How to Use Some Replacement to Repair a Wii Case?

How to Use Some Replacement to Repair a
Wii Case
From http://blog.blmall.com/how-to-replace-a-wii-case/
Wii components square measure offered on our BLMALL. we tend to stock a a good vary of
spare components for the Nintendo Wii, to induce you gambling again! you'll be able to save
yourself a bundle with spare parts(such as Remote Controller, Nunchuk, Case, Cable, twin
Charging Station, Batteries, Adapter, receiver with electro-acoustic transducer, sport Wheel
Controller)from our search.
How to Replace a Wii Case after you got a brand new pretty case here BLMALL can provide
you with suggestions as below:
Instructions
1.Turn the Wii the other way up and take away the battery receptacle mistreatment the
Phillips head screwdriver.
2.Remove the four Phillips head screws on very cheap of the console, and also the single
Tri-Wing screw higher than the battery clip compartment. The screws have plastic covers
over the highest, which might be simply removed employing a knife or nail.
3.Turn the Wii on its aspect therefore the front of the console is on the left, and also the
diagonally-shaped corner of the case is within the higher right. take away the four screws
below the tiny plastic tabs. there's one screw in every corner of the casing.
4.Lift the drive plate off the front of the Wii rigorously. Disconnect the 2 wires hooked up to
the drive plate by rigorously propulsion the connective off the motherboard.
5.Open the 2 lids on high of the Wii that cowl the GameCube connective sockets and also the
memory card slots. undo the covers at their hinges and take away them from the casing. take
away the Tri-Wing screws therefore the connective socket cowl are often removed.
6.Remove the four Phillips head screws beneath the connective socket cowl. the 2 sides of
the Wii case will currently be faraway from the console’s contents.

7.Reverse the steps to connect the replacement case to the Wii console.
Remote and Nunchuk Controller + Case for Wii/Wii U
Highlights
Great price and ideal for Wii homeowners
Works and sounds like the first Nintendo Remote and Nunchuk except for the fraction of the
value
Excellent build quality, batteries and battery cowl match cleanly
Connects to Associate in Nursing third party, OEM or original Wiimote
Wireless Bluetooth interface
Powered by two x NiMH/NiCd/Alkaline AA batteries (sold separately)
Cable length: 97cm
Specifications
Specifications
For
Accessory Type
Interface
Color
Wii U, Nintendo Wii
Controllers
Wireless
Black
Dimensions (cm) 10 x 7 x 1.1
Weight (kg) 0.182
Package Contents
1 Remote, 1 Controller

Nintendo Wii U PRO Controller Free Shipping
Specifications
For
Accessory Type
Features
Color
Wii U
Controllers
Novelty
White, Black
Dimensions (cm) 16.0 x 10.0 x 6.0
Weight (kg) 0.19
Package Contents
1 Controller