7 and 8 strand ropes : applications in ropeways - OITAF

More documents

Recommendations

Info

Tail wrapping material To maintain the requested stability of the splice, the tails must be wrapped in order to be “forced” inside the outer strands in place of the fiber core. The material to be used for the tail wrapping must be wound in the exact quantity to ensure the longest working time and to keep the geometrical dimensions of wire rope constant. For this purpose the most modern method of wrapping uses reinforced rubber hose cut longitudinally and wound over the tail. This choice of material allows to find a wide variety of dimensions and types on the market, to operate with any kind of rope and size. The scheme represents the longitudinal and the cross sections of the splice area of a 7 strand rope.
Tail wrapping material Splice longitudinal section Fibre core Tail Filler Tuck Tuck support Tuck Outer strands Fibre core Tail Outer strand
Page 1 and 2: 7 and 8 strand ropes : applications
Page 3 and 4: Hauling rope interfaces The load is
Page 5 and 6: Hauling rope interfaces The ropes r
Page 7 and 8: Hauling rope interfaces The smaller
Page 9 and 10: Hauling rope design criteria Charac
Page 11 and 12: Fibre core dimensioning The core is
Page 13 and 14: Step 3 Fibre core dimensioning To d
Page 15 and 16: Rope dynamic prestretching The scop
Page 17: Rope prestretching Wire rope stretc
Page 21 and 22: Tail wrapping material The final re
Page 23 and 24: Experimental results ROLLER' VIBRAT

7 and 8 strand ropes : applications in ropeways - OITAF

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?