Aerofoil and Soffit Panels - EDM Spanwall
Aerofoil and Soffit Panels - EDM Spanwall
Aerofoil and Soffit Panels - EDM Spanwall
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Aerofoil</strong> <strong>and</strong> <strong>Soffit</strong> <strong>Panels</strong><br />
3
<strong>EDM</strong> Products do not have a st<strong>and</strong>ard aerofoil shape or size.<br />
We work with the Architect to create a detail in both scale <strong>and</strong> shape<br />
which compliments the overall building design.<br />
The wide range of metals along with pre-coating or post coating<br />
finishes can offer a solution to any project budget.<br />
The soffit panels can be fabricated in the same sheet metal material<br />
or as a bonded composite panel in modules to integrate with the<br />
aerofoil joints.<br />
<strong>Aerofoil</strong> <strong>and</strong> <strong>Soffit</strong> <strong>Panels</strong><br />
4<br />
A wide range of complex aerofoil shapes can be formed in polyester powder coated<br />
or pre-coated aluminium. The aerofoil coping can also be manufactured in stainless<br />
steel, zinc, copper, etc. complete with it’s own set-out Bracket <strong>and</strong> Support system.<br />
The soffit panel can be manufactured in matching metal finished in single tray or as<br />
a bonded panel for panel flatness <strong>and</strong> greater spanning between supports.<br />
ARCHITECTURAL<br />
METAL PRODUCTS<br />
C COPYRIGHT OF THE DESIGNERS<br />
DR DESIGN RIGHTS<br />
E: info@edmspanwall.com www.edmspanwall.com
The aerofoil section shall be manufactured with integral butt straps.<br />
The aerofoil shall be supported on 2mm galvanised adjustable<br />
brackets which can be truly aligned off the structural steelwork.<br />
The aerofoil shall be formed from mill finished aluminium <strong>and</strong><br />
finished in a polyester powder paint to the selected RAL colour.<br />
<strong>Aerofoil</strong> edging have a min radius of 125mm. please contact our<br />
Technical Department reference aerofoil shapes, min/max radius dim’s.<br />
<strong>Aerofoil</strong> <strong>and</strong> <strong>Soffit</strong> <strong>Panels</strong><br />
Typical <strong>Aerofoil</strong> Section<br />
R125 min<br />
5<br />
20mm open joint<br />
to soffit panel tray<br />
ARCHITECTURAL<br />
METAL PRODUCTS<br />
C COPYRIGHT OF THE DESIGNERS<br />
DR DESIGN RIGHTS<br />
E: info@edmspanwall.com www.edmspanwall.com
Typical Specification (A)<br />
The soffit panels shall be manufactured from 0.9mm thickness PVF2<br />
coated aluminium skins fully bonded to an extra high density<br />
insulation core.<br />
The panels shall be fixed onto the secondary steelwork supports by<br />
means of an extruded aluminium pressure plate with a 20mm wide<br />
black EPDM gasket seal from the <strong>Spanwall</strong> Panel System.<br />
Typical Specification (B)<br />
The soffit panels shall be manufactured from 3mm thickness mill<br />
finished aluminium fully formed on all four sides.<br />
The panels shall be fixed onto the secondary steelwork supports by<br />
means of self drilling, self tapping stainless steel screws in the 20mm<br />
open shadowline joint.<br />
The panels shall be finished in a polyester powder paint to the<br />
selected RAL colour.<br />
<strong>Aerofoil</strong> <strong>and</strong> <strong>Soffit</strong> <strong>Panels</strong><br />
<strong>Soffit</strong> Panel Joint Details<br />
Bonded soffit<br />
panel with<br />
gasket joint<br />
Secondary steel<br />
support system<br />
20mm<br />
6<br />
Secondary steel<br />
support system<br />
Tray soffit<br />
panel with<br />
open joint<br />
20mm<br />
Scale 1:1<br />
ARCHITECTURAL<br />
METAL PRODUCTS<br />
C<br />
COPYRIGHT OF THE DESIGNERS<br />
DR DESIGN RIGHTS<br />
E: info@edmspanwall.com www.edmspanwall.com