USB HEX-CAN VAG-Com 704.1 Compatible Interface for VW AUDI ...

Product: USB HEX-CAN VAG-Com 704.1 Compatible Interface
for VW AUDI SEAT SKODA
Product
Description:
This interface is designed for VAG vehicles such as VW, Audi, Seat,
Skoda with a 16-pin OBDII socket that using ISO9141-2 or
ISO14230-4 (KWP2000) or the latest CAN (Controlled Area
Network) Protocols, and when paired with the right software, can turn
your laptop to a powerful portable vehicle diagnostic device.
Features: � 150 cm length USB to OBDII cable with built-in HEX CAN
Interface & Isolator (To prevent damage to your cars on-board
computer “ECU” and your computer.) allows easy connection of
the Interface to most modern laptops thru USB port!
� Compatible with the latest cars which require a direct CAN
connection for diagnostics including all Golf-5 platform cars and
latest Audi A3, A6 and A8.
� Protocol timing indistinguishable from a real VAG/VAS tool.
Works reliably even with "difficult" control modules such as the
1991-1994 1Z Audi TDIs and the 1993-1994 Audi 2.6L with
Hella ECU.
� Built-In VAG-Saver functionality -- instantly alerts the user if
either the K/K1 line or the L/K2 line is shorted to Ground or
battery.
� Full support for dual-K lines found in "new" (B6/8E chassis Audi
A4 and 2002+ Audi A6 -- no VAS-6017 required -- no manual
switches!
� Fully backwards compatible with older cars using a single K-line
or K plus L.
� Bi-Color (red/green) status/activity LED indicator.
� Compatible with VAG-COM 704.1 software. Please CONTACT
US for the link to download the free shareware and experience the
function of this shareware.
� Runs on Windows 98, ME, 2000, NT and XP.
Compatible
Vehicles:
(Note: some older models may need an adapter to connect interface to
the DLC which is not included.)
� VW: All models (1992 – 2007);

Operating
Instruction:
Package
Includes:
Remarks:
� Audi: All models (1992 – 2007);
� Seat: All models (1993 – 2007);
� Skoda: All models (1996 – 2007);
� Ford: Galaxy (1996 – 2007);
� Bentley: Continental (2003 – 2007)
1. Install the relevant software and USB driver to your PC/Laptop.
2. Connect the interface to your PC/Laptop’s USB port.
3. Plug the Interface into the vehicle’s 16-pin OBDII socket.
4. Turn ignition key to enable the on board electronics but no need to
start engine.
5. Start the Software, click “OPTIONS” and select com-port to test
the Interface.
6. Click “SAVE”when test is OK.
7. You can now start diagnosis.
� 150 cm length USB to OBDII cable with built-in HEX CAN
Interface & Isolator
� Free Shareware CD