ENGINEERING JAMES - James Thomas Engineering

GPTRUSS
General Purpose truss is manufactured from
5.08cm dia x 3.2mm wall and 2.54cm dia x
3.2mm wall 6082 T6 Aluminium tubing.
Supplied with Thomas truss bolts and nuts.
Ideal truss for conference, exhibition and
small venue work. By incorporating suitable
sleeve blocks, this truss can be used with our
Ground Support Systems.
See load tables on page 12
Part Code Description Weight
30.5cm GP truss
B4709 4 metre section 34
B4700 3 metre section 26.6
B4701 2.5 metre section 23.4
B4702 2 metre section 18.5
B4703 1.5 metre section 16
B4704 1 metre section 12.3
B4750 0.5 metre section 8.6
B4705 2 way corner block 6.3
B4710 3 way corner block 8
B4706 4 way corner block 9.3
B4711 5 way corner block 10.8
B4707 6 way corner block 12.5
B4106 30.5cm tower sleeve block 6.5
B4708 Flat pivot section
B4712 Lifting point 5.5
B4106 4 way sleeve block
- for 30.5 GP truss
JAMES
ENGINEERING
30.5cm GP truss
3
520.7
520.7
Part Code Description Weight
52cm GP truss
52cm GP truss
52cm GP truss end view 30.5cm GP truss end view
B4400 4 metre section 52
B4401 3 metre section 40
B4402 2.5 metre section 35
B4403 2 metre section 31
B4404 1.5 metre section 27
B4405 1 metre section 20
B4450 0.5 metre section 13
B4420 4 metre with castors 60
B4421 3 metre with castors 48
B4422 2.5 metre with castors 43
B4423 2 metre with castors 39
B4424 1.5 metre with castors 35
B4425 1 metre with castors 28
B4406 2 way corner block 15
B4415 3 way corner block 16
B4407 4 way corner block 17
B4407A 5 way corner block 18
B4408 6 way corner block 19
B4104 30.5cm tower sleeve block
B4109 30.5cm tower sleeve block
- 3 way with built in lifting point
B4411 Flat pivot section
B4409 0-270 degree pivot section 19.5
B4410 0-90 degree pivot section 19
B1312 Lifting point 7
B4104 4 way sleeve block for 52cm GP truss
304.80
304.80