gs30 - HAAN Professional Garment Steamer User Manual

Important Safety Information (cont)
IMPORTANT
!
Warning
DO NOT modify the plug.
Improper connection of
the iequipment-grounding
conductor can result in a
risk of electrical shock.
!
CAUTION
Do not cut or attempt to
extend the steaming hose.
i
Do not change the plug in
any way.
Grounding Instructions:
The HAAN® GS-30 must be connected to a grounded (3-prong)
wiring system. Grounding provides a safe path of least
resistance for electrical current, in the event the unit should
malfunction or break down, thereby reducing the risk of
electrical shock. The cord for this product has an equipmentgrounding
conductor and a grounding plug. Do not plug it into
an outlet that is not properly installed and grounded in
accordance with all local codes and ordinances.
Grounded
Pin
Grounded
Outlet
Check with a qualified electrician or service person if you
aren’t sure if the outlet is properly grounded. If it will not
fit the outlet, have a proper outlet installed by a qualified
electrician. This appliance is designed for use on a nominal
120-volt circuit and has a grounding attachment plug as illustrated
above. Make certain that the appliance is connected
to an outlet having the same configuration as the plug. No
plug adapter should be used with this appliance.
If an extension cord is absolutely necessary, the electrical
rating should be at least as great as the electrical rating of
the appliance. Cords rated for less currency may overheat.
Care should be taken to arrange the cord so that it cannot
be pulled or tripped over.
pg 4 877-HAAN DIRECT / 877-422-6347 www.HAANUSA.com