13.11.2012 Views

12 - Pro Equine Products

12 - Pro Equine Products

12 - Pro Equine Products

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

04<br />

BOOT APPLICATION<br />

1. Open the boot and fold back the EverGrip<br />

tabs. This allows you to correctly position<br />

the boot on the horse without interference.<br />

(Note: Each boot is marked with either a<br />

“Left” or a “Right” on the inside of the boot.)<br />

2. Align the boot with the horse’s leg and<br />

position the darts of the boot with the fetlock<br />

area of horse. (Note: The boot will “cup” the<br />

fetlock joint when placed correctly.)<br />

3. Position the second strap of the EverGrip<br />

tab. This allows the boot to be moved up and<br />

down and side to side for a better fit.<br />

4. Position the top strap of the EverGrip tab<br />

snug on the body of the boot. Repeat this<br />

with the third strap. Do not allow the boot to<br />

“gap” around the leg. This “gap” acts as a<br />

collection point for dirt and debris.<br />

5. Bring the suspensor y strap underneath<br />

the horse’s fetlock, around to the front of<br />

the boot and apply the EverGrip tab at a<br />

45 -degree angle to the leg. This creates<br />

the protective sling. (Note: Make sure this<br />

strap is placed completely below the fetlock<br />

joint and pulled tight to create a wrinkle-free<br />

supportive sling.)<br />

6. Readjust all straps so the boot is snug<br />

and contoured to the horse’s cannon bone.<br />

(Note: The third strap may be at a slight<br />

downward angle to ensure a snug, wrinklefree<br />

fit.)<br />

STEP 1 & STEP 2<br />

STEP 3<br />

STEP 4<br />

STEP 5<br />

STEP 6<br />

Left (L)<br />

L<br />

L<br />

L<br />

L<br />

L<br />

CANNON BONE<br />

SESAMOID BONES<br />

SUSPENSORY LIGAMENT<br />

FETLOCK JOINT<br />

Hemmed EverGrip<br />

straps for a clean,<br />

secure application<br />

Patented Sling<br />

Technology uses<br />

the entire boot for<br />

increased support<br />

to tendons and<br />

ligaments<br />

New lycra bound edges<br />

prevent the buildup of<br />

arena dirt and debris<br />

<br />

The New Ultra Sport Boots are<br />

The New Standard of support,<br />

performance, and protection.<br />

<strong>Pro</strong> <strong>Equine</strong>’s Patented Sling<br />

Technology (PST), with a onepiece<br />

design, gives your horse<br />

the most suspensory ligament<br />

and tendon support on the<br />

market. The lightweight<br />

and sleek build lets your<br />

horse perform at the top of<br />

its ability while still protecting<br />

from cross-over concussion and<br />

hyperextension of the tendons<br />

and ligaments.<br />

PST<br />

PATENTED<br />

SLING<br />

TECHNOLOGY<br />

Streamlined fit reduces<br />

excess bulk<br />

Layers laminated<br />

together to create<br />

one body<br />

Formed for a perfect fit to the<br />

fetlock and cannon bone<br />

800.411.1986 PROEQUINEPRODUCTS.COM 05<br />

PEP 6th Edition Catalog.indd 4-5 <strong>12</strong>/23/09 10:25:14 AM<br />

CANNON BONE<br />

FETLOCK JOINT<br />

SUSPENSORY LIGAMENT

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!