GS 33Q05L01-31E

General
Specifications
LPC2800
UOI Integration Package for
Power Generation Applications
GS 33Q05L01-31E
• GENERAL
This GS (General Specifications) describes the specifications of the UOI Integration Package, which provides an
integrated operation between General Electric Company SPEEDTRONIC Mark VI / Mark V Turbine Control System
and YOKOGAWA CENTUM CS 3000 System (hereafter referred to as CS 3000) - a control system for HRSG (Heat
Recovery Steam Generator) and BOP (Balance of Plant) auxiliaries - using GE Fanuc CIMPLICITY HMI System
as an operator interface used in the common platform for control applications at combined cycle power generation
plants. The common platform concept, called Unified Operator Interface (UOI), provides uniformity of operation
across the HRSG/BOP and Turbine Controls. This is achieved through direct access to Turbine Displays and Data/
Messages through the unique UOI concept.
• STANDARD SPECIFICATIONS
• Feature
The UOI system employs a Server/Client (Viewer) architecture, which is the core technology of the UOI system, and
provides functions such as data access, alarm and message management and Tag/Object conversion by using GE
Fanuc CIMPLICITY HMI System. General Electric Company PEECC Server/Client (Viewer) also employs the same
CIMPLICITY HMI system and UOI Viewers can access both UOI Server and PEECC Server as a common HMI platform.
By installing CS 3000 Control Bus Interface Card and UOI Integration Package in the UOI Server, it can access to
CS 3000 FCS as a primary HMI interface of HRSG/BOP operation. It also supports a dual redundant configuration to
provide a highly reliable system.
Since the UOI Server is configured independently from the PEECC Server, the operation can be integrated on the UOI
Viewers via Plant Data Highway without affecting the Turbine Control system.
Unified Operator Interface (UOI)
UOI
UOI
Configuration PC
Unit Data Highway for Mark VI
Stage Link for Mark V
SPEEDTRONIC
Mark VI or V
(for Gas Turbines)
UOI Viewer(s) (GE Fanuc CIMPLICITY HMI Viewer)
Data/Message from Data/Message from
Turbine Project UOI BOP/HRSG Project UOI UOI
PEECC (*1)
Server(s)
(CIMPLICITY HMI
Server)
CS 3000
UOI Integration
Package
SPEEDTRONIC
Mark VI or V
(for Steam Turbine)
UOI Server(s)
(CIMPLICITY HMI
Server)
Control Bus
(Vnet, Vnet/IP)
CENTUM CS 3000
FCS(s)
(for HRSG/BOP)
Plant Data Highway
(Ethernet)
CENTUM CS 3000/
ProSafe-RS
Builder PC
ProSafe-RS SCS(s)
(for Protection)
Turbine Controls by General Electric Company
HRSG/BOP Controls by YOKOGAWA
*1: PEECC; Packaged Electrical and Electronic Control Compartment
Figure: UOI’s Basic System Configuration
F01E.ai
Yokogawa Electric Corporation
2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 Japan
Tel.: 81-422-52-5637 Fax.: 81-422-52-4499
GS 33Q05L01-31E
©Copyright Jul. 1, 2001
8th Edition Sep. 1, 2007

• CS 3000 FCS
Field Control Stations (FCS) are connected to the UOI
Server PCs and the CS 3000 Builder PC. CS 3000
FCS(s) provide control functions for HRSG/BOP operation.
• UOI Viewer PC Functions
UOI Viewer PCs are connected to the UOI Server
PC(s) via Plant Data Highway (Ethernet) and provides
operation and monitoring functions for CS 3000’s FCS
and SPEEDTRONIC Mark VI / Mark V.
CIMPLICITY HMI System is configured of UOI Viewers
(Client) as its platform.
UOI Viewer also provides the following functions and
components and can create the monitoring and operation
functions, such as Graphics, Trend Chart, Alarm
Viewer, Faceplate, Data Entry Dialog Box, by utilizing
the following functions.
- HMI client connection and login function
- CIMPLICITY data server client-side function
- Graphic viewer function
- Interactive ActiveX alarm viewing object
- Interactive ActiveX object for viewing trend data
- ActiveX object for plotting multiple X-Y data
- Visual Basic for applications scripting language
See GE Fanuc CIMPLICITY HMI’s manual for details.
• UOI Server PC Functions
UOI Server PC(s) are connected to the CS 3000
FCS(s) via Control Bus for device communication and
provides the following data access services:
- HMI client connection management
- Data access security functions
- Data routing and change management
- Alarm/event notification and routing
- Alarm state management (Acknowledgment/Reset/
Deletion)
- Trend data buffering
In addition to the above, the following functions are
provided as the UOI system for CS 3000 FCS’ data
integration.
- FCS tag data to CIMPLICITY point data mapping
- FCS process data communications
- FCS message management
- FCS alarm/event to CIMPLICITY alarm/event mapping
CIMPLICTY HMI System is also configured of UOI
Server(s) as its platform.
See GE Fanuc CIMPLICTY HMI’s manual for details.
• Integrated Data and Messages
UOI System provides a Server/Client architecture using
GE Fanuc CIMPLICITY HMI System:
The data and messages from the SPEEDTRONIC
Mark VI / Mark V and CS 3000 FCS can be displayed
on UOI Viewers. Various operations, such as displaying
data on graphic screen, displaying messages on
alarm window, assigning data on trend chart, can be
integrated on the UOI Viewers.
• CS 3000 FCS Builder Functions
The CS 3000 FCS Builder functions provide configuration
and maintenance of FCS using the CS 3000
Standard Builder Function software package installed
in the CS 3000 Builder PC.
For the tuning of control functions, it requires CS 3000
Operation & Monitoring Standard Function software
package in the CS 3000 Builder PC.
The configuration procedure and control functions are
the same as CS 3000 specified under the Software
Requirements in this GS.
• Station Configuration on CS 3000
In the station configuration on CS 3000, the UOI Server
PC is assigned as a UHMIS station and the CS 3000
Builder PC is assigned as an HIS station.
2
• Tag/Object Conversion Function
This function is one of the utilities included in this package.
It converts the Tag List generated by CS 3000
Builder to the configuration used for CIMPLICITY Objects
(Tag Common Attributes) and CIMPLICITY Points
(Data Item Attributes). This tool runs on the UOI Server
PC. When the Tag List is changed in the CS 3000
Builder PC, it must be equalized to the UOI Server’s
Project Database using this conversion tool.
• ProSafe-RS Integration
UOI system is capable to monitor data on ProSafe-
RS system. It handles data on Safety Control Station
(SCS) as equivalent as data on FCS throughout CS
3000 integration capability with ProSafe-RS system.
UOI Tag/Object Conversion Function generates CIM-
PLICITY Objects and Points from SCS Tag List.
• SYSTEM SPECIFICATIONS
The application capacity and the number of configuring
systems for CS 3000, including CIMPLICITY HMI, are
as follows.
• Application Capacity
Number of CS 3000 Tags maintained in CIMPLICITY
HMI Database: Max. 10,000 tags/UOI
server
CS 3000 FCS: Same as CS 3000 FCS’ standard
specifications
• Maximum System Size
Number of UOI Viewers: Max. 8/UOI server
Number of CS 3000 Builder PC : Max.1/UOI system
All Rights Reserved. Copyright © 2001, Yokogawa Electric Corporation
GS 33Q05L01-31E Sep. 1, 2007-00

• OPERATING ENVIRONMENT
• Hardware Requirements
UOI Server PC
PC type: IBM PC/AT compatible
CPU: Pentium III 600 MHz or faster
Main memory: 512 MB or larger
Hard disk: 4 GB or bigger (with at least 2.3 GB of
free capacity)
Serial port: One or more RS-232C ports
Parallel port: One or more ports
Network interface:
One Ethernet Card for UOI Viewer PC
One VI701 Control Bus Interface Card for
CS 3000 Vnet/IP System or
One VF701 Control Bus Interface Card for
CS 3000 Vnet System
UOI Viewer PC
PC type: IBM PC/AT compatible
CPU: Pentium II 300 MHz or faster
Main memory: 256 MB or larger
Hard disk: 2 GB or bigger (with at least 600 MB of
free capacity)
Serial port: One or more RS-232C ports
Parallel port: One or more ports
Network interface: One Ethernet Card for UOI Server
PC
CS 3000 Builder PC
PC type: IBM PC/AT compatible
CPU:
Pentium 300 MHz or faster for Windows 2000
Pentium 800 MHz or faster for Windows XP
Main memory: 96 MB or larger (To use optional
software packages, engineering functions
or general-purpose software, add more
memory)
256 MB or larger for Windows XP
Hard disk: 4 GB or bigger (with at least 500 MB of
free capacity)
CRT display: 1024 x 768 or more, 256 colors (Video
memory: 2MB or more, CRT: multi-scan
17-inch or larger recommended)
Serial port: One or more RS-232C ports
Parallel port: One or more ports
Network interface:
One Ethernet Card for UOI Server PC
One VI701 Control Bus Interface Card for
CS 3000 Vnet/IP System or
One VF701 Control Bus Interface Card for
CS 3000 Vnet System
• Software Requirements
3
UOI Server PC
OS:
Windows 2000 Server Service Pack 4
Windows Server 2003 Service Pack 1
Other Software: GE Fanuc CIMPLICITY HMI Plant
Edition / Server Development System
(Ver.6.1 / Service Pack 5)
Option Software: GE Fanuc CIMPLICITY HMI Plant
Edition / Runtime System
(Ver.6.1 / Service Pack 5)
UOI Viewer PC
OS:
Windows 2000 (Professional or Server)
Service Pack 4
Windows XP Professional
Service Pack 2
Windows Server 2003 Service Pack 1
Other Software: GE Fanuc CIMPLICITY HMI Plant
Edition / Viewer Development System
(Ver.6.1 / Service Pack 5)
Option Software: GE Fanuc CIMPLICITY HMI Plant
Edition / Viewer Runtime System
(Ver.6.1 / Service Pack 5)
CS 3000 Builder PC and Option Software
OS:
Windows 2000 (Professional or Server)
Service Pack 4
Windows XP Professional
Service Pack 2
Windows Server 2003 Service Pack 1
Other Software:
LHS5100 Standard Builder Function
LHS1100 Standard Operation and Monitoring
Function
Option Software:
LHS1150 Server for Remote Operation and Monitoring
Function
LHS4410 Control Drawing Status Display Package
LHS4420 Logic Chart Status Display Package (*1)
LHS5420 Test Function
LHS5425 Expanded Test Functions (*2)
LHS5490 Self-Documentation Package
LHS5495 Electronic Instruction Manual
LPC6910 SOE Server Configurator Package (*3)
LPC6920 SOE Viewer Package (*3)
*1: Supported by R2.05 or later.
*2: Supported by R2.10 or later.
*3: Supported by R3.03 or later.
The packages, which are not listed, please contact
YOKOGAWA’s sales office.
See each software’s GS of CS 3000 for details.
Note: All the General Electric Company’s products
configuring the UOI system belong to General
Electric Company.
All Rights Reserved. Copyright © 2001, Yokogawa Electric Corporation GS 33Q05L01-31E Sep. 1, 2007-00

• MODEL AND SUFFIX CODES
Model
Suffix
Codes
Description
UOI Integration Package for Power
LPC2800 Generation Applications (R2.05)
[Media model: LPCSM80-C11]
-S Basic software license
1 Always 1
1 English-language version
*1: This package contains an instruction manual in
PDF to be read using Acrobat Reader.
• ORDERING INFORMATION
Specify model and suffix codes.
*1: This package runs when CENTUM CS 3000
R3.08.10 or later is used for CS 3000 Builder PC.
*2: To purchase GE Fanuc CIMPLICITY HMI Plant
Edition Server / Viewer Ver. 6.1 software, please
contact GE Fanuc sales office.
*3: Please order the CENTUM CS 3000 system ID license
(Model: LHSDM01-S11) from YOKOGAWA
together with LPC2800.
One CENTUM CS 3000 system ID license is required
for each LPC2800 license for the key code
generation.
4
• TRADEMARKS
- CENTUM is a registered trademark of Yokogawa
Electric Corporation.
- CIMPLICITY and CIMPLICITY HMI Plant Edition are
a registered trademark of GE Fanuc Automation
North America, Inc.
- SPEEDTRONIC is a registered trademark of General
Electric Company, USA.
- ARCNET is a registered trademark of Datapoint Corporation.
- Ethernet is a registered trademark of Xerox Corporation.
- Windows and ActiveX are registered trademarks of
Microsoft Corporation.
- Pentium is a registered trademark of Intel Corporation.
- PC, IBM PC/AT and IBM are registered trademarks of
International Business Machines Corporation.
- FOUNDATION is a trademark of Fieldbus Foundation.
- Acrobat is registered trademarks of Adobe Systems
Incorporated and registered within particular jurisdictions.
- Other product and company names appearing in this
document are trademarks or registered trademarks of
their respective holders.
All specifications are subject to change without written
notice.
All Rights Reserved. Copyright © 2001, Yokogawa Electric Corporation
Subject to change without notice.
GS 33Q05L01-31E Sep. 1, 2007-00