CP031-30A - Teledyne LeCroy

CP150 – 150 A, 10 MHz Current Probe
CP500 – 500 A, 2 MHz Current Probe
CP150 Features
• 150 Arms continuous
current
• 500 A peak
• 10 MHz bandwidth
Current
(A rms)
160
140
120
100
80
60
40
20
0
Electrical Characteristics
Max. Continuous 150 A
Input Current
Bandwidth
10 MHz
Max. Peak Current 500 A < 30 µs
at Pulse Width
Rise time (typical) < 35 ns
Minimum Sensitivity 200 mA/div
Max. In-Phase Current 500 A
Low Frequency Accuracy 1%
AC Noise
25 mA
Coupling
AC, DC, GND
General Characteristics
Cable Length
2 m
Weight (probe only) 500 g
Max. Conductor 20 mm
Size (diameter) ProBus, 1 MΩ only †
Interface
Usage Environment Indoors
Operating Temperature 0 °C to 40 °C
Max. Relative Humidity 80%
Max. Altitude 2000 m
Maximum Insulated 600 V CAT II,
Wire Voltage
300 V CAT III
† Requires AP-1M for use with 50 Ω input
only oscilloscopes.
Insertion
Impedance
Frequency (Hz)
Maximum Input Current vs. Frequency
1
0.1
0.01
0.001
Frequency (Hz)
Insertion Impedance vs. Frequency
(typical)
CP500 Features
• 500 Arms
continuous current
• 700 A peak
• 2 MHz bandwidth
Current
(A rms)
550
500
450
400
350
300
250
200
150
100
50
0
10 100 1 k 10 k 100 k 1 M 10 M
Frequency (Hz)
Electrical Characteristics
Max. Continuous 500 A
Input Current
Bandwidth
2 MHz
Max. Peak Current 700 A
at Pulse Width
Rise time (typical) < 175 ns
Minimum Sensitivity 200 mA/div
Max. In-Phase Current 1150 A
Low Frequency Accuracy 1%
AC Noise
25 mA
Coupling
AC, DC, GND
General Characteristics
Cable Length
6 m
Weight (probe only) 630 g
Max. Conductor 20 mm
Size (diameter) ProBus, 1 MΩ only †
Interface
Usage Environment Indoors
Operating Temperature 0 °C to 40 °C
Max. Relative Humidity 80%
Max. Altitude 2000 m
Maximum Insulated 600 V CAT II,
Wire Voltage
300 V CAT III
† Requires AP-1M for use with 50 Ω input
only oscilloscopes.
Insertion
Impedance
Maximum Input Current vs. Frequency
0.100
0.010
0.001
Frequency (Hz)
Insertion Impedance vs. Frequency
(typical)
6