dyna® windshields - Shaw Harley-Davidson

158 DYNA ®
Suspension
A
NeW
b
A. pRofile ® loW fRoNt suspeNsioN* – fxDf*
Designed by Harley-Davidson ® to lower the front fork approximately
1" while preserving ride quality. Springs are wound to
allow a compliant, yet controlled ride. Kit includes two fork
springs, two damper tubes, and two fork tube plug oil seals.
54676-09 $99.95
Fits ’08-later FXDF models. Stock on FXDFSE/2 models.
b. pRofile ® loW fRoNt suspeNsioN* – fxDWG*
Designed by Harley-Davidson to lower the front fork approximately
1" while preserving ride quality. Springs are progressively
wound for a compliant, yet controlled ride. Must
only be installed on vehicles equipped with low-profile rear
suspension.
54621-05 $99.95
Fits ’00-later FXST, FXSTB and FXSTC models equipped with
Profile Low Rear Suspension P/N 54648-00A, 54665-03,
54651-05A, 54652-05 or Rear Lowering Kit P/N 54001-04A.
Also fits ’00-’05 FXDWG models equipped with Low Rear
Shock Kit P/N 54594-03 or Premium Billet Profile Low Rear
Suspension P/N 54592-03.
c. pRofile loW ReAR shock kit*
Plant your feet firmly on the ground. This reduced length
version of the Original Equipment rear suspension lowers
the seat height by approximately 1". Shocks feature chromeplated
springs and body caps, and suspension preload is
adjustable for rider and passenger load.
54625-06 $234.95
Fits ’06-’09 FXD, FXDC and FXDWG models. (Lowers
’06-’09 FXDL, ’08-’09 FXDF and FXDB models 1/4".)
Does not lower ’10 Dyna models.
54594-03 $234.95
Fits ’93-’05 FXD, FXDL, FXDC and FXDWG models.
Does not lower ’01-’05 FXDL models.
D. pRemium pRofile loW ReAR suspeNsioN kit*
Introduced on the ’08 FXDF model, these custom rear shocks
lower your bike while they raise the level of style. These lowprofile
shocks lower the seat height by approximately 1". The
rear shock and spring is completely covered with mirrorpolished
and chrome-plated sleeves for a sleek, beefy look.
54619-08 $399.95
Fits ’07-later FXD, FXDC and FXDWG models. Stock on
’08-later FXDF. Fits but does not lower ’07-later FXDL, FXDB
and ’10 FXD, FXDC and FXDWG models. ’07 Dyna ® models
require separate purchase of Chrome Belt Guard Kit
P/N 60633-08. Does not fit with Detachable Saddlebags
P/N 90181-08.
e. custom foRk bRAce
This chrome-plated fork brace adds style to the front end.
46097-98 $134.95
Fits ’93-’05 FXDWG and ’84-later FX Softail models
(except Springer ® , FXCW/C and FXSTD). (Will not fit with
Chrome Lower Fork Sliders.)
f. scReAmiN’ eAGle ® chRome foRk bRAce
These Chrome Fork Braces are machined from billet aluminum,
then polished and chrome-plated to complement the
curve of the front fender. The machined Screamin’ Eagle logo
finishes the look with crisp detail. Easy-to-install, these braces
offer increased torsional rigidity. Does not fit with Fluted Fork
Slider Dust Covers.
46595-06A $199.95
Fits ’06-later Dyna models (except FXDWG, FXDF, FXDFSE/2
and FXDSE/2), and ’02-later VRSCA, VRSCB, VRSCD and
VRSCX models.
46192-99A $184.95
Fits ’87-later XL (except XL1200N), ’91-’05 Dyna (except
FXDWG) and FXR models (except FXRT) with 39mm front
forks. Will not fit with Chrome Fork Sliders.
c
e
A. pRofile loW fRoNt suspeNsioN –
fxDf moDels
c. pRofile loW ReAR shock kit
D
f
b. pRofile loW fRoNt suspeNsioN –
fxDWG moDels
D. pRemium pRofile loW
ReAR suspeNsioN kit
*WARNiNG: Installation of any accessory suspension
components may affect cornering clearance and jiffy
stand operation. This could distract the rider, causing
loss of control and death or serious injury.
*WARNiNG: The Profile ® Low Front Spring Kit cannot be
used independently and must be used with the appropriate
Profile Rear Shock Lowering Kit. Installation of any
accessory suspension components may affect cornering
clearance and jiffy stand operation. This could distract
the rider, causing loss of control and death or serious
injury.
e. custom foRk bRAce
f. scReAmiN’ eAGle chRome foRk bRAce