SPESIFIKASI TEKNIKAL – JADUAL PEMATUHAN

LAMPIRAN 2 - JADUAL PEMATUHAN SPESIFIKASI TEKNIKAL
Arahan : Sila nyatakan „Ya‟ atau „Tidak‟ di ruang Kepatuhan berkenaan dengan tawaran yang bakal
diberikan. Nyatakan juga sekiranya pembekal mempunyai spesifikasi lain atau lebih baik daripada
spesifikasi minimum yang diberikan.
FULLY RUGGED HANDHELD
No Perihalan Perincian Kepatuhan
Ya/Tidak
1. Model : Fully Rugged Handheld
Cadangan spesifikasi
pembekal (sila
nyatakan)
2. Operating Genuine Window Mobile® 6.1
System :
3. Mobile
Marvell PXA310 806MHz
Computing
Platform :
4. Display : 3.5” TFT LCD VGA (480 x 640)
Transflective sunlight readable
display
Pressure sensitive touchscreen
5. Storage &
Memory :
In-built 128MB MDDR
In-built 256MB NAND flash and
4GB iNAND
6. Keypad : numeric keypad or PDA keypad
7. Expansion Slot : SDIO/SDHC card slot x 1
(up to 16GB SDHC memory
card)
8. I/O Interface : Serial port (9-pin; D-sub) x 1
USB OTG x 1
(client 2.0 and Host 1.1;5-
pin;type Mini AB)
Microphone x 1
Speaker x 1
DC in Jack x1
9. Communication
Interface :
3.5G WWAN
(HSDPA/WCDMA/EDGE/GPRS/
GSM)
802.11 b/g
Bluetooth (v2.0+EDR class 2)
D-GPS (with internal antenna)
1

10. Software : Microsoft Internet Explorer
Mobile®
Microsoft Office Mobile
Applications
Microsoft Office Mobile®
Microsoft® Windows Media
®Player 10 Mobile
Microsoft ActiveSync 4.5 for
data sync
11. Power : Charging Cradle with AC
adapter (50w, 100-240VAC,
50/60Hz)
Li-Ion smart battery (5600mAh)
(up to 10 hours of battery life)
12. Dimension
(WxDxH) &
Weight :
13. Field Service
Feature :
14. GPS Sensor
Specification :
89 x 30 x 178mm (3.5” x 1.18” x
7”)
500 g (17.64 oz without 3G
module)
GPS: SiRFstar
3 megapixel auto focus camera
e-compass
altimeter
Chipset: SiRFstarIII
Receiver Type: L1 (C/A)
Channels: 20 channel all-inview-tracking
Update Rate: 1 Hz
Horizontal Accuracy:
1. Autonomous: 5 m
2. DGPS: 1-3 m
Cold Start Time: 45 sec average
Warm Start Time: 30 sec
average
Hot Start Time: 1 sec average
Reacquisition: 0.1 sec average
15. Rugged Feature : Fully rugged
MIL-STD-810G certified and
IP67 certified
Tamper-proof plastic case
Vibration and drop resistant
Tumbling resistant (1,000
cycles; 0.5 m)
2

16. Environmental
Specification :
17. Alphanumeric
Data Entry :
Temperature:
- Operating: -30‟C to 60‟C/-
22‟F to 140‟F
- Storage: -40‟C to 70‟C/-
40‟F to 158‟F
Humidity:
- -95% RH, noncondensing
Soft input panel (SIP) on screen
keyboard
Transcriber handwriting
recognition
numeric or PDA keypad
18. Security Feature: WiFi for WPA/WPA2 operation
Authentication:
OPEN,SHARED-KEY,PEAP
(MS-CHAPv2,GTC,MD5)
EAP-TLS, EAP-FAST, EAP-
TTLS (PAP,CHAP,MS-CHAP,
MS-CHAPv2, PAP/Token
Card,EAP with GTC)
Encryption: WEP,AES,TKIP
19. Regulation: CE, FCC, UL, BSMI, NCC
20. Inbox Accessory Microsoft getting started disc
AC adapter and UK/EU/US
plugs
USB cable
Protective film
Hand strap
Quick start guide
Battery
Stylus
21. Warranty 3 years
22. Pamphlet Lampirkan
3

RUGGED PORTABLE THERMAL PRINTER
No Perihalan Perincian Kepatuhan
Ya/Tidak
23. Communication : Bluetooth
– Network environment: Ad hoc
network
environments
24. Model : Rugged Printer
Cadangan spesifikasi
pembekal (sila
nyatakan)
25. Dimension :
(WxDxH)
6.8”h x 6.9”w x 2.7”d
(172.2 x 175.8 x 69.1 mm) or
smaller
26. Weight :
28 oz (0.792 kg) or lighter
(with battery)
27. Display : Weight 37.2 oz (1.05 kg) or lighter
: (with
battery and
paper roll)
28. Print width : 4.10” (104 mm)
29. Media width : 4.41” (112 mm)
30. media capacity : 2.25” (57 mm) maximum roll
diameter (O.D.)
31. Battery : 2 units Lithium-Ion battery, 7.2V,
2200 mAh (for a total of 4400
mAh)
32. DC Inputs : External DC jack;
(12-15V,built-in spike and surge
protection)
33. Endurance: Prints up to approx. 6,900” or
1,150 – 6” receipts
(on single battery charge)
34. Recharging : 4-5 hours from AC adapter
35. Memory : 4MB Flash / 2MB RAM
36. Drop
specification:
37. user
environment
6 ft. (1.8 m)
• Operating temperature:
-4° F to 122° F (-20° C to 50° C)
4

• Storage temperature:
-40° F to 158° F (-40° C to 70°
C)
• Charging temperature:
41° F to 104° F (5° C to 40° C)
• Relative humidity:
10% to 90% non-condensing
• ESD protection:
15 kV Air, 8 kV contact
38. print technology • Printhead:
– Direct thermal
– 203 dots per inch (8
dots per mm)
• Print mechanism speed:
– 2” per second (51 mm
per second)
39. barcodes/fonts/g
raphics
• Standard fonts:
– 5.5CPI, 7.2CPI, 10.2 CPI,
10.7CPI,
18.5CPI 20.4CPI, 22.6CPI &
34.0CPI
• Barcodes:
– Linear: Codabar, Code 39,
Code 93, Code
128, EAN-8, EAN13, Interleaved
2 of
5, MSI/Plessey, UCC/EAN-128,
UPC-A,
UPC-E
– 2D symbologies: PDF417;
AZTEC, QR,
GS1, Datamatrix
• Graphics:
– Supports storage of
graphics/logos in
Flash memory and transient
“print once”
Graphics
40. Warranty 3 years
5

41. Pamphlet Lampirkan
HANDHELD APPLICATION & MIDDLEWARE INTEGRATION WITH BACK OFFICE SYSTEM
No Perihalan Kepatuhan
Ya/Tidak
1. The Handheld application must be able to comply with Majlis
Bandaraya Petaling Jaya Enforcement system handheld
requirements including field names and structure.
2. The Handheld application must be able to direct synchronize its data
with Majlis Bandaraya Petaling Jaya Enforcement Middleware
system.
3. The Handheld application must follow the current Work Flow of the
Majlis Bandaraya Petaling Jaya Enforcement system.
4. The Backend application must be capable of supporting the MBPJ
Enforcement Management System without the need for a
middleware.
5. The handheld application must be able for unattended multiple
download/upload of handheld data to Majlis Bandaraya Petaling Jaya
Enforcement Back Office system, must comply to download/upload
data format of existing systems and able to do download and upload
simultaneously by batch via wireless.
6. Source code own by MBPJ
TRAINING & IMPLEMENTATION
No Perihalan Kepatuhan
Ya/Tidak
1. Training for enforcement officer on
i) Mobile Handheld e-Enforcement System
(5 days for maximum 100 persons)
2. Training for enforcement officer
ii) e-Enforcement Middleware system on
(5 days for maximum 4 persons)
3. Transfer of Technology for ICT Officer ( maximum 4 persons)
4. Stand by 7 days on site for data integrity checking
6

MAINTENANCE SERVICE
No Perihalan Kepatuhan
Ya/Tidak
1. Hardware & Software maintenance cover 36 months with on-site
support
2. Hardware comprehensive maintenance, include all spare parts
replacement against manufacturing defects
3. Free battery replacement for handheld and printer for 3 year
7