Contents

Vibratory Double Beam Screed Flextool
Applications:
• Roadways • Airport aprons • Slipways
• Spillways • Tilt panels • Warehouse floors
Features:
• Vibrating screeds are an effective means of compacting large areas of concrete.
• The vibratory motion of the beams imparts a self propelling motion to the screed.
• Contractors can save labour and increase placement rates as a vibrating screed strikes and
compacts concrete in one pass.
• Pre-tensioned beams allow the surface flatness to be controlled by adjusting beam pretension
& are recommended for precision finishing.
• For spans up to 8.2 metres.
• Lifting handles are fitted at the ends of the beams. Pull ropes & handles are provided for
directional control.
• Two lifting eyes are fitted to the screed to facilitate site handling.
• The reliability of the machine has been well proven over many years. The powerful vibrator will
give long maintenance free life due to its sealed design, heavy duty bearings & oil bath lubrication.
Options:
• Vibrator models for use on steel pre-cast forms available on request.
• Special lengths, separate beam assemblies and lower amplitude vibrators are available to order.
(Non standard orders must be accompanied by a deposit.)
4.1 m / 6.5 m / 8.2 m Vibratory Screed
Type Motor Freq. Force Beams (Magnesium/Alluminium
(kW) (vib/min) (kN) structural RHS)
Electric 1.5 4,275 2.5 50 x 150 x 3 mm
Petrol (Honda) 4.1 4,500 2.7 50 x 150 x 3 mm
Air (FB1600) - 16,000 - 50 x 150 x 3 mm
Diesel (Yanmar) 4.0 4,500 2.7 50 x 150 x 3 mm
4.1 Metre Untensioned Beams
Type Part No. Weight
Electric F01410 84 kg
Petrol F09970 82 kg
Air F01771 78 kg
Diesel F03295 95 kg
6.5 Metre Pre-Tensioned Beams
Type Part No. Weight
Electric F01514 119 kg
Petrol F09575 117 kg
Air F01773 113 kg
Diesel F02499 130 kg
8.2 Metre Pre-Tensioned Beams
Type Part No. Weight
Electric F01520 133 kg
Petrol F09576 131 kg
Air F01774 127 kg
Diesel F02623 144 kg
Concrete Compaction 25