Contents

Blades Flextool
MF-10-66 MF-S34-18
MF-S36-10 MF-S40-18
MF-10-69 MF-S46-18
MF-FB34 MF-D36-2
MF-FB40 MF-FB46
MF-10-68
MF-D34-3 MF-D36-2
Combination Blades
Part No. To Suit Size Weight Quantity
(per set)
MF-10-66 864 mm (34”) MF 322x187 mm 5.0 kg 2 sets
MF-S34-18 864 mm (34”) MF 322x187 mm 8.0 kg 2 sets
MF-S36-10 914 mm (36”) TB/WK 355x190 mm 7.0 kg 2 sets
MF-S40-18 1016 mm (40”) MF 375x202 mm 9.0 kg 2 sets
MF-10-69 1016 mm (40”) MF 375x200 mm 6.0 kg 2 sets
MF-S46-18 1168 mm (46”) MF/TB/WK 450x187 mm 10.0 kg 2 sets
Combination blades are designed to be used for both initial floating & final finishing
Floating Blades- Clip On
Part No. To Suit Size Weight Quantity
(per set)
MF-FB34 D-34-3 finishing blade 330x202 mm 10.0 kg 1 set
MF-FB 34WP Replacement wear plate 6.0 kg 1 set
MF-D36-2 D36-2 finishing blade 357x202 mm 10.0 kg 1 set
MF-FB36WP Replacement wear plate 6.0 kg 2 sets
MF-FB40 D40-2 finishing blade 375x230 mm 10.0 kg 1 set
MF-FB40WP Replacement wear plate 6.5 kg 2 sets
MF-FB46 D46-2 finishing blade 470x250 mm 13.0 kg 1 set
MF-FB46WP Replacement wear plate 7.7 kg 2 sets
MF-10-68 D40-2 finishing blade 375x202 mm 7.5 kg 1 set
1 piece manufacture
Floating blades are designed to clip over the finishing blades & are used for initial floating on the
concrete floor. These blades are manufactured in two parts that bolt together, this allows the reuse
of the top plate after the wear plate has worn out.
Finishing Blades
Part No. To Suit Size Weight Quantity
(per set)
MF-D34-3 864 mm (34”) MF 324X152 mm 4.5 kg 1 set
MF-D36-2 914 mm (36”) TB/WK 355x152 mm 4.2 kg 1 set
MF-D40-2 1016 mm (40”) MF 375x202 mm 6.0 kg 1 set
MF-D46-2 1168 mm (46”) MF/TB/WK 455x152 mm 6.0 kg 1 sets
MF-D40-2 MF-D46-2 MF - Master Finish, TB - Terex Bartell, WK - Wacker
Finishing blades are designed for use when a finer finish is required on the concrete. The blades
are reversible & may be rotated when the edge is worn to allow a second use.
Concrete Power Finishing 29