The way to recommend VELVET X-Mini by HANSATON. - Puretone

The fitting.
Perfect system:
The VELVET X-Mini can be fitted and programmed in no time at all.
The simple receiver selection.
A special length gauge (black) is available for selecting the
receiver, which is placed on the ear of the wearer.
The tip on the tragus determines the correct length of the
receiver. The digit on the length gauge is the same height
as the tip of the tragus and can also be found on the relevant
receiver.
Various domes available.
Domes are available in a wide range of dimensions to enable
optimal fit in the auditory canal and the required sound
pressure level.
• Open: 6, 8, 10 mm
• Closed: 8, 10 mm
• Double Dome closed: 8-10, 10-12 mm
All models are equipped with cerumen protection
(C guard or grid filter)
We strongly recommend that the P receiver only be adjusted
with individually made earmoulds.
Replacing the receiver unit.
Turn the receiver unit 45° anti-clockwise.
Pull off the receiver unit.
Clip on the receiver unit.
The marks must lie over
each other!
Turn the receiver unit 45° clockwise.
Installation and programming.
For programming, at least Connexx 6.1/Hansafit 6.2 must
be installed.
The wired connection of VELVET X-Mini to the computer
takes place with a special adapter, which is inserted in the
battery compartment in place of the battery.
The fitting software recognizes the relevant receiver automatically, enabling the receiver required for the individual hearing
loss to be selected easily.