in detail - Metz

76 MZ-5 DiGiTAl
45 Cl-4 DiGiTAl
BASiC / KiT
Configuration features:
System-Blitzbetriebsarten
Cannon e-TTl- / e-TTl-ii flash mode • / • • / • • / • • / • • / • • / –
Canon Fe flash exposure memory for e-TTl and e-TTl-ii flash mode • • • • • •
Canon e-TTl remote flash system as master/controller/slave • / • / • – / – / • – / – / •
leica group number control (GnC) • • • •
nikon 3D multi-sensor fill-in flash mode • • • • •
nikon D-TTl / 3D flash mode • / • • / • • / • • / • • / •
nikon FV flash exposure memory for i-TTl and i-TTl-Bl flash mode • • • • • • •
nikon i-TTl / i-TTl-Bl flash mode • / • • / • • / • • / • • / • • / • • / –
nikon matrix controlled fill-in flash mode • • • • • •
nikon underexposure warning in eV (f-stops) • • • • •
nikon i-TTl remote flash system as master/controller/slave • / • / • – / – / • – / – / •
Olympus TTl flash mode with measurement pre-flash technique • • • • • •
Olympus/Panasonic/leica Four Thirds System (TTl compatible) • • • • • •
Olympus Four Thirds system TTl remote flash system as master/controller/slave • / • / • – / – / • – / – / •
Pentax/Samsung contrast control • • • • • •
Pentax/Samsung P-TTl flash mode • • • • •
Pentax Spot-beam mode • • • • • •
Pentax/Samsung P-TTl remote flash system as master/controller/slave • / • / • – / – / • – / – / •
Sony DSlr-ADi flash control • • • • •
Sony DSlr multi-zone flash measurement (TTl pre-flash measurement) • • • • •
Sony DSlr remote flash system as master/controller/slave
Guaranteed in the future
– / – / • – / – / • – / – / •
Firmware update via Metz Service • • • • • • • •
Firmware update via USB port
Power supply
• • •
runs on alkaline-magnesium batteries (1.5 V) 3) 3) • • • • • • • • •
runs on niCad rechargeable batteries or niMH rechargeable batteries (1.2 V) • • • • • • • • •
runs on lithium batteries (1.5 V) • • • • • •
runs on Metz niMH rechargeable battery pack • • •
external energy supply with Metz Power Pack P 76
Number of flashes (at full light output)
• • • • •
running on alkaline-magnesium batteries (1.5 V) 170 100 180 180 210 240 450 450 100 5) 150 140 5)
running on niCd rechargeable batteries (1.2 V/600 mAh) 70 60 90 85 160 160 35 5) 75 150 5)
running on niMH rechargeable batteries (1.2 V/1600 mAh) 180 180 250 205 320 320 140 5) 150 200 5)
running on lithium batteries (1.5 V) 320 240 460 370 175 5) 250 5)
running on Metz niMH rechargeable battery pack (1600 mAh) 160 200 130
external energy supply with Metz Power Pack P 76
Flash cycle time in sec. (min./max.)
350 400 430 430
running on alkaline-magnesium batteries (1.5 V) 0,1/4 0,3/11 0,1/5 0,1/6 0,1/4 0,2/5 0,3/5 0,3/5 0,3/8 0,3/10 0,3/4
running on niCd rechargeable batteries or niMH rechargeable batteries (1.2 V) 0,1/5 0,1/5 0,1/4 0,2/4 0,3/5 0,3/5 0,3/6 0,3/8 0,3/4
running on lithium batteries (1.5 V) 0,1/6 0,1/10 0,1/4 0,2/6 0,3/5 0,3/5 0,3/6 0,3/8 0,3/5
running on Metz niMH rechargeable battery pack 0,1/4 0,1/4 0,3/7
external energy supply with Metz Power Pack P 76
Size and weight
0,3/2,5 0,1/3 0,1/2,5 0,1/2,5
Weight without power source in oz (approx.)
lamp pole
Control section
31.04
4.87
23.99 20.11 12.52 16.93 11.99 11.46 7.23 7.23 4.94 4.23 6.70
W
Approx. dimensions in inches (W x H x D)
lamp pole Control section
4.06
2.64
3.62 3,62 2.80 2.95 2.80 2.95 2.80 2.87 2.97 2.56 5.24
H lamp pole Control section
9.61
1.38
9.72 9.72 5.83 4.92 5.39 4.92 4.53 4.33 3.27 3.86 5.67
D lamp pole Control section
4.65
3.50
4.02 4.02 3.90 4.25 3.90 4.25 3.74 3.43 1.28 2.13 1.50
45 Cl-1
58 AF-1 DiGiTAl
54 MZ-4i
48 AF-1 DiGiTAl
44 MZ-2
1) With connecting cable sCA 3045
2) With slave adapter sCA 3083 digital and connecting cable sCA 3045
3) With battery case 45-39
4) With slave adapter sCA 3083 digital
5) Running on micro-cells (AAA): niCd (250 mAh), niMh (1000 mAh)
36 AF-4 DiGiTAl
36 C-2
28 CS-2 DiGiTAl
20 C-2
15 MS-1 DiGiTAl
43