T.Book_Finale.pdf

Recommendations

Info

SUPER-ELASTIC 16 MARANGONI INDUSTRIAL & MULTIPURPOSE TYRES Specific versions: Super-Elastic Reference norms SPECIAL - S This version was designed and realised especially for loaders and produced in the 20 and 24 inch sizes. It is constructed using compounding, which is particularly resistant to lacerations. The tyre distinguishes itself for its resistance to wear and tear, jolts, cuts and abrasions; furthermore, for its elevated rigidity which provides stability to the vehicle and therefore, to the load. Used for vehicles which carry loads, usually in environments with extreme conditions such as scrap yards and dumps. NON MARKING - NM This is a yellow coloured tyre, designed not to leave dark marks on the ground surface. It is constructed with a yellow mixture, containing no dark substances, and maintains all of the other physical and mechanical characteristics of the standard black tyre. Under every aspect, the non marking Super-elastic and Cushion tyres’ qualities are the same as those of a standard version. It’s use is desirable in environments where cleanliness is of great importance; for example in the pharmaceutical, food and beverage, and electronic industries, or anywhere light coloured floors must stay clean. HIGH CAPACITY - HL This is a tyre designed with a highly rigid structure in comparison to standard tyres. It is constructed with extremely hard mixtures which are able to maintain an excellent level of all of the other physical and mechanical characteristics. The distinguishing feature of Super-elastic and Cushion tyres is the ability to sustain elevated capacities with minimal deformation under extreme loads. It is widely used in situations where the fundamental importance is maintaining the stability of the vehicle, and therefore, of the load. It is also utilised in other specific cases. It is suggested that a Marangoni technician be contacted for consultation before selecting this version for use. ANTISTATIC - AS This tyre was designed to release the static electricity accumulated by the vehicle into the ground. It is constructed with special additives which perform this action while maintaining an excellent level of all of the other physical and mechanical characteristics. It is typically used in paint and solvent factories, in gas tank deposits, in environments where fine dust particles are easily flammable or in environments where the accumulation of static electricity can cause explosions. In all of these cases, the use of this tyre increases the levels of safety. The AS Super-elastic and Cushion tyres are in conformance with the ISO/DIS 2883 standards. A certificate of conformity shall be provided upon customers’ request. SUPER-ELASTIC TYRES • Produced by a known company whose standards of quality are certified by ISO 9001:2000 • In conformance with E.T.R.T.O and DIN 7852 regarding load, size and speed capacities in conformance with ISO/DIS 2883, if anti-static • Correctly installed on standard rims and hubs whose ideal sizes are prescribed by E.T.R.T.O. • In conformance with UNI ISO 1074 in terms of vehicle stability equipped with Super-elastic tyres
Rims for Super-Elastic Tyres and Industrial Pneumatics Rim Size A D1 D6 α Type Sphere of measure 2.10-4 53,3 ± 1,5 100,8 5 ± 1 2 8 2.50C-4 63,3 ± 1,5 100,8 5 ± 1 2 8 4.50-6 114,3 ± 1,6 151,6 5 ± 1 2 8 3.75-6 95,2 ± 1,6 151,6 5 ± 1 2 8 3.00D-8 76,2 ± 1,6 202,4 197,5 5 ± 1 1+2 8 3.25D-8 82,5 ± 1,6 202,4 197,5 5 ± 1 1+2 8 4.33R-8 110,0 ± 2,3 202,4 202,4 1°30´±15´ 2+3 8 6.00E-9 152,4 ± 1,6 227,8 222,9 5 ± 1 1 8 4.00E-9 101,6 ± 1,6 227,8 222,9 5 ± 1 1+2 8 5.00F-10 127,0 ± 1,6 253,2 246,8 5 ± 1 1+2 16 5.50F-10 139,7 ± 1,6 253,2 246,8 5 ± 1 1+2 16 6.50F-10 165,1 ± 1,6 253,2 246,8 5 ± 1 1 16 5.00S-12 127,0 ± 1,6 308,8 301,3 5 ± 1 1+2 16 8.00G-12 203,2 ± 2,5 304,0 296,6 5 ± 1 1 16 3.75P-13 95,2 ± 2,3 334,0 330,2 3 ± 1 1 16 5.5-15 139,7 ± 2,5 386,0 381,0 5 ± 1 1 16 6.0-15 152,4 ± 2,5 386,0 381,0 5 ± 1 1 16 6.5-15 165,1 ± 2,5 386,0 381,0 5 ± 1 1 16 7.0-15 177,8 ± 2,5 386,0 381,0 5 ± 1 1 16 7.50-15 190,5 ± 2,5 386,0 381,0 5 ± 1 1 16 8.0-15 203,2 ± 2,5 386,0 381,0 5 ± 1 1 16 9.75-15 247,6 ± 2,5 386,0 381,0 5 ± 1 1 16 11.0-15 279,4 ± 3 386,0 381,0 5 ± 1 1 16 6.00T-20 152,4 ± 2,5 513,0 508,0 5 ± 1 1 16 6.5-20 165,1 ± 2,5 513,0 508,0 5 ± 1 1 16 7.0-20 177,8 ± 2,5 513,0 508,0 5 ± 1 1 16 7.5-20 190,5 ± 2,5 513,0 508,0 5 ± 1 1 16 8.0-20 203,2 ± 3 513,0 508,0 5 ± 1 1 16 8.5-20 215,9 ± 3 513,0 508,0 5 ± 1 1 16 10.0-20 254,0 ± 3 513,0 508,0 5 ± 1 1 16 8.5-24 215,9 ± 3 616,0 609,6 5 ± 1 1 16 10.0-24 254,0 ± 3 616,0 609,6 5 ± 1 1 16 Versions for NON-FIX Tyres A B C C1 Types and sizes Versions for FIX Tyres SUPER-ELASTIC MARANGONI INDUSTRIAL & MULTIPURPOSE TYRES 17
Page 1 and 2: Marangoni Super-Elastic 5 INDUSTRIA
Page 3: Marangoni Press on Band Cushion BS
Page 6 and 7: 6 SUPER-ELASTIC MARANGONI INDUSTRIA
Page 8 and 9: 8 SUPER-ELASTIC MARANGONI INDUSTRIA
Page 10 and 11: 10 SUPER-ELASTIC MARANGONI INDUSTRI
Page 19 and 20: Marangoni Press on Band Cushion BS
Page 21 and 22: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 23: Specific versions: Cushion Referenc
Page 26 and 27: 26 PNEUMATIC MARANGONI INDUSTRIAL &
Page 28 and 29: 28 PNEUMATIC MARANGONI INDUSTRIAL &
Page 30 and 31: 30 RING-PROTECTOR MARANGONI INDUSTR
Page 32: Marangoni Pneumatici S.p.A. Via del

T.Book_Finale.pdf

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?