special worldwide 2011 - HAZET-Werk

Specialty Tools
Engine
Ingenious Tools
Injector Extractor J
For removing seized or stuck Common Rail injectors without having
to disassemble the cylinder head e.g. on MERCEDES-BENZ CD engines 611,
612, 613, etc.
• Made in Germany
2 External Adapter J
4797-1 Impact Extractor
• The External Adapter must be used when the
Injector Claw cannot be used, either because of
the vehicle type or because of the lack of space.
• With inside thread. In conjunction with Impact
Extractor 4797-1
• Made in Germany
4797-3 EAN-No.4000896121199
M 27 x 1
50 mm
M 16 x 1.5
Note: Always replace the
injector that has been removed
with the External Adapter!
4797-2 Injector Claw
M 16 x 1.5 mm
Injector Adapter ß
• With inside thread for the connection
with Impact Extractor 4797-1
• Outside adapter for the injector removal on
VW / AUDI 1.7SDI, 1.9TDI, 1.9SDI engines
• Made in Germany
M 14 x 1.5
44 mm
M 16 x 1.5
4797/2 EAN-No.4000896121205
Glow Plug Reamer I
• For professional glow plug shaft
cleaning in the cylinder head
• Made in Germany
4798/3 EAN-No.4000896153237
Tester for Cooling System KG
For testing cooling systems
• Made in Germany
Contents:
1 Cooling Pump 4800-1
Up to 2.5 bar with in-line
quick coupling
1 Intermediary Hose
4800-2 Flexible Hose
5 Adapters for Cooling System
4800-4 A, -6, -12, -15, -17
For AUDI A2, A3, A4, A5, A6,
A7, A8, TT, VW Passat, Golf 3, 4, 5,
Lupo (since 1998), Vento
(since 1997), Jetta, EOS,
Bora, T5, CITROËN C2, C3, C4, C5,
C6, C8, Jumper, Jumpy, FIAT Tipo,
Tempra, MERCEDES-BENZ type 202 /
203 (C-Class), 124 / 210 (E-Class),
129 / 220 (S-Class), 251 (R-Class),
164 (M-Class), NISSAN Micra,
OPEL Vectra C, Astra H, Zafira A, Meriva,
Signum, Corsa, PEUGEOT, RENAULT
Safrane, Megane, Laguna, Twingo, Trafic,
Master, SEAT Arosa, Córdoba, Ibiza
(since 1999), Toledo (since 1998), Vario
and León (until 1998), SKODA Octavia
(until 1998), Fabia (since 1998), Roomster
4800/7 EAN-No.4000896132874
ORIGINAL PART:
Joint development with
3
s 10 mm
s 12 mm
– Further adapter see
Illustrated List 2011,
page 212 – or (in German)
www.hazet.de ➞ Online-Katalog ➞
„Zuordnung Kühleradapter 4800“
7
4797-4 EAN-No.4000896159444
Vacuum-Type Cooling System Filler G
Easy operation in conjunction with the single and universal adapters
of the HAZET range of Cooling System Testers 4800 or with
an appropriate rubber cone of the set 4801-2/3
• Vacuum leakage test before refilling the cooling system
• Bubble-free refilling
• Easy application due to quick-release
coupling
• Time-saving, no additional bleeding
necessary
• Application possible on almost
all types of vehicles
4801-1 EAN-No.4000896148806
Cone Set G
Universal set suitable
for radiator / expansion tank
• Application in conjunction with Vacuum-
Type Cooling System Filler HAZET 4801-1
x 34 – 50 mm
• Due to the vacuum generated in the
x 24 – 39 mm
cooling system the rubber cone is stuck firmly in
x 17 – 31 mm
the radiator or expansion tank opening
• Made in Germany
4801-2/3 EAN-No.4000896152407
Flexible Hose Clamps Set
Contents:
l = 150 mm for heating and
fuel hoses up to 15 mm
l = 180 mm for hoses up to 30 mm
l = 253 mm for cool liquid hoses
up to 60 mm
4590/3 EAN-No.4000896058266
3
3
= See application video on
www.hazet.de
The HAZET Online Catalogue – a service for more than 10 years! • www.hazet.de
41