SI75 - HAAN Power & Finesse User Manual
SI75 - HAAN Power & Finesse User Manual
SI75 - HAAN Power & Finesse User Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PUSH<br />
Using the Carpet Glide - FOR FRESH STAINS<br />
1<br />
2<br />
3<br />
“Hands Free”<br />
Removal Tab<br />
Place unit on stain. Let stand for<br />
a few seconds. Allow steam to<br />
saturate stain.<br />
4<br />
Slowly move unit back and forth<br />
over stain.<br />
5<br />
Remove carpet glide from<br />
unit with hands free tab.<br />
6<br />
Gently place unit on Ultra-microfiber<br />
pad.<br />
Use the pad to rub the area<br />
“blotting” out the stain.<br />
Turn unit OFF. When cooled,<br />
remove Ultra-microfiber pad.<br />
Using the Handheld Steamer - Operating Instructions<br />
Steam Level Button<br />
The Steam Level Button is located on the handheld unit above the Steam <strong>Power</strong> Switch. When<br />
cleaning floors the steam level button will automatically be set to release an optimal amount of<br />
steam that will leave floors clean and dry. When the handheld unit is disengaged from the floor<br />
unit the Steam Level Button will automatically switch to a higher steam output setting that is the<br />
ideal power for handheld use.<br />
1<br />
2<br />
3<br />
Before detaching Handheld<br />
Sanitizer, make sure the unit is<br />
turned OFF.<br />
10<br />
Press Handheld release<br />
buttons inward to release<br />
Handheld unit.<br />
Remove Handheld unit from<br />
floor unit. DO NOT pull power<br />
cord when removing
Change language