dyna® windshields - Shaw Harley-Davidson

176 DYNA ®
Hand Controls
A
b
A. billet bRAke liNe clip
It’s the details that count. Replace the Original Equipment
black brake line clamp with this beautifully chrome-plated
billet aluminum clip. Sized for Original Equipment or braided
brake lines, these “ball-milled” clips mount in the factory position
for easy installation. Kit includes chrome-plated mounting
hardware.
91336-03 $21.95
Fits ’00-’07 FXST, FXSTB, FXSTC, FXSTD, and FXDWG
models equipped with Original Equipment brake lines.
91364-03 $21.95
Fits ’00-later FXST, FXSTB, FXSTC, FXSTD, and FXDWG
models equipped with Harley-Davidson ® Braided Brake
Lines. Also fits ’08-later FXST, FXSTB, FXSTC and FXDWG
with Original Equipment brake lines.
91369-03 $21.95
Fits ’00-later XL and Dyna ® (except FXDWG) models
equipped with Harley-Davidson Braided Brake Lines.
Also fits ’08-later Dyna models (except FXDWG) with
Original Equipment brake lines.
b. billet clutch cAble ADjusteR Dust coveR
Replace the black rubber clutch cable boot with brilliant
chrome. Machined from billet aluminum, this two-piece
“ball-milled” dust cover offers a striking contrast to Original
Equipment black cables, and a natural finishing touch when
installing a braided clutch cable. Easy-to-install with included
hardware.
64108-03 $49.95
Fits ’00-later XL, Dyna ® and Softail ® models (except
FLSTSE). ’00-’03 XL models require installation of Clutch
Cable Clamp P/N 91147-02, and ’04-later XL models
require installation of Clutch Cable Clamp P/N 91249-04
(sold separately).
c
A. billet bRAke liNe clip
D
b. billet clutch cAble
ADjusteR Dust coveR
c. chRome billet clutch cAble clAmp
The perfect addition to braided or stock black clutch cables.
This Clutch Cable Clamp is machined from aluminum billet,
and polished and plated for a lasting shine. The clamp is
designed to grip the cable and the frame down tube, adding a
custom look to the front of your cycle.
38804-07 $39.95
Fits models with 1-1/2" diameter front frame down tube.
Fits ’06-later Dyna ® models. Stock on FXDSE and
FXDFSE/2 models.
91147-02 $39.95
Fits models with 1-1/4" diameter front frame down tube.
(Does not fit Touring, ’04-later XL, ’08-later XR and
’06-later Dyna models.)
D. chRome thRottle cAble clip
Tie up the loose ends to complete your custom ride. When
matched to Original Equipment black cables or available
braided cables, these chrome-plated clips link the throttle/
idle cables with brilliant chrome.
91274-04 $29.95
Fits ’84-later models (except ’08-later Touring).
c. chRome billet clutch cAble clAmp
D. chRome thRottle cAble clip
e. polYuRethANe hANDlebAR RiseR bushiNGs
These Handlebar Riser Bushings replace the Original
Equipment stacked rubber and zinc washer combination with
a molded one-piece polyurethane bushing and chrome cover.
The long-lasting bushing can reduce handlebar vibration, and
the chrome cover adds a bright finishing touch.
56165-03 $39.95
Fits ’97-’03 XL, ’86-later Dyna ® (except FXDB) and Softail ®
(except Springer ® and FXSTD) models. ’86-’93 FL Softail
models require use of ’94-later Riser Bolts. Will not fit with
Chrome Riser Cup Washer Kit P/N 56486-01.
f. ReDuceD effoRt clutch kit
Kit includes a new clutch spring and inner/outer ramps that
significantly reduce clutch lever effort. Original Equipment on
’06-later Twin Cam-equipped models.
36808-05 $44.95
Fits ’99-’05 Twin Cam-equipped models. Stock on ’06-later
Twin Cam-equipped models. This kit is not compatible with
Screamin’ Eagle ® Performance Parts.
e
f
Notice: The prices appearing in this catalog are the manufacturer’s
suggested retail prices. Actual retail prices may vary.
e. polYuRethANe hANDlebAR
RiseR bushiNGs
f. ReDuceD effoRt clutch kit