br />
borders <strong>and</strong> padded surface. 90.50<br />
SC-SAT - Small Accs. Table With<br />
Mount - Attaches to a cymbal st<strong>and</strong><br />
or rack bar. 12” x 12”, with 1” high<br />
borders <strong>and</strong> padded surface. 80.50<br />
SC-TC - Heavy-Duty Triangle Clip -<br />
Clothespin-style clamp for attaching<br />
triangle. Vinyl coated tip for a secure<br />
grip. 1 pk. 10.50<br />
SC-TLR - Triangle L-rod - 9.5mm to<br />
10.5mm L-rod with pre-installed nylon<br />
cord can be mounted on most multi<br />
clamps to allow better mounting of triangles.<br />
1 pk. 9.50<br />
SC-SAT<br />
NEW<br />
SC-TLR<br />
9.5mm<br />
SC-4425D-1 - Cowbell/Tom Arm -<br />
7/8” dia. post topped with an L-Rod for<br />
mounting cowbells <strong>and</strong> other <strong>accessories</strong>.<br />
L-Rod also fits some tom<br />
mounts <strong>and</strong> electronic <strong>drum</strong>s. 5/16”<br />
(9.5mm) dia. L-Rod accepts most<br />
cowbells, blocks, tambourines, etc.<br />
1 pk. 33.95<br />
SC-DTM - Double Mini Timbale<br />
Mount - Fits 6”, 8” or 10” Toca mini<br />
timbales <strong>and</strong> holds two cowbells,<br />
woodblocks, etc. Clamps onto existing<br />
st<strong>and</strong> via rack style cast multi-clamp<br />
fitting. Fits 1/2” to 1-1/4” dia. st<strong>and</strong>s.<br />
1 pk. 64.50<br />
SC-4425D-1<br />
SC-DTM<br />
SC-AM4 - Four-Post Mount -<br />
We’ve added a cast multi-clamping<br />
fixture to this popular mounting device,<br />
which guarantees secure <strong>and</strong> even<br />
mounting to cymbal st<strong>and</strong>s <strong>and</strong> other<br />
fixed vertical tubes. Holds up to eight<br />
<strong>accessories</strong> top or bottom. Use with<br />
other accessory holders (SC-CA,<br />
SC-WCA, etc.) to exp<strong>and</strong> mounting<br />
possibilities. 1 pk. 60.95<br />
SC-AM1 - Single Post Mount -<br />
Attaches to st<strong>and</strong> to provide top or<br />
bottom mounting. Use with other<br />
accessory holders to exp<strong>and</strong> mounting<br />
possibilities. 1 pk. 25.95<br />
SC-AM4<br />
GAB-12<br />
SC-EB<br />
SC-4795<br />
9.5mm<br />
SC-AM1<br />
GAB-20<br />
SC-EB - Eye Bolt Kit - Wing nut,<br />
washer <strong>and</strong> bolt set fits 9.5mm to<br />
10.5mm shafts. 2 pk. 7.95<br />
SC-4795 - Cowbell U-Clamp -<br />
St<strong>and</strong>ard “U” style clamp with wing<br />
screw to fit post on cowbell holder.<br />
2 pk. (Fits 9.5mm shaft.) 6.95<br />
The GAB-12 <strong>and</strong> GAB-20 mounting<br />
platforms utilize a cast multi-clamp<br />
fixture to guarantee secure <strong>and</strong> even<br />
mounting to cymbal st<strong>and</strong>s <strong>and</strong> other<br />
fixed vertical tubes.<br />
GAB-12 - 12” long, holds 6 items.<br />
1 pk. 40.50<br />
GAB-20 - 20” long, holds 10 items.<br />
1 pk. 45.50<br />
15
16<br />
NEW<br />
H<strong>and</strong> Percussion Mounting Systems<br />
SC-WCM<br />
NEW<br />
MS-SP<br />
SC-WCM - Wind Chime Mount -<br />
Our SC-AM1 & SC-WCA are matched<br />
up to make the ultimate wind chime<br />
mount. Multi clamp section fits 1/2”<br />
to 1-1/2” dia. Wind chime arm is held<br />
via eye bolt mechanism.<br />
1 pk. 39.95<br />
SC-ABM - Agogo Bell Mount -<br />
Fits on 9.5mm or 10.5mm knurled<br />
post. Accomodates most manufacturers’<br />
mountable agogo bells.<br />
1 pk. 17.50<br />
MS-SP - Splash/Percussion<br />
Mounting System -<br />
Mounts two percussion <strong>accessories</strong><br />
<strong>and</strong> one small cymbal in any way<br />
imaginable. Includes two SC-PLRA<br />
Percussion L-rod Attachments (see<br />
page 12), (1) SC-TPBA Two-Point<br />
Boom Arm <strong>and</strong> (1) SC-SBRA Short<br />
Boom Arm. (See page 11).<br />
1 pk. 119.50<br />
SC-ABM<br />
13.8”<br />
SC-WCA<br />
SC-CA<br />
NEW<br />
SC-170<br />
SC-WCA - Chime Arm For<br />
Accessory Mount - Attaches to<br />
SC-AM one or four accessory mounts<br />
for adding wind chimes.<br />
1 pk. 9.95<br />
SC-CA - Cymbal Arm for Accessory<br />
Mount - Attaches to SC-AM one or<br />
four accessory mounts for adding<br />
accent cymbals.<br />
1 pk. 10.95<br />
SC-170 - Boom Cowbell/Tom Arm -<br />
Boom arm topped with a 5/16”<br />
(9.5mm) dia. L-Rod for mounting<br />
cowbells <strong>and</strong> <strong>accessories</strong>.<br />
1 pk. 59.50<br />
SC-LRAC<br />
9.5mm<br />
SC-BDHC<br />
SC-WCC<br />
SC-BDHC - Bass Drum Hoop<br />
Clamp - Heavy-duty percussion<br />
mount which clamps on a bass <strong>drum</strong><br />
counter hoop. Provides 9.5mm<br />
knurled post for mounting bells,<br />
blocks, <strong>and</strong> other percussion<br />
instruments.<br />
1 pk. 38.95<br />
SC-WCC - Wood Block/Cowbell<br />
Holder for Accessory Mount -<br />
Attaches to SC-AM accessory mounts<br />
for adding wood blocks <strong>and</strong> cowbells.<br />
1 pk. 14.50<br />
SC-LRAC - L-rod Adjustment Clamp<br />
Grabber multi-clamp with L-rod that<br />
allows mounting of bells, blocks <strong>and</strong><br />
other <strong>accessories</strong> to a set up. Fully<br />
Adjustable. 1 pk. 34.95<br />
NEW<br />
SC-RP269<br />
SC-RP269 - Bass Drum Double<br />
Percussion Mount - Lightweight, dual<br />
purpose percussion mount clamps on<br />
a bass <strong>drum</strong> counter hoop. Provides<br />
9.5mm knurled post for mounting bells<br />
<strong>and</strong> other percussion instruments <strong>and</strong><br />
two mini L-rods for traditional wood<br />
block mounting.<br />
1 pk. 16.50
SC-CM<br />
SC-268R<br />
SC-CPM<br />
SC-CPM - Cymbal Post Mount -<br />
Cymbal holder with heavy-duty tilter<br />
assembly <strong>and</strong> 8mm wing screw.<br />
Mounts on 9.5mm shaft. Fits on<br />
SC-4425D-1, 170, GAB-20, DTM,<br />
AM-1, AM-4 <strong>and</strong> BDHC.<br />
1 pk. 40.50<br />
SC-CM - Cabasa Mount - Allows<br />
a h<strong>and</strong>-held cabasa to be placed<br />
in a padded holder for easy access.<br />
Cabasa can also be played while being<br />
held in mount. Fits on 1/2”<br />
to 1-1/2” dia. tubes.<br />
1 pk. 25.95<br />
SC-268R - Bass Drum Cowbell<br />
Mount - Mounts on bass <strong>drum</strong><br />
counter hoop. 5/16” (9.5mm)<br />
post with “U” clamp <strong>and</strong> wing<br />
screw.<br />
1 pk. 12.95<br />
H<strong>and</strong> Drum Parts<br />
& Accessories<br />
TP-TRC<br />
TP-HAND<br />
HI-USE HAND DRUM PARTS<br />
TP-HAND - Conga H<strong>and</strong>le In Chrome<br />
with mounting hardware.<br />
1 pk. 14.50<br />
TP-TRC - Conga Tension Rod<br />
with nut <strong>and</strong> washer.<br />
1 pk. 5.00<br />
TP-SM - Conga St<strong>and</strong> Mount<br />
with mounting hardware.<br />
2 pk. 13.95<br />
TP-TRB - Bongo Tension Rod<br />
with nut <strong>and</strong> washer.<br />
1 pk. 5.99<br />
TP-RT - Conga/Bongo Tension Rod<br />
Rubber Tip.<br />
6 pk. 3.95<br />
TP-TW<br />
TP-NB (TP-NC)<br />
TP-SM<br />
TP-RT<br />
TP-TRB<br />
TP-NC - Conga Tension Rod Nut<br />
with washer.<br />
6 pk. 5.50<br />
TP-NB - Bongo Tension Rod Nut<br />
with washer.<br />
4 pk. 4.50<br />
TP-TW - Tuning Wrench<br />
with Lug Grease In Pouch.<br />
1 pk. 6.50<br />
Note: TP st<strong>and</strong>s for Toca Parts. These<br />
generic <strong>parts</strong> by Toca will fit most major<br />
manufacturers’ Congas, Bongos <strong>and</strong><br />
other h<strong>and</strong> <strong>drum</strong>s.<br />
17
18<br />
<strong>Gibraltar</strong> Power Rack Parts & Accessories<br />
SC-GPRTC<br />
SC-GPRAC<br />
SC-GPREX<br />
SC-GPRRA<br />
POWER RACK SERIES<br />
SC-GPRTC - T-Clamp - Connects<br />
vertical tubing at a 90˚ angle.<br />
1 pk. 29.95<br />
SC-GPRAC - Rack Angle Clamp -<br />
Connects rack tube to an angled<br />
hinge. High-impact plastic.<br />
1 pk. 18.95<br />
SC-GPREX - Power Rack Extension<br />
Clamp - Connects two 1-1/2” dia. rack<br />
tubes end to end.<br />
1 pk. 21.95<br />
SC-GPRRA - Right Angle Clamp -<br />
Fixed 90˚ right angle clamp with<br />
hinged sides.<br />
1 pk. 30.95<br />
SC-GPRMC - Power Rack Multi-<br />
Clamp - Universal clamp mounts<br />
to rack. Holds 5/8” to 1-1/4” dia.<br />
accessory arms.<br />
1 pk. 30.95<br />
SC-GPRMC<br />
SC-GPRTL<br />
SC-GPRARA<br />
SC-GPRTL - T-Leg Clamp - Specially<br />
modified SC-GPRTC designed for use<br />
with T-leg assemblies.<br />
1 pk. 29.95<br />
SC-GPRARA - Adjustable Right<br />
Angle - This all-new clamp allows<br />
for many setup capabilities. Use for<br />
unique setups or for a quick teardown<br />
<strong>and</strong> fold up of important rack sections<br />
1 pk. 36.95<br />
SC-GPRML - Power Rack Memory<br />
Lock - 1-1/2” dia. ensures same<br />
clamp position on rack. All metal<br />
construction.<br />
2 pk. 12.95<br />
SC-GPREC - Power Rack Electronic<br />
Clamps - Flat arm assemblies with<br />
1-1/2” dia. rack clamps.<br />
2 pk. 64.95<br />
SC-GPRML<br />
SC-GPREC<br />
RACK TUBES<br />
RACK TUBES<br />
SC-GPR40C<br />
SC-GPR43.5<br />
1-1/2” dia. chrome steel tubes with<br />
plastic end caps.<br />
SC-GPR20 - 20” Tube. 1 pk. 19.95<br />
SC-GPR30 - 30” Tube. 1 pk. 21.95<br />
SC-GPR36 - 36” Tube. 1 pk. 24.95<br />
SC-GPR43.5 - 43.5” Tube. 1 pk. 26.95<br />
SC-GPR59 - 59” Tube. 1 pk. 45.95<br />
SC-GPR68 - 68” Tube. 1 pk. 63.95<br />
SC-GPR24C - 24” Curved Tube.<br />
1 pk. 29.95<br />
SC-GPR40C - 40” Curved Tube.<br />
1 pk. 44.95<br />
SC-GPR46C - 46” Curved Tube.<br />
1 pk. 52.95<br />
SC-RBA<br />
We’ve redesigned the SC-RBA to<br />
accept 1/2”, 3/4” or 7/8” dia. tubes.<br />
This allows the mounting of almost<br />
all manufacturers’ cymbal boom arms<br />
<strong>and</strong> other mounting devices. Fits<br />
over any 1-1/2” dia. rack tube.<br />
SC-RBA - Cymbal Boom<br />
Attachment - Fits over any 1-1/2”<br />
dia. rack tube <strong>and</strong> allows mounting<br />
of most popular cymbal boom arms.<br />
1 pk. 26.95
<strong>Gibraltar</strong> Road Series Parts & Accessories<br />
RACK FEET<br />
SC-RC<br />
SC-RF/R<br />
SC-RF<br />
SC-GRSTLA<br />
RACK FEET<br />
SC-RC - Rack Caster - Converts<br />
T-leg assembly into moveable system.<br />
1 pk. 29.95<br />
SC-RF - T-Leg rack rubber feet.<br />
2 pk. 10.95<br />
SC-RF/R - Round foot for GPR Series<br />
Racks. 2 pk. 8.95<br />
SC-GRSMTLA<br />
SC-GRSSMC<br />
SC-GRSMC<br />
SC-GRSTL<br />
ROAD SERIES<br />
SC-GRSSMC - Super Multi-Clamp -<br />
Has a larger multi-clamp section<br />
with more gripping surface than the<br />
SC-GRSMC or similar multi-clamp.<br />
For mounting heavy items.1 pk. 41.95<br />
SC-GRSMC - Multi-Clamp - For<br />
mounting toms, cowbells, cymbals,<br />
etc., to a st<strong>and</strong>ard 1-1/2” dia. rack<br />
tube. 1 pk. 37.95<br />
SC-GRSTL - Road Series T-Leg<br />
Clamp - The Road Series T-leg clamp<br />
is designed for maximum support <strong>and</strong><br />
stability of 90˚ T-leg assemblies.<br />
1 pk. 35.95<br />
SC-GRSAAC - Adjustable Angle<br />
Clamp - Secures two tubes <strong>and</strong> allows<br />
for angle adjustment.<br />
1 pk. 50.95<br />
SC-GRSAAC<br />
SC-GRSSRA<br />
SC-GRSHML<br />
SC-GRSQS - Road Series Quick-Set<br />
Clamp - Allows for two position<br />
(locking) angles which helps to<br />
quicken setup <strong>and</strong> teardown of rack<br />
system. Same clamp used on the<br />
GRS-300QS <strong>Gibraltar</strong> rack system.<br />
Primarily designed for use on<br />
horizontal bar(s) <strong>and</strong> vertical leg bars.<br />
1 pk. 59.95<br />
SC-GRSSRA - Stackable Right<br />
Angle Clamp - Allows two tubes to<br />
meet at the same horizontal angle<br />
<strong>and</strong> pivot up to 90˚ on a vertical leg.<br />
1 pk. 40.95<br />
SC-GRSHML - Memory Lock<br />
(w/hinge) - Can be added to the rack<br />
without sliding other components off.<br />
1 pk. 16.95<br />
SC-GRSRA - Right Angle Clamp -<br />
Fixed 90˚ with hinged sides.<br />
1 pk. 39.95<br />
SC-GRSRA<br />
SC-GRSAR<br />
SC-GRSQS<br />
SC-GRSAR - Adjustable Right Angle<br />
Clamp - Similar in design to the<br />
SC-GRSRA right angle clamp. The<br />
adjustable right angle clamp allows<br />
multiple angle adjustments via a<br />
geared <strong>drum</strong> key rod/bolt assembly.<br />
1 pk. 48.95<br />
SC-GRSTLA - Road Series T-Leg<br />
Assembly - Rack T-leg assembly<br />
with Road Series T-clamp attaches<br />
to vertical tube (20” long). 1 pk. 46.95<br />
SC-GRSMTLA - Road Series Mini<br />
T-Leg Assembly - Mini version of the<br />
SC-GRSTLA. Excellent for tight <strong>drum</strong><br />
setups (12” long). 1 pk. 45.95<br />
19
THESE ARE A FEW OF THE WORLD RENOWNED DRUMMERS AND<br />
PERCUSSIONISTS USING AND ENDORSING GIBRALTAR SERVICE<br />
RICKY LAWSON TOMMY LEE SCOTT PHILLIPS<br />
CARL PALMER MARK TROJANOWSKI<br />
NIR Z<br />
ROBERT RODRIGUEZ<br />
KEVIN RICARD<br />
WILLIE GREEN<br />
DON ALIAS<br />
JOE MORRIS<br />
WALFREDO REYES JR.<br />
JUAN ESCOVEDO<br />
JOHN MICELI RICK STEEL<br />
DAVID ROMERO STEVEN WOLF JOE STRONSICK MICHAEL WHITE DANNY REYES<br />
KCP-603 Printed in U.S.A. 01/01 45M Visit <strong>Gibraltar</strong> On-Line at www.KamanMusic.com Kaman Music Corp., P.O. Box 507, Bloomfield, CT 06002