Maytag Virtual Brochure

DoveBid 

Worldwide 

Amsterdam 

Atlanta 

Austin 

Bangkok 

Boston 

Cape Town* 

Chicago 

Dallas 

Detroit 

Dublin 

Frankfurt 

Hartford 

Hong Kong 

Houston 

Johannesburg* 

Kuala Lumpur 

Leeds 

London 

Los Angeles 

Manila* 

Melbourne 

Mexico City 

Minneapolis 

New York 

Paris 

Sacramento 

San Diego 

San Francisco 

San Jose 

Santa Fe 

Sao Paulo* 

Seattle 

Shanghai 

Shenzhen 

Singapore 

Sydney 

Taipei* 

Tokyo 

Toronto 

Tucson 

*An alliance partner 

DoveBid ® 

Webcast Auction 

Surplus equipment from the ongoing operations of 

Complete 2.4-Million sq ft 

Refrigerator Manufacturing Facility 

Featuring: Refrigerator Manufacturing, 

Stamping, Fabricating, Plastic Extruding, 

Thermoforming, Ancillary Plastics, Toolroom, 

Finishing, Material Handling Equipment 

October 27, 2004 • 9am CT 

Galesburg, Illinois 

® 

www.industrialauctioneers.org 

www.dovebid.com

2 

Webcast Auction 

Surplus equipment from the 

ongoing operations of 

MAYTAG CORPORATION 

October 27, 2004 

Beginning at 9am CT 

2-Day Preview 

October 25 & 26, 2004 

9am to 4pm CT each day 

and morning of the sale 

Auction & Preview 

Location 

1801 Monmouth Boulevard 


Directions 

From I-74: Proceed on I-74 to 

US-34 West (toward Monmouth) 

(Exit 46A). Proceed on US-34 

West approx. 2-1/2 miles to 

US-150 East/Henderson St. Exit. 

Proceed south on Henderson 

Street approx. 2-6/10 miles 

(7 traffic lights) to Monmouth 

Boulevard. (1st stoplight after 

railroad tracks). Turn right and 

proceed approximately 8/10 mile 

to auction and preview location 

on the right side. Watch for 

auction and parking signs. 

Area Lodging 

Country Inn & Suites by Carlson 

Galesburg • Phone 309.344.4444 

Fairfield Inn Galesburg 

Phone 309.344.1911 

Holiday Inn Express Hotel 

Galesburg • Phone 309.343.7100 

Regency Hotel & Suites 

Phone 309.344.1111 

Additional Information 

• A buyer’s premium will apply at 

this sale 

• The auction will be conducted 

in English and will accept only 

U.S. currency 

• Bid live in person or on the website 

at www.dovebid.com 

• Select assets may be subject to 

prior sale 

Auctioneer’s Note 

DoveBid is extremely pleased to have 

been selected by Maytag Corporation 

to conduct this Webcast Auction of a 

Complete 2.4-Million sq ft Refrigerator 

Manufacturing Facility. The auction will 

feature a wide range of quality 

equipment, including: 

• Refrigerator Manufacturing Lines 

• Stamping, Fabricating & Toolroom 

Machinery 

• Plastic Extruding, Thermoforming & 

Ancillary Plastics Equipment 

• Finishing & Handling Equipment 

The Webcast Auction will be conducted 

in Galesburg, Illinois with a preview of 

the assets being held on October 25 & 

26, 2004 beginning at 9am CT each day. 

Feel free to attend the preview or visit 

our website at www.dovebid.com to 

download the auction catalog. 

If you are unable to attend the auction 

in person or participate over the Web, 

you are able to submit a proxy bid right 

from DoveBid’s website. 

Please remember that assets are sold as 

is, where is, and with all faults when 

participating in an auction. And as a 

courtesy to our Web buyers, DoveBid 

can provide contact information for 

shipping companies that will be 

attending this auction. Buyers are 

responsible for removal of assets and 

all shipping and rigging charges. 

Thank you in advance for your interest 

and we look forward to seeing you in 

person or on the Web on auction day. 

® Can’t make it to 


No problem. With 

DoveBid’s proprietary 

Webcast technology bidders around the world can 

bid at this auction from the convenience of their 

home or office through the Internet. Webcast 

technology allows you to virtually bid against 

bidders who are on the factory floor. 

Log on to www.dovebid.com and register even on 

auction day to bid in real time! All you need is a 

computer, Internet access, and a touch-tone 

telephone to participate. 

Prior to the auction, preview the assets online via 

digital photos and comprehensive descriptions. 

During the auction, view the current asset being 

sold on your computer screen as you listen to the 

Auctioneer live on your telephone. You press 1 on 

the telephone keypad to raise your paddle and press 

the # key to end your bid. And as a courtesy to our 

Web buyers, DoveBid can provide contact 

information for shipping companies that will be 

attending the auction. Thousands of bidders from 

hundreds of locations around the globe have 

participated in DoveBid Webcast Auctions. It’s fast, 

simple and convenient! Save money on travel 

expenses and next time we will see you ONLINE! 

Table of Contents 

Air Compressors & Dryers . . . . . . . . . . . . . .19 

Banding Equipment . . . . . . . . . . . . . . . . . . .18 

Boilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 

Bridge Cranes . . . . . . . . . . . . . . . . . . . . . . .15 

Cabinet Foaming Systems . . . . . . . . . . . . . .12 

Cafeteria Equipment . . . . . . . . . . . . . . . . . . .19 

Central Vacuum Systems . . . . . . . . . . . . . . .13 

CNC Turret Punch . . . . . . . . . . . . . . . . . . . . .9 

CNC Vertical Milling Machine . . . . . . . . . . . .12 

Conveyors, Belt, Chain, Roller, Slat . . . . . . .18 

Copper Tube Gas Soldering Machines . . . . . .9 

Cut-To-Length & Notching Lines . . . . . . . . . . .6 

Dial Index Door Foam Machine . . . . . . . . . .12 

Drill, Radial . . . . . . . . . . . . . . . . . . . . . . . . .13 

Elevators . . . . . . . . . . . . . . . . . . . . . . . . . . .18 

Extrusion Lines . . . . . . . . . . . . . . . . . . . . . . .11 

Fabricating Equipment . . . . . . . . . . . . . . . . . .9 

Fire Suppression Systems . . . . . . . . . . . . . .19 

Foam Equipment . . . . . . . . . . . . . . . . . . . . .12 

Forklifts . . . . . . . . . . . . . . . . . . . . . . . . . .16-17 

Granulators . . . . . . . . . . . . . . . . . . . . . . . . .12 

Grinders . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 

Inspection Equipment . . . . . . . . . . . . . . . . . .13 

Jib & Gantry Cranes . . . . . . . . . . . . . . . . . . .15 

Lab & Test Equipment . . . . . . . . . . . . . . . . .14 

Lathes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 

Material Handling Equipment . . . . . . . . . .15-18 

Mezzanines . . . . . . . . . . . . . . . . . . . . . . . . .18 

Milling Machines . . . . . . . . . . . . . . . . . . . . . .13 

Overhead Chain Conveyor Systems . . . . . . .18 

Pallet Racking & Shelving . . . . . . . . . . . . . .18 

Personnel Carts . . . . . . . . . . . . . . . . . . . . . .17 

Piercing Machines . . . . . . . . . . . . . . . . . . . .11 

Plastic Equipment . . . . . . . . . . . . . . . . . .10-12 

Plastic Injection Molding Machine . . . . . . . . .11 

Powder Coating & Curing Lines . . . . . . . . . .14 

Press Brake . . . . . . . . . . . . . . . . . . . . . . . . . .9 

Press Feed Equipment . . . . . . . . . . . . . . . . . .8 

Presses, Straight Side & OBI . . . . . . . . . . . . .8 

Presses, Trim . . . . . . . . . . . . . . . . . . . . . . . .11 

Printing Equipment . . . . . . . . . . . . . . . . . . . .15 

Punch, Trim, Form & Welding Lines . . . . . . . .7 

Railcar Unloader . . . . . . . . . . . . . . . . . . . . .15 

Raw Material Storage Silos . . . . . . . . . . . . .13 

Refrigerator Cabinet Fabrication Lines . . . . .3-4 

Refrigerator Door Forming & Welding Lines . .5 

Roll Forming Line . . . . . . . . . . . . . . . . . . . . . .7 

Saw, Vertical Band . . . . . . . . . . . . . . . . . . . .13 

Saws, Radial Arm & Table . . . . . . . . . . . . . .13 

Scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 

Scissor-Lift Tables . . . . . . . . . . . . . . . . . . . .18 

Scrap Conveyors . . . . . . . . . . . . . . . . . . . . .18 

Shears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 

Sheet Lifters . . . . . . . . . . . . . . . . . . . . . . . . .18 

Shop & Factory Equipment . . . . . . . . . . . . . .19 

Slitting Line . . . . . . . . . . . . . . . . . . . . . . . . . .6 

Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 

Telephone & Paging Systems . . . . . . . . . . . .19 

Thermoformers, Dial Index Rotary . . . . . . . .10 

Thermoforming Lines . . . . . . . . . . . . . . . . . .10 

Toolroom Equipment . . . . . . . . . . . . . . . . . .13 

Trailers, Highway . . . . . . . . . . . . . . . . . . . . .15 

Tube Straightening & Cut-To-Length Lines . . .7 

Washing & Drying Lines . . . . . . . . . . . . . . . .14 

Welders & Welding Robots . . . . . . . . . . . . . . .9 

To view a complete asset list, visit our website @ www.dovebid.com

Refrigerator Cabinet Fabrication Line 

RWC AUTOMATIC PRE-PAINTED SIDE-BY-SIDE 

REFRIGERATOR CABINET FABRICATION LINE 

(LINE #3) (1998), With 4-Piece Frame Fabrication Line, 

Cycle Time 23 Seconds, Consisting of: 

(Station #10 thru #70: Cabinet Wrapper (Outer Case) Flat Section) 

• Station #10 - Dual-Sided Wrapper Blank Destacker: (2) Loading Positions, (2) 

Cransesaver 4-Strand Chain Conveyors, (4) Multiple Chain Transfer Conveyors, 

Vacuum Sheet Lifter, Overhead Destack Carriage, Double Sheet Prevention 

• Station #20 - Notch & Pierce: Notcher Punch (For Locating Notches), Notch & Pierce 

Punch (For Square Hole in Mullion for Tube Press), Piercing Punch (Piercing 21-Foam 

Vent Hole Slots), 4-Strand Chain Conveyor, (3) Air-Operated Toggle-Type Presses, 

Multiple Position Blank Stop, Blank Sheet Crowder/Locater Positioner, Scrap Conveyor 

• Station #30 - 180° Turnover: (2) Entry & Exit Transfer Systems, Blank Stop, Lancaster 

Barrel Cam Indexer 

• Station #40 - Align & Feed to Roll Former: 4-Strand Chain Transfer Conveyor, (2) 

Launch Carriages, Each With (2) Clamping Units, Blank Stop, Sheet Positioner 

• Station #50 - Roll Form Front & Rear Flanges: Tishken Model 32-HW-AS-3 28- 

Station Duplex Roll Former, 32-Station Base, 75-HP Motor, Variable Speed Drive, 

Speed Range to 300 FPM, Entry Pinch Roll Stand, Insulated Hood (Over Roll Former 

to Maintain 120° to 150° F), (2) Robotron Induction Heating Coils, With 50kW Power 

Supply, Ircon Non-Contact Infrared Temperature Controller, Compact Distilled Water 

Recirculating System, Lepel Induction Pass-Thru Furnace, With Lepel Induction 

Generator, 200kW, 30KHz, 2000V, 500A, Digital Entrance & Exit Furnace Controls 

• Station #60 - Toe Fold Bottom Flanges & Form Offset Mitered Corners: 4-Strand 

Chain Conveyor, Blank Stop, Positioner, (2) Toe Flange Folders, Bending Wings With 

Adjustable Stops, (2) Air-Operated Self-Equalizing Trailing Mitered Corner Offsetting 

Units, Vacuum Sheet Lifter 

• Station #70 – 90° Tilt-Up & Feed to U-Folder: 4-Strand Chain Transfer Conveyor, 

Urethane Roll Exit Conveyor, Magnetic Holdown, Blank Stop, Crowder Positioner, 

Air-Operated Cantilever Arm Sheet Tilter 

(Station #5 thru #85: One-Piece Back/Bottom Line) 

• Station #5 - Pre-Notched, Pierce & Blank Destacker & 180° Turnover: 3-Strand 

Chain Conveyor, Vacuum Sheet Lifter, Squaring & Double Sheet Detection, Lancaster 

Barrel Cam 180° Indexer Turnover, Air Lift Exit Chain Conveyor (UnloadEmpty Pallet) 

• Station #15 - Crease Compartment Folds & Dimple: Crease Back/Bottom Blank in 

(3) Places, Establishing Bend Line Locations in Later Stations, Pierce (2) Dimples for 

Self-Tapping Screws, Hyd. Down-Acting C-Frame Press With Up-Acting Dimpler 

• Station #25 - Fold Side Flanges: Form All Side Flanges in Lower Compartment Area, 

(6) Flange Bends, Hydraulic Down-Acting C-Frame Press 

• Station #35 - Fasten Side Foam Legs To Back/Bottom: Feed, Load & Fasten Right 

& Left Side Panels to Back/Bottom Blank, Locate & Clamp Press, Clinch Equipment 

With (12) Tog-L-Loc Joints Per Panel Leg, Multi-Clinch Unit With BTM Tog-L-Loc 

Punches & Dies, (6) Clinch Heads, 1, 2 or 3 Clinch Joints, Size .180" Diameter, Clinch 

Positioning, Multi-Axis Pick & Place Vacuum Side Panel Loader With Gripper 

Assemblies & Horiz. Transfer Will Remove Side Panel From Each Part Magazine & 

Load Into Clinch Head, Transfer Stroke 4’ to 5', 8 to 10 Dual Chain Indexing Magazine 

Part Feeder With Chain Attachments, Air-Operated Jackson Type Indexing Unit 

• Station #45 - Idle Station: With Locate & Clamp 

• Station #55 - Final Fold Back/Bottom 90°: Locate & Clamp, Hydraulic Down-Acting 

Compliant Inner Backup Die, Outer or Lower Bending Will Forms Back/Bottom Up 90° 

• Station #65 - Accumulate & Cross Transfer to Main Line: Accumulate Up to (4) 

Completed Assemblies & Load Back/Bottom onto Shuttle Rails, Locate & Clamp 

• Station #75 - Overhead Back/Bottom Shuttle: Vertical Gantry Pick & Place Vacuum 

Lifter With Horiz. Shuttle With Approx. 4' Travel, Multiple Zone Accumulating Conveyor 

• Station #85 - Back/Bottom Transfer: Transfer Blank/Assembly from Station to Station, 

(7) H-Frame Structures (To Support Overhead Shuttle Rails & Part Carriers), 2-Pair of 

Hardened Anodized Extruded Aluminum Shuttle Rails, Supported & Guided on 

Hardened (Coated) Roller Cluster Assemblies, (7) Carriers With Vacuum Lifters, 

Shuttle Travel Approximately 10' 

(Station #80 thru #130 - Cabinet Line 

High Section or Final Assembly) 

• Station #80 - U-Fold & Fasten to Back/Bottom, (With Dual 

Idle Stations): Outer Case is U-Folded, Assembled & Fastened 

to Back/Bottom Assembly, 4-Post Design, High Speed Hydraulic 

Gear & Rack Lift Unit, Upper Carriage Wing Benders, 90° Tilt-Up 

Station, Outer Hydraulic Wing Benders With Crimp Backup Die 

(For Inner Fixture Crimp Units), Inner Fixture With Full Length 

Dies (For Folding Top Sides) & (2) Hydraulic Rams (For 

Crimping Cabinet Rear Flange to Back/Bottom), (2) Rear Clinch 

Units (Toe Flange) With BTM Tog-L-Loc Dies & Buttons, (For 

Clinching Toe Flange to Back/Bottom Side Panels), Urethane- 

Covered Roll Infeed Conveyor With Magnetic Holdown, Blank 

Stop, Crowder Positioner, Air-Operated Idle Lift (For Elevating 

Dual Cabinets Above Transfer Nests, Allowing Clearances for 

Shuttle Rails to Return) 

• Station #90 - Final Crimp Cabinet to Back/Bottom Assembly 

& Finish Crimp Side Flanges to Wrapper: Outer Case Finish 

Crimped (Top & Sides) to Back/Bottom & Side Panels, 4-Post 

Design, High Speed Hyd. High Lift With Gear & Rack Operation, 

Outer Top & Side Wings With Backup Dies (For Crimping), Inner 

Fixtures With (3) Each (Leading & Trailing) Hyd. Crimp Rams 

(For Fastening Cabinet Rear Flange to Back/Bottom at Top, 

Sides & Bottom Side Panel Locations), Clamp & Positioning 

• Station #100 - Load & Clinch Frame to Cabinet & Clinch 

Back/Bottom to Frame: Load & Fasten Frame Reinforcement 

Weldment to Outer Case (8) Places & Clinch Back/Bottom to 

Reinforcement Frame, 4-Post Design, Air Operated Lower 

Elevator, Clamp & Position, (6) Part Dual-Arm Pie Rack-Type 

Indexing Magazines With Air-Operated Jackson Type Indexing 

Unit, Multi-Axis Overhead Pick & Place Loading Device With 

Multiple Gripper Assemblies & Vertical Lift (For Final Positioning 

Against Cabinet Flanges), Transfer Stroke Approximately 5’ to 

6', (2) Air-Operated Clinchers (For Back/Bottom to Lower 

Frame), Dual Tooled With .180" Diameter BTM Tog-L-Loc Dies 

& Buttons, Both Units Will Index to Accommodate (8) Clinches, 

(2) Air-Operated Toggle-Type Clinch Lock Units (For Attaching 

Upper Flange to Frame), Clinch Units Will Shift or Index to Place 

(4) Clinch Lock Joints in Top Flange, (2) Tech-Line Air-Operated 

Toggle-Type Clinch Units (For Clinch Locking, (1) Place Each 

Side of Lower Frame to Cabinet Front Flange), Air-Operated 

Clinch Positioning Slides 

• Station #110 - Final Reinforcement Frame to Cabinet: Finish 

Attaching Reinforcement Frame to Cabinet (Sides) Front Flange 

in (18) Places Each Cabinet, 4-Post Design, Air-Oper. Lower 

Elevator, Clamp & Position, (6) Tech-Line Air-Operated Toggle 

Type Clinch Lock Units (Attaching Cabinet Side Flanges to 

Reinforcement Frame), Clinch Units Shift or Index (3) to Place a 

Total of (9) Clinch Lock Joints in Each Cabinet, Clinch Heads 

Attached to Positioning Slides for Indexing & Final Positioning 

• Station #120 - Unload: Air-Operated Elevate & Transfer Unit 

• Station #130 - Double Compensating Shuttle: 4-Pair (2 Each) 

Hardened Anodized Extr. Aluminum Shuttle Rails, Supported & 

Guided on Hardened (Coated) Roller Cluster Assemblies, (12) 

Sets of Urethane-Covered Transfer Nests, (4) Per Cabinet 

• Offline: Barrel 1800RDM 6-Station 96" Dial Index Table, 3-HP 

DC Drive, (2) Manual Load Stations, (2) Fanuc Arc Mate 100 

6-Axis Welding Robots, R-J2 Controller, Hobart Arcmaster 351 

Power Source With Robot Interface, Tweeco Air-Cooled MIG 

Welding Guns, Argon Flowmeter, Binzel Tip Cleaner, Unloader & 

Accumulator, Allen-Bradley SLC-5/04 Programmable Controller 

• Controls: Line Contains (4) Sections or Lines of Equipment, 

Fully Integrated to Operate as a Single System, Allen-Bradley 

PLC-5 & SLC-5 Series Programmable Controllers, PC Interface 

3 

To schedule an auction, call our Minneapolis Office • Phone 952.848.8460

Refrigerator Cabinet Fabrication Line 

1997 

RWC LINE #2 • VIEW OF STATIONS 

#10 THRU #50 

RWC LINE #2 • DESTACKER 

RWC LINE #1 • PRE-NOTCHED BACK-BOTTOM 

DESTACKER AND POSITIONER 

RWC LINE #2 • VIEW OF MULLION 

LOADERS AND FASTENING STATIONS 

RWC LINE #2 • VIEW OF CABINET 

ASSEMBLY STATIONS 

RWC LINE #1 • VIEW OF ASSEMBLY STATIONS 

4 

RWC AUTOMATIC PRE-PAINTED TOP-MOUNT REFRIGERATOR CABINET 

FABRICATION LINE, (LINE #1 & #2) (BOTH 1997), Consisting of: 

(Station #10 thru #50: 

Cabinet Wrapper (Outer Case) Flat Section) 

• Station #10 - Dual-Sided Wrapper Blank Destacker: 

(2) Loading Positions, (2) Cransesaver 4-Strand Chain 

Conveyors, (4) Multiple Chain Transfer Conveyors, 

Vacuum Sheet Lifter, Overhead Destack Carriage, 

Double Sheet Prevention 

• Station #20 - 180° Turnover: (2) Entry & Exit Transfer 

Systems, Blank Stop 

• Station #30 - Align & Feed to Roll Former: 4-Strand 

Chain Transfer Conveyor, Pinch (4) Places, Blank 

Stop, Sheet Crowder/Locator Positioner 

• Station #40 - Roll Form Front & Rear Flanges: 

Tishken Model 30-HW-AS-3 28-Station Duplex Roll 

Former, 75-HP Motor, Variable Speed Drive, Speed 

Range to 300 FPM, Entry Pinch Roll Stand, Insulated 

Hood (Over Roll Former to Maintain 120° to 150°F), (2) 

Robotron Induction Heating Coils, With 50kW Power 

Supply, Ircon Non-Contact Infrared Temperature 

Controller, Compact Distilled Water Recirculating 

System, Lepel Induction Pass-Thru Furnace, With 

Lepel Induction Generator, 200kW, 30KHz, 2000V, 

500A, Digital Entrance & Exit Furnace Controls 

• Station #50 - Toe Fold & Offset Front Mitered 

Corners: 4-Strand Chain Conveyor, Blank Stop, 

Positioner, (2) Toe Flange Folders, Vacuum Sheet 

Lifter 

• Station #60 - 90° Tilt-Up & Feed to U-Folder: 

4-Strand Chain Transfer Conveyor, Urethane Roll Exit 

Conveyor, Magnetic Holdown, Blank Stop, Crowder 

Positioner, Air-Operated Cantilever Arm Sheet Tilter 


One-Piece Back/Bottom Line) 

• Station #5 - Pre-Notched Back/Bottom 

Destacker & Positioner, With Empty 

Pallet Run-Out 

• Station #15 - Crease Compartment 

Folds: Crease Back/Bottom Blank in 

(3) Places, Establishing Bend Line 

Locations in Subsequent Stations 

• Station #25 - Fold Side Flanges Down: 

Hydraulic Down-Acting C-Frame Press 

• Station #35 - Manual Load, Auto Place 

Tog-L-Loc Left & Right Foam Legs To 

Back/Bottom: (13) Clinches Per Panel, 

8 to 10 Dual Chain Indexing Magazine 

Part Feeder With Chain Attachments, 

Air-Operated Jackson Type Indexing 

Unit, -Station #55 - Idle Station: With 

Locate & Clamp 

• Station #65 - Final Fold Back/Bottom 

90° Up: Locate & Clamp, Hydraulic 

Down-Acting Compliant Inner Backup 

Die, Outer or Lower Bending Will Forms 

Back/Bottom Up 90° 

• Station #75 - Accumulate & Cross 

Transfer to Main Line: Accumulate 

Completed Assemblies & Load 

Back/Bottom onto Shuttle Rails, Locate 

& Clamp 

• Station #85 - Overhead Offline Dual 

Rail Shuttle System 


Cabinet Line High Section or Final Assembly) 

• Station #70 - U-Fold & Partial Crimp Wrapper 

Back/Bottom Panel & Clinch Bottom Flanges 

(6) Places Both Sides 

• Station #80 - Final Crimp Cabinet to Back/ 

Bottom Assembly & Finish Crimp Side 

Flanges to Wrapper: Clamp & Positioning 

• Station #90 - Load & Fasten With Adhesive 

Upper Corner Reinforcement Bracket 

• Station #100 - Load & Pierce Rivet LH & RH 

Tapping Plates to Cabinet 

• Station #110 - Load & Weld Center Mullion & 

Lower Face Plate Reinforcement Bars 

• Station #120 - Load & Rivet Center Mullion & 

Lower Face Plate Cover 

• Station #130 - Clinch Back/Bottom to Faceplate 

(6) Places & Rivet Tapping Plate to Wrapper 

• Station #140 - Automatic Unload Elevator 

• Station #150 - Dual Rail Compensating/ 

Reciprocating Shuttle Conveyor 

• Controls: Line Contains (4) Sections or Lines of 

Equipment, Fully Integrated to Operate as a 

Single System, Allen-Bradley PLC-5 & SLC-5 

Series Programmable Controllers, PC Interface 

To view video plant tours, 

please visit www.dovebid.com 


(3) 

TAYLOR-WINFIELD 

AUTOMATIC 

REFRIGERATOR 

DOOR 

FABRICATION & 

WELDING LINES 

(4) Refrigerator Door Fabrication & Welding Lines 

(1) TANGENT BENDING, S/N 950072 (1996), Door Width 12" to 36”, Max. Return Flange Width 1", Door Height 16" 

to 72”, Door Depth 1" to 4”, Cycle Time 15 Seconds (For 2" Door Thickness), Semi-Auto. Change-Over, 

Consisting of: 

• Station #1: Slat Type Entry Conveyor With Stack 

Positioner, Overhead Traverse Type Vacuum Sheet 

Destacker, With Air Blow-Off System, Dual Sheet 

Detector & Sheet Separator, Sheet Lubrication, 

• Station #2: Idle Station With Part Support Table, 

Shuttle Beam Transfer 

• Station #3 & #4: Hydraulic Single Wing Tangent Return 

Flange Bender, Forms .090" Outside Radius Across 

Maximum Cross Section Width of 72", With Radius, 

Clamp & Rocker Die and Fixed Pin & Yoke Slip Plate 

Control, Overbend Adjustment 0° to 8° 

• Station #5 & #6: Hydraulic Single Wing Tangent Side 

Flange Bender, Forms .090" Outside Radius Across a 

Max. Cross Section Width 72", With Radius, Clamp & 

Rocker Die and Fixed Pin & Yoke Slip Plate Control 

• Station #7 & #8: Hydraulic Single Wing Tangent Side 

Flange Bender, Forms .095" Outside Radius Across 

Maximum Cross Section Width 72", With Radius, 

Clamp & Rocker Die and Fixed Pin & Yoke Slip Plate 

Control, Radius Die Includes Additional Index Fixture 

(Used to Retract Unit from Under Formed Edge) 

• Station #9: Air-Operated Lift, Rotate 90° & Shift Unit 

Orientation for Transfer to Next Workstation 

• Station #10 & #11: Model 48-SW Hydraulic Single 

Wing Return Flange Bender, Forms .090" Outside 

Radius Across Maximum Cross Section Width 36", 

With Radius, Clamp & Rocker Die and Fixed Pin & 

Yoke Slip Plate Control, Overbend Adjustment 0° to 8° 

• Station #12 & #13: Model 48-SW Hydraulic Single 

Wing Return Flange Bender, Forms .090" Outside 

Radius Across Maximum Cross Section Width of 36", 

With Radius, Clamp & Rocker Die and Fixed Pin & 

Yoke Slip Plate Control, Overbend Adjustment 0° to 8°, 

With Retractable Radius Die to Extend In and Out from 

Under Previously Formed Side Flanges 

• Station #15: Hydraulic 180° Turnover Station, Vacuum 

Lift & Carry Transfer & Turn Part Over, Placing Part 

Flange Side Down on Shuttle Load Station #16 

• Station #14 & 16: Idle Station (Required for Space) 

• Station #17: Load Shuttle & Idle Station, (For Transfer 

thru Final Welding Stations, Also Required to Provide 

Physical Space in Line) 

• Station #18, #19, #20 & #21: Combination Restrike & 

Spot Weld Unit, Hydraulic Adjustments to Accommodate 

Widths 16" to 72", Clamping, Welds Overlapping 

Flanges to Lock Corner Position, Followed by Resetting 

the Corner, 70kVA Spot Welder, Savair Air-Operated 

Welding Gun Per Head, Air-Cooled Welding Cables, 

Entron Electronic Welding Controls 

• Station #22, #23, #24 & #25: Robotic Plasma Arc 

Welding Unit, Runoff Weld on Return Flange of Approx. 

.188", Manually-Operated Air-Powered Adjustment, 

Plasma Units Include Fixed Copper Water-Cooled 

Backup Die, Pair of External Corner Clamp Dies, Savair 

Guns, Positioning by Robot, Yasnac Motoman Model 

K3S1 6-Axis Articulated Welding Robot, ERC Controller 

With CRT Display & Keyboard, Teach Pendant, Linear & 

Circular Interpolation, Thermal-Arc Model WC-100B 

Plasma Arc Welder, Miller Model XMT-300-CC 200-Amp 

Power Supply, Water-to-Air Heat Exchanger 

• Station #26: Lift & Carry Shuttle Type Transfer Station, 

With V-Guide Shuttle Rail 

• Station #1 thru #25: (2) Lift & Carry Type Conveyors 

• Unload Station: With Exit Belt Conveyor 

• Controls: Allen-Bradley Model 5/40 PLC Control, With 

Sequencing Through Central, Programmable, Solid- 

State Controllers; Operator Workstations at Each Work 

Area Include: Model 800-EM Illuminated Push Buttons & 

Individual Remote Model SLC-500 I/O Control Modules, 

Diagnostics, Gemco Digital Readouts 

(2) 2-SLIDE, (1) (1989), (1) (1987), 

Each With: 

• Station #1: Slat-Type Entry 

Conveyor With Stack Positioner, 

Overhead Traverse-Type Vacuum 

Sheet De-Stacker 

• Station #2: Idle Station With Part 

Support Table, Magnetic Shuttle 

Beam Transfer 

• Station #3 & 5: Hydraulic 2-Slide 

Edge Former Bender 

• Station #4: Idle Station (Required 

for Space in Line & Positioner) 

• Station #6: (2) Hydraulic 2-Slide 

Edge Former Benders 

• Station #7: Cantilever Arm Panel 

Turnover Station 

• Station #8, #9, #10 & #11: Corner 

Spot Weld Station (For Welding 

Overlapping Flanges to Lock 

Corner Position), 70kVA Spot 

Welder, Entron Welding Control 

• Station #12, #13, #14 & #15: 

Plasma Arc Welding Unit, Screw 

Drive Welding Head Positioning, 

Thermal-Arc Ultima Model 150 

Plasma Arc Welder 

• Station #16: Transfer Conveyor 

• Station #17: 4-Pierce Station, 

Manual Head Adjustment 

• Station #18: Thimble Insertion & 

Spot Welding Station, Manual Head 

Adj., Vib. Bowl Feeders 

• Hydraulic Screw Feed Adj. on 

Most Stations, Hyd. Systems, 

Allen-Bradley PLC Controls, With 

Allen-Bradley PanelView Interface 

2-SLIDE 

LINE 

STATION 

FORMING 

STATIONS 

2-SLIDE 

FINAL WELD 

STATIONS 

RWC REFRIGERATOR DOOR FORMING & WELDING LINE 

Consisting of: (2) 2-Slide Benders With Back Gage, (2) Corner Striker Stations, 2-Place Spot Weld With Entron Weld Control, Shadow Infrared Safety Curtain, 

70kVA Spot Welding Transformer, (2) Plasma Weld Stations With (2) Thermal-Arc Model 100B Plasma Arc Welders, Water Cooler, (2) Miller Model 300-CC 

DC Inverter Arc Welders, (2) Miller Model PC-300 GTAW Pulser Controls, Infrared Safety Curtain, Manual Screw Head Adjustment, PLC Controls, (2) 30kVA 

Thimble Spot Weld Stations With Weltronic Technitron Model WT-900 Controls, Digital Readout 5 


Slitting Line • Cut-To-Length & Notching Lines 

6 

1996 

STAMCO 10,000-LB. CAPACITY 60" SLITTING LINE 

BRADBURY AUTOMATIC CUT-TO-LENGTH & NOTCHING LINE 

ROWE 40" 20,000-LB. CAPACITY AUTOMATIC 

CUT-TO-LENGTH & NOTCHING LINE 

1996 

SLITTING LINE 

1 – STAMCO 10,000-LB. CAPACITY 60" SLITTING LINE, 


• 10,000-Lb. Capacity Hydraulic Uncoiler, 

S/N 2998-19141, With Maximum Coil OD 72", Maximum 

Stock Width 60", Mandrel Range 20" to 28" 

• 60" Slitter, With Entry Pinch Rolls, Mayfran Chip-Tote 

Inclined Scrap Conveyor, Operator Pedestal, Rewinder 

• Model V3-Way Coil Handler 

CUT-TO-LENGTH & NOTCHING 

LINES 

1 – BRADBURY AUTOMATIC CUT-TO-LENGTH & 

NOTCHING LINE, (1996), Consisting of: 

• 20,000-Lb. Capacity Self-Aligning Coil Car, Minimum 

Coil Width 12" 

• Model SR-20DE 20,000-Lb. 2-Station Rotary 

Uncoiler, S/N 29832 (1996), Maximum Coil OD 72" 

(183cm), Maximum Coil Width 48" (122cm), Mandrel 

Expansion Range 18.5" to 24.5" (47cm to 62cm), 7.5-HP 

Hydraulic System 

• Hydraulic Threading Table, S/N 29832 

• 48" 5-Roll Leveler, S/N 29833 

• 48" Edge Trimmer, S/N 29834, With Steel-Trak 

Inclined Scrap Conveyor 

• Feed Roll Stand, S/N 29837 

• 96" Cut-to-Length Shear, With Dual-Die Quick 

Change System 

• Transfer Conveyor & Vacuum Stacker, Pallet 

Transfer Conveyor 

• Allen-Bradley PanelView Interface, Operator Console, 

Hydraulic Systems 

2 – ROWE 40" 20,000-LB. CAPACITY AUTOMATIC 

CUT-TO-LENGTH & NOTCHING LINES, 

(1) (1996), Consisting of: 

• Model 20040-DVS-200 20,000-Lb. Capacity Uncoiler, 

S/N 28782, Maximum OD 60", Maximum Width 40" 

• Model BGY-2024 20,000-Lb. Capacity Coil Car, 

S/N 28781 

• Hydraulic Tilt Threading Table 

• Model V4-40 7-Roll Leveler, S/N 28784, Maximum 

Width 40", Thickness Range .020" to .110", 

• Model VMLA-42/7 10-Roll Precision Leveler, 

S/N 28785, Maximum Width 40", Thickness Range .012" 

to .016" 

• Model PTD-40 40" Hydraulic Threading Table, 

S/N 28786 

• Wysong 40" Cut-to-Length Shear 

• Gravity Roller Transfer Conveyor 

• Stock Stop Roll Stand 

• 10-Station Notcher, With Allen-Bradley PanelView 

Model 550 Interface 

• Right-Hand Scissor-Lift Sheet Stacker 

• Hydraulic Systems, PLC Controls, Video Monitors, 

(1) (1989), Consisting of: 

• Model 20050-DVS-200 20,000-Lb. Capacity Uncoiler, 

S/N 27258, Maximum OD 60", Maximum Width 50" 

• Model BGY-2024 20,000-Lb. Coil Car 

• Hydraulic Tilt Threading Table 

• Model C4-50 7-Roll Leveler, S/N 27160, Maximum 

Width 50", Thickness Range .016" to .060" 

• Herr-Voss Keystone Model RH60/1.156-19/9 6-HI 

7-Roll Leveler, S/N 2160 (1996), Maximum Width 50", 

Thickness Range .016" to .060", Speed 150 FPM 

• 50" Hydraulic Threading Table 

• Niagara Model 1R-R-10-GA 40" X 10-GA 

Cut-to-Length Shear, S/N S65506 (1996), Indramat 

Podium Control, -Gravity Roller Transfer Conveyor 

• 10-Station Notcher, With Allen-Bradley PanelView 

Model 550 Interface 

• Left-Hand Jack Type Sheet Stacker 

• Hydraulic Systems, PLC Controls, Video Monitors 


Roll Forming Line • Punch, Trim, Form & Welding Lines 

NIAGARA MODEL M-45-OBS 

50-TON STRAIGHT SIDE PRESS 

YODER MODEL QVM-150 16-STAND 

ROLL FORMING MACHINE 

YODER ROLL FORMING LINE 

(Line to be offered in bulk, subject to the piecemeal bids), Consisting of: 

• CWP MODEL 4R-18 8000-LB. CAPACITY EXPANDING MANDREL UNCOILER, 

S/N 19663, Maximum Coil OD 60", Maximum Stock Width 18", Mandrel Range 13" to 21", With Coil Car 

• STRIP END DETECTION STAND 

• KENT MODEL 16-125 RMA-4 SHEAR & END TIG WLEDER, Maximum Strip Width 12”, Maximum Strip 

Thickness .065”, Square-Type End Cut, With Miller Econo Twin HF Constant Current AC/DC Arc Welding 

Power Source, S/N JH274982 

• ROWE MODEL B-20 STOCK STRAIGHTENER, S/N R29232, Right-to-Left, Maximum Stock Width 20", 

Stock Thickness .020 to .105 Mild Steel, Speeds 10 to 160 FAM IPM 

• ROWE MODEL RM-FAC-083220 FEEDER, 

S/N R29232SEP, Maximum Stock Width 20", Stock Thickness .010 to .135 Mild Steel, Machine Direction 

Right-to-Left, Speed 0 to 300 FAM IPM, Pass Line 42" 

• NIAGARA MODEL SC2-125-60-30 125-TON STRAIGHT SIDE PRESS, S/N P53007 (#144), Bed Size 

60"LR X 30"FB, Ram Size 60"LR X 30"FB, Stroke 3", Shut Height 22.5", Slide Adjustment 7", Speed 80 

SPM, Motorized Ram Adjustment, Air Clutch & Counterbalance, Lubrication 

• (2) MAYFRAN CHIP-TOTE 18" POWER INCLINE SCRAP CONVEYORS, S/Ns 89408, 89407, 

1/2-HP Motor 

• SONA-TROL PRE-NOTCH EXIT LOOP SENSING & CONTROL SYSTEM 

• YODER MODEL QVM-150 16-STAND ROLL FORMING MACHINE, S/N Y8053-988, Roll Shaft Diameter 

1-1/2”, Roll Space 8”, Horizontal Centers 11”, Vertical Centers 4” to 7”, Speed 100 FPM, Quick Disconnect 

Universal Shafts, Removable Rafts, Weldotron RPL II Sensing Safety Light Curtain 

• NIAGARA MODEL M-45-OBS 50-TON STRAIGHT SIDE PRESS, S/N P52792, Bed Size 28"LR X 18"FB, 

Ram Size 18" X 24", Stroke 3.5", Shut Height 12", Slide Adjustment 2.62", Speed 110 SPM, Air Clutch & 

Counterbalance, Bijur Lubrication, Palm Button Control 

• POWER-PACK MODEL 10-H-12 12"W X 10'L POWER EXIT BELT CONVEYOR, S/N 5805 

• TRAVELING A-FRAME GANTRY CRANE SYSTEM, With 2-Ton Capacity Chain Hoist, 

6-Way Pendant Control, Floor Rail 

YODER ROLL FORMING LINE 

NIAGARA MODEL SC2-125-60-30 

125-TON STRAIGHT SIDE PRESS 

1997 

TUBE STRAIGHTENING & 

CUT-TO-LENGTH LINES 

1 – J & B MODEL RFP TUBE STRAIGHTENING & 

CUT-TO-LENGTH MACHINE, S/N 96016, Model 

18HAP Dual 9-Roll Straighteners, Hydraulic Magazine 

Stock Table, Wing Bender, Eye-to-Sky Uncoiler 

1 – BURR OAK COPPER TUBE STRAIGHTENING & 

CUT-TO-LENGTH LINE, Dual Decoiler, Model DT- 

PTS-M2-14 Straightener, Model DSHF-M1-34 

Cut-to-Length Machine, With Run-Out Trays 

GMT DUAL 10-STATION AUTOMATIC 

PUNCH, TRIM, FORM & WELDING LINE 

J & B MODEL RFP TUBE STRAIGHTENING 

& CUT-TO-LENGTH MACHINE 

(2) GMT DUAL 10-STATION AUTOMATIC PUNCH, 

TRIM, FORM & WELDING LINES, (1997) & (1998) 

Consisting of: Destacker Station, Shear Station, 

(2) Punch Stations, (2) Rollover Stations, (2) Punch Stations, (2) Welding Stations, (2) Forming 

Stations, Runout Conveyor, Entron Model EN1000 Digital Welding Control 

BURR OAK COPPER TUBE STRAIGHTENING 

& CUT-TO-LENGTH LINE 

7 


Straight Side Presses • OBI Press • Stock Leveler 

VERSON 350-S2-84T 350-TON 

2-POINT STRAIGHT SIDE PRESS 

VERSON 200-S4-108T 200-TON 


VERSON MODEL 300-S2-72T 300-TON 


VERSON MODEL 200-S2-96T 200-TON 


(10) STRAIGHT SIDE PRESSES 

2 – VERSON MODEL 350-S2-84T 350-TON 2-POINT 

STRAIGHT SIDE PRESSES, S/Ns 8528 (#111), 8526 

(#109), Bed Size 84"LR X 52"FB, Stroke 12", Shut 

Height 30", Slide Adjustment 10", Speed 12 SPM, 

Bolster Thickness 6", Windows 18", Air Clutch, Air 

Counterbalance, Air Brake, Lubrication, Palm Button 

Controls 


STRAIGHT SIDE PRESSES, 

S/N 8534 (#101) With Stroke 14", Speed 12 SPM, 

Bolster Thickness 6", Windows 19", 

S/N 8519 (#119) With Stroke 12", Speeds 40 to 80 

SPM, Bolster Thickness 4", Windows 20", 

Both With Bed Size 72"LR X 48"FB, Shut Height 26", 

Slide Adjustment 10", Air Clutch, Air Counterbalance, 

Air Brake, Lubrication, Palm Button Controls 

1 – VERSON MODEL 200-S4-108T 200-TON 

4-POINT STRAIGHT SIDE PRESS, S/N 8521 (#118), 

Bed Size 108"LR X 54"FB, Stroke 14”, Shut Height 

23", Slide Adjustment 7", Speed 12 SPM, Bolster 

Thickness 5", Windows 14", Air Clutch, Air 

Counterbalance, Air Brake, Lubrication, Palm Button 

Controls 

1 – VERSON MODEL 200-S2-120T 200-TON 

2-POINT STRAIGHT SIDE PRESS, S/N 8524 (#108), 

Bed Size 120"LR X 48"FB, Stroke 12", Shut Height 

23", Slide Adjustment 10", Speed 12 SPM, Bolster 

Thickness 5", Air Clutch, Air Counterbalance, Air 

Brake, Lubrication, Palm Button Controls 


STRAIGHT SIDE PRESSES, 

S/N 8518 (#116) With Bed Size 96"LR X 72"FB, Stroke 

14", Shut Height 29", Slide Adjustment 10", Speed 12 

SPM, Windows 20", Air Brake, 

S/N 10968 (#134), Bed Size 96"LR X 60"FB, Stroke 

12", Shut Height 27", Slide Adjustment 12", Speed 16 

SPM 

Both With Bolster Thickness 5", Air Clutch, Air 

Counterbalance, Lubrication, Palm Button Controls, 


STRAIGHT SIDE PRESS, S/N 8522 (#107), Bed Size 

72"LR X 48"FB, Stroke 12", Shut Height 24", Slide 

Adjustment 12", Speed 12 SPM, Bolster Thickness 5", 

Air Clutch, Air Brake, Lubrication, Palm Button Controls 

1 – AIDA MODEL NC2-160(2) 160-TON DOUBLE- 

CRANK GAP FRAME STRAIGHT SIDE PRESS, S/N 

10516-1348 (1989) (#125), Capacity: 160-T, 176-US, 

Blanking Capacity: 123-TF, 141-US, Bed Size 80.3"LR 

X 29.9"FB, Ram Size 59"LR X 22.8"FB, Stroke 7.87", 

Die Height 17.7", Slide Adjustment 39.3", Speeds 30 to 

55 SPM, 20-HP Motor, Automatic Ejector Timing 

Switch, Safety Switches, Lubrication, Pedestal Control 

OBI PRESS 

1 – VERSON MODEL 7-1/2 105-TON OBI PRESS, S/N 

10101 (#131), Bed Size 39"LR X 30"FB, Stroke 8", 

Shut Height 18", Slide Adjustment 4", Speed 46 SPM, 

Bolster Thickness 4", Air Clutch, Lubrication, Palm 

Button Controls 

UNCOILER 

1 – ROWE 10,000-LB. CAPACITY UNCOILER, Maximum 

Coil OD 72", Maximum Stock Width 48" 

STOCK LEVELER 

1 – AETNA-STANDARD 54" STOCK LEVELER, 

S/N 72815, With Individual Roll Adjustment 

8 

VERSON MODEL 7-1/2 105-TON 

OBI PRESS 

1989 

AIDA MODEL NC2-160(2) 160-TON 

DOUBLE-CRANK GAP FRAME 

STRAIGHT SIDE PRESS 

@ 

See us on the web 

www.dovebid.com 


Fabricating • Soldering • Welding Equipment 

WARNER & SWASEY WIEDEMATIC MODEL W-2040 CNC TURRET PUNCH 

CINCINNATI MODEL 1008 8' X 10-GA POWER SQUARING SHEAR 

CINCINNATI AUTO-SHEAR MODEL 1006 6’ X 3/16" 

POWER SQUARING SHEAR 

RWC QUAD-STATION HEAVY BRACE 

AUTOMATED RESISTANCE SPOT WELDER 

VERSON MODEL B-710 150-TON 

PRESS BRAKE 

CNC TURRET PUNCH 

1 – WARNER & SWASEY WIEDEMATIC MODEL 

W-2040 CNC TURRET PUNCH, S/N N/A, 24-Station 

Turret, Mach-II Sheet Positioner, CNC Control 

PRESS BRAKE 

1 – VERSON MODEL B-710 150-TON PRESS BRAKE, 

S/N 10098 (#211), Bed Size 120" X 22", Distance 

Between Housings 125", Throat 12", Stroke 6", Shut 

Height 16", Slide Adjustment 5", Speed 30 SPM, Air 

Clutch, Lubrication, Palm Button Controls 

SHEARS 

3 – CINCINNATI POWER SQUARING SHEARS, 

(1) MODEL 1014 12' X 12-GA, S/N 23981, 

(1) MODEL 1008 8' X 10-GA, S/N 35825, With 36" 

Front-Operated Back Gage, Madison-Kipp 

Lubrication, 

(1) AUTO-SHEAR MODEL 1006 6’ X 3/16", 

S/N 26K96, With 24" Front-Operated Back Gage, 6' 

Squaring Arm, Madison-Kipp Lubrication, 

All With Hydraulic Holdowns 

1 – DAYTON 52" FOOT-OPERATED SHEAR, With 

Back Gage 

FABRICATING EQUIPMENT 

1 – LOCKFORMER 22-GA LOCKFORMING MACHINE, 

S/N 2540 

1 – PEDESTAL SCROLL BENDER 

1 – BEVERLY NO. B2 6" LEVER-OPERATED 

PEDESTAL SHEAR 

1 – HECK TRACE-A-PUNCH, S/N 78303 

COPPER TUBE GAS 

SOLDERING MACHINES 

3 – AUTOMATIC COPPER TUBE GAS SOLDERING 

MACHINES, (2) 1/4", (1) 5/16", Infeed Table, Feed 

Rolls, Stainless Steel Fume Exhaust Hood, Run-Out 

Table 

WELDING ROBOTS 

2 – FANUC WELDING ROBOTS, 

(1) ARC-MATE MODEL 100I, With System R-J2 

Control, 

(1) MODEL N/A, With Fanuc System R-J3 Control, 

Fanuc Arc-Mate Model 50I/L Welding Robot, 

Pendant Control, Lincoln Model CV-400 Welding 

Power Supply, Model LN-10 Wire Feeder 

SPOT WELDERS 

1 – RWC QUAD-STATION HEAVY BRACE 

AUTOMATED RESISTANCE SPOT WELDER, 

S/N 8449, Allen-Bradley Dataliner PLC Control With 

Digital Readout, Shadow-5 Infrared Safety Curtain, 

Palm Button Control 

2 – TAYLOR-WINFIELD TYPE ENB-18-75AIR-OPER 

75KVA WATER-COOLED PRESS-TYPE 

RESISTANCE SPOT WELDERS, 

S/N 56246 With 24" Throat X 8" Gap 

S/N 56246, 52408 With 12" Throat X 8" Gap, 

Both With 440-Volts, Entron Welding Control 

2 – TAYLOR WINFIELD MODEL 613-442 75KVA 

WATER-COOLED PRESS-TYPE RESISTANCE 

SPOT WELDERS 

FANUC ARC-MATE MODEL 

100I WELDING ROBOT 

To view 

video plant tours, 

please visit 


9 


Dual-Tub Inline Thermoforming Lines • Rotary Thermoformers 

1997 

THERMOFORMING STATION 

TRIM STATION 

DESTACKER 

(2) DETROIT SERIES SUPER LINE NEW GENERATION AUTOMATIC DUAL-TUB 

INLINE THERMOFORMING LINES, (BOTH 1997) 

Maximum Thickness 8mm, Sheet-Fed, Fully Automatic & Continuous, Hydraulic Without Pit, Consisting of: 

• 2-Station Vacuum Sheet Destacker, Vacuum Transfer, Load Station, Sheet Separator, 

(2) Sheet Cart Stations, 

• Inline Shuttle Transfer System, Gripper Pliers for Each Operating Station, Transfer 

Supporting Shoulders & Pliers Width are Adjustable for Various Sheet Sizes, Gear/Rack Drive 

• Electric Ceramic Infrared Preheat Oven Station, Top & Bottom Heat With Parabolic 

Reflectors, Universal Reduction Clamp Frames With Gripper Pliers, Independently Adjustable 

Transversal Bars 

• Electric Ceramic Infrared Final Oven Station, Top & Bottom Heat With Parabolic Reflectors, 

Universal Reduction Clamp Frames With Gripper Pliers, Independently Adjustable Transversal 

Bars 

• Dual Tub Vacuum Thermoforming Station, With Tub Splitter, Upper Moving Platen Pre- 

Stretching Balloon Bell, (3) Programmable Balloon Heights, Forced Air Cooling, (4) Conair- 

Tempo Mold Temperature Controls 

• Vacuum Overarm Lift Transfer System 

• (2) Rotary Trim Systems, With Traveling Indexing 

Fixtures & Trim Shear 

• Exit Conveyor 

• Vacuum & Hydraulic Systems, Chiller & Cooling 

Tower, 

• Control Systems, Including: Allen-Bradley 

PLC-5/40 Control, Operator Interface With Personal 

Computer, I/O Modules & Receivers, Proportional 

Valves, Linear Potentiometers & Temperature Sensors, 

Constant Voltage Transformer, Operator Station 

BROWN MACHINE MODEL 244 4-STATION DIAL INDEX ROTARY 

THERMOFORMING MACHINE 

BROWN MACHINE MODEL 233 3-STATION DIAL INDEX ROTARY 

THERMOFORMING MACHINE 

DIAL INDEX ROTARY THERMOFORMERS 

8 – BROWN MACHINE DIAL INDEX ROTARY THERMOFORMING MACHINES, 

(4) MODEL 244 4-STATION, S/Ns 6158 (#13), 6159 (#14), 6161 (#15), 11952 (#16), 

(4) MODEL 233 3-STATION, S/Ns 5372 (#6), 6160 (#3), 441 (#8), N/A (#4), All With Maximum Sheet Panel Size 4' X 7', Upper Platen Stroke 42" Pre- 

Draw, Back Billow Platen, Load/Unload Station, Cal Rod Preheat Station, Ceramic Final Heat Station, Vacuum Forming Station, Hydraulic System, 

Updated PLC Controls, Operators Pedestal 

10 


Plastics, Piercing & Trim Equipment 

PRODEX TORQUEMASTER 6" 

PLASTIC EXTRUDER 

54" PINCH ROLL STAND AND MODEL SH18-53 

WATER-COOLED 3-DRUM ROLL STAND 

PRODEX TORQUEMASTER 54" PLASTIC SHEET 

EXTRUSION & CUT-TO-LENGTH LINE 


• Prodex Torquemaster 6" Plastic Extruder, L/D Ratio 32:1 

• Lufkin Size DF340S Gear Drive, S/N 106, 349-HP, Input 1690 RPM, Ratio 81.20:1 

• 54" Sheet Head Die 

• Model SH18-53 Water-Cooled 3-Drum Roll Stand, S/N P-186 

WYSONG MODEL 14-54 54" X 14-GA 

POWER SQUARING SHEAR 

• (3) Barber-Colman Digital Temperature Controls 

• Thickness Gage 

• 54" Pinch Roll Stand (Rubber Rolls) 

• Wysong Model 14-54 54" X 14-Ga Power Squaring Shear 

• Model 684-42 11' Dual Belt Exit Conveyor 

• Sheet Stacker, S/N 0001E-1 

EXTRUSION LINES 

2 – NRM PIECEMAKER III EXTRUSION LINES, 

S/Ns 15712 & 15705, Both 32:1 L/D, With 

Hesston Screen Changer, Welex Gear 

Pump, 3-Roll (20") Cooling Stand, Wysong 

1452 Shear, Stacking Fork System 

PIERCING MACHINES 

4 – DETROIT TOOL & ENGINEERING LINER 

PIERCING MACHINES, S/Ns N/A, (For 

Piercing Various Locations in Refrigerator 

Liners), 

(2) FRESH FOOD, (#1) (#2) (BOTH 1996), 

Consisting of: Manual Load Station, 

Overhead Transfer, Center Post Piercing 

Station, 10-HP Hydraulic Unit 

(2) FREEZER, (#3), (#4) (BOTH 1996), 

Consisting of: Load Station, Dual Tandem 

Overhead Transfer System, (2) Piercing 

Stations, Idle Station, 15-HP Hydraulic Unit, 

Both with Capacity 15, 17, 18, 20, 23 & 25 

Cu Ft Liners, Unload Station, Allen-Bradley 

SLC-5 Programmable Controls, 

Allen-Bradley PanelView 550 Display, 

2 – WILLIAMS & WHITE 25-TON PIERCING 

PRESSES, (1997) (#15) 

PLASTIC INJECTION 

MOLDING MACHINE 

1 – ARBURG ALLROUNDER MODEL 320-S 

500-150 32-TON ROTARY SCREW 

PLASTIC INJECTION MOLDING 

MACHINE, S/N 109571 (1997), Platen Size 

19"LR X 18.5"TB, Hopper Loader 

TRIM PRESSES 

4 – JARECKI 200-TON 4-POST HYDRAULIC 

TRIM PRESSES, 

(2) MODEL HMD-200-96-60, (#15), (#16), 

Bed Size 96"LR X 60"FB, Max. Daylight 60", 

(2) MODEL HMU-200-96-48, S/Ns 63 (#1), 

113 (#8), Bed Size 96"LR X 48"FB, 

Maximum Daylight 32", 

Both With Shut Height 18.25", Hydraulic 

System, Palm Button Controls 

DETROIT TOOL & ENGINEERING FRESH FOOD 

REFRIGERATOR LINER PIERCING MACHINE 

JARECKI MODEL HMU-200-96-48 200-TON 

4-POST HYDRAULIC TRIM PRESSES 

1996 

DETROIT TOOL & ENGINEERING FRESH FOOD 

FREEZER LINER PIERCING MACHINE 

1997 

ARBURG ALLROUNDER MODEL 320-S 

500-150 32-TON ROTARY SCREW 

PLASTIC INJECTION MOLDING MACHINE 

11 


Foam Machine & Systems • Laminating Line • Ancillary 

KOMO 12-STATION MICROPROCESSOR-CONTROLLED 

DIAL INDEX DOOR FOAM MACHINE 

CANNON MICROPROCESSOR-CONTROLLED 

CONTINUOUS FOAM LAMINATING LINE 

1997 

CANNON-USA 16-STATION AUTOMATIC 

CABINET FOAMING SYSTEM 

UNA-DYN 1M2 BLENDER 

DIAL INDEX DOOR FOAM MACHINE 

1 – KOMO 12-STATION MICROPROCESSOR-CONTROLLED DIAL INDEX DOOR FOAM 

MACHINE, S/N 16635-01-00-96, Will Accommodate Flat Foam or Counter Depth Foam, Each 

Station With its Own Recipe, Microprocessor Reads Every Station, Up-Acting Bed, Swing-Down 

Top, Vacuum Parts Lifter, Magnetic & Vacuum Load Station, (2) Mixing Heads, (2) Pouring 

Systems, Unload Station, (2) Stations With Thermolator Temperature Controls, (2) Sterltronic 

Sterlco Temperature Controls, Foam Cures During Table Rotation, Microprocessor Control 

CABINET FOAMING SYSTEMS, 

2 – CANNON-USA AUTOMATIC CABINET FOAMING SYSTEMS, 

(1) 16-STATION, (1997) (LINE #1), Consisting of: 

• (16) Pre-Heat Ovens 

• (16) Foaming Stations, With Down-Acting Roto-Plug Foam Fixtures 

• (3) Chemical Wet Systems, (Converted to HFC245fa Blowing Agent 2002), Capacity 

Approximately 400-Lbs./min @ 1:1 Ratio 

• Sentra Advantage Model LE2000 Temperature Control 

• (3) Calibration Stations 

• Pumps, Day Tanks, Roller Conveyor System, (3) Athena PLC Controllers, Allen-Bradley 

PanelView Interface, Toledo Digital Scale, Allen-Bradley Model 1336-Plus-II Sensorless Vector 

Controls, 

(1) 10-STATION, (1989) (LINE #5), Consisting of: 

• (10) Preheat Ovens 

• (10) Foaming Stations, With Down-Acting Roto-Plug Foam Fixtures 

• (3) Chemical Wet Systems, (Converted to HFC245fa Blowing Agent), Capacity Approx. 

400-Lbs./min @ 1:1 Ratio, Sentra Advantage LE2000 Temperature Control, Calibration Station 

• Pumps, Day Tanks, Roller Conveyor System, (2) PLC Controllers, Allen-Bradley PanelView 

Interface 

12 

FOAM LAMINATING LINE 

1 – CANNON MICROPROCESSOR-CONTROLLED 

CONTINUOUS FOAM LAMINATING LINE, 

Consisting of: Entry Power Roller Conveyor, 

Allen-Bradley Digital Speed Control, Laminator 

Entry Conveyor, Cannon Pre-Heat Electric Oven, 

(2) PC-Controlled Traveling Foam Heads, 110'L 

Gas-Fired Hot Air Curing Oven, Top Half of Oven 

Lifts for Different Thickness, Wet System, 

Calibration Station, ISO & Polyol Storage Tanks, 

(3) Operator Stations, Pendant Head Control, 

Gas-Fired Furnace, Upper Conveyor of 

Laminator Plastic, Sonic Seamer, (3) Manual 

Control Stations, Deionizers 

HOPPER & BLENDER 

1 – INGERSOLL-RAND L-R 5,000-LBS./HR 

GRINDER EVACUATION SYSTEM, With 

10,000-Lb. Hopper 

1 – UNA-DYN MODEL 1M2 BLENDER, Eriez 

Magnetic Conveyor, (2) Tanks, Hopper Loaders, 

Scale 

GRANULATORS 

2 – CUMBERLAND MODEL 50B PLASTIC 

GRANULATORS, (1) 125-HP, (1989), With 

3-Knife High Shear Rotor, (1) 100-HP, (1989), 

With 5-Knife High Rotor 


Central Vacuum Systems • Silos • Toolroom Equipment 

MONARCH MODEL 10EE 10" X 20" C.C. QUICK 

CHANGE GEARED HEAD LATHE 

CENTRAL VACUUM 

SYSTEMS 

2 – TRAVAUNI CENTRAL VACUUM SYSTEMS, 

(BOTH 2002), (1) With (6) Model TRVA 65-300 

Water Ring Pumps, (1) With (4) Model TRVA 

65-300 Water Ring Pumps 

RAW MATERIAL 

STORAGE SILOS 

5 – SCHULD MODEL 45-40-12X33 1320-CU FT 

RAW MATERIAL STORAGE SILOS, S/Ns 48526, 

(4) N/A, Size 12' Diameter X 33’H, 75-Ton @ 40- 

Lbs., 20" Top Manholes, 8-Position 

2" Takeoff Box on Bottom With Rack & Pinion 

Slide Gate, Vacuum Pumping System 

CNC VERTICAL MILL 

1 – EAGLE 5-HP CNC VERTICAL MILLING 

MACHINE, S/N 908040194-7, With Table Size 12" 

X 38", Spindle Speeds 80 to 4000 RPM, Anilam 

Series 1400 CNC Control 

MILLING MACHINES 

1 – BRIDGEPORT 1-HP 8-SPEED VERTICAL 

MILLING MACHINE, S/N BR54111, Table Size 

9" X 32", Spindle Speeds 80 to 2720 RPM, 

Mitutoyo 2-Axis Digital Readout 

1 – CINCINNATI NO. 4 DIAL-TYPE HORIZONTAL 

MILLING MACHINE, S/N 4A4P5D-17, Table Size 

16" X 80", Spindle Speeds 16 to 1600 RPM, Feeds 

1/2 to 20 IPM, Acu-Rite 2-Axis Digital Readout, 

Pendant Control, With Universal Right Angle Milling 

Head 

1 – GREAVES HORIZONTAL MILLING MACHINE, 

Table Size 12" X 52.5", (18) Spindle Speeds 225 to 

180 RPM, 18 Feeds 1/2 to 30 IPM, With Right 

Angle Milling Head 

LATHES 

1 – HENDEY 16" X 42" C.C. QUICK CHANGE 

GEARED HEAD LATHE, S/N 37534H160, Actual 

Swing 18.5", (18) Spindle Speeds 10 to 652 RPM 

1 – SOUTH BEND NO. CL9187RB 10" X 36" C.C. 

TOOLROOM LATHE, S/N 23242R, (70) Feeds 

.0007 to .0836 IPR, (70) Threads 4 to 480 TPI, 

Taper Attachment, Thread Chasing Dial 

1 – MONARCH MODEL 10EE 10" X 20" C.C. QUICK 

CHANGE GEARED HEAD LATHE, S/N 10137, 

Actual Swing 12.5", Spindle Speeds 20 to 2500 

RPM, Taper Attachment, Thread Chasing Dial 

FOSDICK 4' X 11" COLUMN RADIAL DRILL 

GRINDERS 

1 – BOYAR-SCHULTZ NO. 2 PROFILE 

GRINDER, S/N 2774 

1 – F & M COMBINATION 10" DOUBLE-END 

PEDESTAL GRINDER/DRILL POINTER 

1 – VAN DORN 6" DOUBLE-END PEDESTAL 

GRINDER 

RADIAL DRILL 

1 – FOSDICK 4' X 11" COLUMN RADIAL 

DRILL, S/N 17540, Base Size 34" X 60", 

Spindle Speeds 75 to 1500 RPM, 24" X 18" 

X 21" Drill Table 

VERTICAL BAND SAW 

1 – TANNEWITZ 36" VERTICAL CONTOUR 

BAND SAW, Table Size 36" X 37.5", 10-HP 

Motor 

RADIAL ARM & TABLE 

SAWS 

1 – ROCKWELL 18-RAS 18" RADIAL ARM 

SAW, S/N GW9855 

1 – DEWALT BUILDERS 16" RADIAL ARM 

SAW 

1 – ROCKWELL/DELTA 12" UNIVERSAL 

RADIAL ARM SAW 

1 – 10" TILTING ARBOR TABLE SAW, 

(#1185), Table Size 43" X 36", Guide Fence 

MISCELLANEOUS 

MACHINERY 

1 – ALVA-ALLEN MODEL BT-5 5-TON OBI 

PRESS 

1 – FENN MODEL NF-2 BENCH-TOP 

SWEDGING MACHINE, S/N 3315 

1 – AIRCO AIRCOMATIC 3DVR-24B 300-AMP 

DC RECTIFIER WELDER, S/N P341437 

1 – MILLER MODEL S-54A CONSTANT WIRE 

FEEDER 

1 – SUNNEN MODEL 650 PRECISION 

HONING MACHINE 

1 – WALKER-TURNER V-RAM RADIAL 

DRILL 

2 – ETTCO MODEL ATU-5 LEAD SCREW 

TAPPING MACHINES, S/Ns 672, 667, With 

Maximum Stroke 5" 

1 – OLIVER DIE FILER 

EAGLE 5-HP CNC 

VERTICAL MILLING MACHINE 

INSPECTION 

EQUIPMENT 

1 – GRANITE 36" X 48" SURFACE 

PLATE 

1 – TRU-STONE GRANITE SURFACE 

PLATE, S/N 31110 

Cast Iron Surface Plates, Gear Tooth Pitch 

Gages, Dial Bore Gage, Dial Indicators, Etc. 

2002 

UNA-DYN DRYING HOPPER 


please visit 


13 


Lab & Test Equip. • Washing & Drying • Coating & Curing Lines 

1997 1997 

NORDSON TRIBOMATIC II POWDER COATING & CURING LINE 

LAB & TEST EQUIPMENT 

2 – RUSSELLS TECHNICAL PRODUCTS 

TEMPERATURE CONTROLLED WALK-IN 

MODULAR TEST CHAMBERS, (1) With 

Chamber Size 10' X 12' X 8-1/2’H, (1) 15' X 23' 

X 8-1/2’H 

1 – PRECISION ECONOMY TABLE-TOP LAB 

OVEN 

1 – CSC SCIENTIFIC CENCO MOISTURE 

BALANCE 

3 – SINGLETON SALT SPRAY CORROSION 

BATHS, (2) MODEL 23 50" X 84" X 78", S/Ns 

22272, 22271, (1) MODEL 22 40" X 64" X 

56", S/N 22270 

1 – TINIUS-OLSEN 5000-LB. CAPACITY 

DIGITAL-TYPE LO-CAP UNIVERSAL 

TENSILE TESTER, With Reverse Load Cell 

1 – COULITER MODEL LS100 PARTICLE SIZE 

ANALYZER 

1 – MEECO MODEL W MOISTURE ANALYZER 

1 – BRINKMAN METROHM MODEL 737-KF 

COULOMETER 

1 – TINIUS-OLSEN UE-86 L MELT FLOW INDEX 

EXTRUSION PLASTOMETER 

1 – WILD HERRBRUGG STEREO ZOOM 

MICROSCOPE, with Olympus Highlight 

Model 2000 Fiber-Optic Illuminator 

1 – CARVER MODEL C 2-POST UP-ACTING 

LAB PRESS 

1 – BUEHLER ISOMET LOW SPEED SAW 

1 – AND MODEL ER-180A 180G GLASS- 

ENCLOSED BALANCE SCALE 

1 – LABCONCO 3’ FUME HOOD 

PRE-TREATMENT 

WASHING & DRYING 

LINES 

2 – CENTURY 9-STAGE FLAT PANEL IRON 

PHOSPHATE, CHROME SEAL SYSTEM 

PRE-TREATMENT WASHING & DRYING 

LINES, Line Speed 50 FPM, Consisting of: 

• Stainless Steel Washer With Soap Wash 

(Stations #1 & #2), Fresh Water Rinse 

(Stations #3 & #4), Phosphate (Station #5), 

Fresh Water Rinse (Stations #6 & #7), 

Chrome (Station #8), DI Water Rinse (Station 

#9), DI Water Rejuvenation System, 

• Herr 20'L Single-Pass Gas-Fired 

Convection Dryer, With 20'L Cooldown 

Section 

1 – 9-STAGE IRON PHOSPHATE, CHROME 

SEAL SYSTEM PRE-TREATMENT 

WASHING & DRYING LINE, Opening Size 

30" X 80", Consisting of: 

• Wash (Station #1), Fresh Water Rinse 

(Stations #2, #3 & #4), Phosphate (Station 

#5), Rinse (Station #6), Chrome Seal (Station 

#7), DI Water Rinse (Station #8), Empty 

(Station #9), DI Water Rejuvenation System, 

• Single-Pass Gas-Fired Convection Dryer, 

With Cool Down Section 

WASHING & DRYING 

LINES 

1 – CONTINENTAL CONTINUOUS WASHING & 

DRYING LINE, (1988), Overall Length 

73-1/2’, Load Height 3-1/2', Time Cycles: 

Wash 60 Minutes, Rinse 30 Minutes, Dry 180 

Minutes, Consisting of: 

• 2-Stage Continuous Belt Washer, S/N 

PW88-FB181, With Opening Size 60" X 14", 

Length 24', Nylon Mesh Conveyor Belt 

• Continuous Gas-Fired Dryer, S/N PW88- 

D-182, With Length 24' 

1 – CONTINENTAL CONTINUOUS ROTARY 

DRUM WASHING & DRYING LINE, 

Consisting of: (1) Continuous Gas-Fired 

Rotary Drum Combination Washer & Dryer, 

S/N PW88DM180 (A88734-1), (3) Cycle 

Timers, Oil Skimmer, Jorgensen Inclined Slat 

Conveyor 

POWDER COATING & 

CURING LINES 

2 – NORDSON TRIBOMATIC II 

POWDER COATING & CURING 

LINES, (BOTH 1997), Line Speed 50 

FPM, Consisting of: 

• (3) Nordson Horizon 12-Gun 

Portable Downdraft Powder 

Coating Booths, With (2) Smart- 

Coat Powder Spray Controllers, 

(7) Tribomatic-II Gun Controls, Fire 

Detection System Controller, Vac-U- 

Max Vacuum System, Xycom SVGA 

Color Monitor, Hopper Tilting Unit, 

(2) With Versa-Spray Powder Spray 

Guns, (1) With Model 100+ Powder 

Spray Guns 

• Herr 115'L Infrared Curing Oven, 

Speed 50 FPM, 70'L 2-Zone 

Cooldown Section, Sheet Stacker, Exit 

Conveyor 

• Mentor AGV Model 34400 Laser- 

Controlled Booth Mover, Maximum 

Lift 12", Capacity 18,500-Lbs., Speed 

80 FPM 

1 – NORDSON POWDER COATING & 

CURING LINE, (1991), Line Speed 40 

FPM, Consisting of: 

• (3) Nordson Horizon 12-Gun 

Portable Down Draft Powder Coat 

Booths, (2) Oscillating Tree Towers, 

(2) Smart-Coat Spray Controllers, 

Tribomatic-II Gun Controls, Fire 

Detection System Controller, Vac-U- 

Max Vacuum System, Hopper Tilting 

Unit, (2) Rotary Sieves, Powder 

Recovery System, Valve Station, 

Color Hoppers, (1) With Versa-Spray 

Spray Guns, (2) With Model 100+ 

Spray Guns 

• Infrared Curing Oven, With 2-Zone 

Cool Down Section 

• 3000' Overhead Conveyor System, 

With Take-Up Station, Grease Station, 

(30) Turns, Hooks on 48" Centers, 

Barber-Colman PLC Control 

14 

COULITER MODEL LS100 

PARTICLE SIZE ANALYZER 


Cranes • Unloader • Trailers • Tanks • Print & Misc. Equipment 

1996 

DESHAZO 10-TON CAPACITY RADIO-CONTROLLED DOUBLE-GIRDER 

TRAVELING BRIDGE CRANE 

POLYOL STORAGE TANK 

BRIDGE CRANES 

2 – DESHAZO 10-TON CAPACITY RADIO- 

CONTROLLED DOUBLE-GIRDER 

TRAVELING BRIDGE CRANES, 

S/N N/A (1996) With Span 51'7", Runway 

199'11", 

S/N 11930 (1996) With Span 36'8", 

Runway 118'1" 

3 – 10-TON CAPACITY DOUBLE-GIRDER 

TRAVELING BRIDGE CRANES, 

(1) ABELL-HOWE, With Span 51'1", 

Runway 718'4", Pendant Control, 

(1) ILLINOIS, S/N 900722-1, With Span 

51'1", Runway 718'4", Pendant Control, 

(1) DEMAG, S/N 74001 

1 – FREE-STANDING 2-TON CAPACITY 

TRAVELING BRIDGE CRANE SYSTEM, 

With (5) 2-Ton Capacity Single-Girder 

Bridges, 100' Runway 

1 – CONTRX 16' PORTABLE A-FRAME 

GANTRY CRANE, With Jet 2-Ton 

Capacity Electric Chain Hoist 

JIB & GANTRY CRANES 

3 – 360° FREE-STANDING JIB CRANES, 

(1) SPANCO 3-TON CAPACITY, (1) 3-TON 

CAPACITY, (1) INDUSTRIAL 1-TON 

CAPACITY 

1 – SPANCO 2-TON CAPACITY PORTABLE 

A-FRAME GANTRY CRANE, With Coffing 

2-Ton Capacity Electric Chain Hoist 

RAILCAR UNLOADER 

1 – SPROUT-WALDRON 5000-LBS./HR 

VACUUM-BLOW RAILCAR UNLOADER, 

4" Diameter Material Lines, 40-HP Twin 

Vacuum Pump, (2) Roots 20-HP Vacuum 

Pumps, (2) Power Rotary Valves 

ILLINOIS 10-TON CAPACITY DOUBLE-GIRDER 

TRAVELING BRIDGE CRANE 

HIGHWAY TRAILERS 

3 – 48' TANDEM-AXLE VAN BODY HIGHWAY 

TRAILERS, (1) (1984) 

(26) TANKS 

4 – 60,000-LB. CAPACITY REFRIGERANT 

STORAGE TANKS, 

(2) With Size 6' Diameter X 30', 

(2) With Size 6' Diameter X 25' 

3 – MDI REFRIGERANT STORAGE TANKS, 

(1) 8500-GALLON, (2) N/A 

4 – 30,000-GALLON PROPANE STORAGE 

TANKS, With Size 9' Diameter X 65' 

2 – 10,000-GALLON REFRIGERATION OIL 

STORAGE TANKS, With Size 10' Diameter X 19' 

3 – OIL STORAGE TANKS, (2) 2000-GALLON, 

(1) 100-GALLON 

3 – POLYOL RESIN STORAGE TANKS, 

(1) 8500-GALLON, (1) 4500-GALLON, (1) N/A 

3 – POLYOL STORAGE TANKS, 

(1) 6500-GALLON, (1) 4500-GALLON, (1) N/A 

2 – RESIN MIX TANKS 

1 – MDI DAY TANK 

PRINTING EQUIPMENT 

1 – ADDRESSOGRAPH-MULTIGRAPH MULTI- 

1120 CONVERTIBLE MODEL 3850-CD 

2-COLOR OFFSET PRINTING PRESS, S/N 

421342 (1992), Digital Control, Chain Delivery 

1 – ADDRESSOGRAPH-MULTIGRAPH MODEL 

1360-GPC 11" X 17" OFFSET PRINTING 

PRESS, With Color Head, 

1 – AMERIGRAPH MODEL V-28-1200 VERTICAL 

MERCURY PRINTER 

1 – CHALLENGE STYLE H SIZE 265 26" PAPER 

CUTTER, S/N 6958 

1 – NUARC 30" X 40" LIGHT TABLE 

STORAGE TANKS 

MISCELLANEOUS 

EQUIPMENT 

1 – LUCIFER MODEL LT82-R18 9.2KW DUAL- 

CHAMBER HEAT TREAT FURNACE, S/N 

5198, with Maximum Operating Temperature 

3200° F 

1 – CERAMIC SHRINK TUBE OVEN 

1 – SUPERSHEEN 2-COMPARTMENT 

BARREL TUMBLER 

1 – WOODTEK MODEL CT-101 2-HP DUST 

COLLECTOR, S/N 153863 (1990) 

1 – GAS 36" POWER TROWEL 

LARGE QUANTITY OF OFFICE PARTITIONING 

ADDRESSOGRAPH-MULTIGRAPH 

MULTI-1120 CONVERTIBLE 3850-CD 

2-COLOR OFFSET PRINTING PRESS 

15 


Narrow Aisle Forklifts • LPG Forklifts 

FORKLIFT TRUCKS 

NARROW AISLE FORKLIFTS 

9 – RAYMOND ELECTRIC STAND-UP RIDING REACH-TYPE NARROW 

AISLE FORKLIFT TRUCKS, 

(2) MODEL 211-R40TT 4000-LB. CAPACITY, S/Ns 021D-90-5290 

(1990) (#887), 021D-90-5291 (1990) (#888), With Lift 198", Forks 48", 

Solid Tires, 36-Volt, 

(3) MODEL EASI 4000-LB. CAPACITY, S/Ns EZ-A-97-07088 (#788), 

EZ-A-97-07087 (#787), EZ-A-97-07086 (#786), With Lift 226", Forks 

42", 

(1) MODEL 60-C40TT, S/N 060-92-05124 (#3019), With Lift 198", 

Forks 42", 

(3) MODEL DSS-300-TT 3000-LB. CAPACITY, S/Ns S300-01459-97 

(#459), S300-01460-97 (#460), S300-01461-97 (#461), With Lift 227", 

Forks 48", 

All With Overhead Guard 

(11) LPG FORKLIFTS 

2 – HYSTER MODEL S135XL 13,500-LB. CAPACITY LPG FORKLIFT 

TRUCKS, S/Ns B024002510N (1992) (#1088), B024002260M (1991) 

(#1000), N/A (#1030), Lift 134", Forks 60", Solid Tires, Overhead 

Guard 

2 – CLARK MODEL C500S80 8000-LB. CAPACITY LPG FORKLIFT 

TRUCKS, 

S/N 685-0424-9150K0F (1994) (#1009) With Lift 188", 

S/N 685-211-4241 (#1098) With Lift 168", 

Both With Forks 60", Solid Tires, Overhead Guard 

RAYMOND ELECTRIC STAND-UP RIDING REACH-TYPE 

NARROW AISLE FORKLIFT TRUCKS 

1 – CLARK MODEL C500 8000-LB. CAPACITY LPG FORKLIFT TRUCK, 

S/N 355-1371-2541 (#1028), Lift 188", Forks 60", Solid Tires, Overhead 

Guard 

1 – CLARK MODEL GCX20 4000-LB. CAPACITY LPG FORKLIFT 

TRUCK, S/N GX230-0237-9140KOF (1992) (#1095), Lift 152", Forks 

42", Solid Tires, Overhead Guard 

1 – YALE MODEL GLC040 4000-LB. CAPACITY LPG FORKLIFT TRUCK, 

S/N N568994 (2000) (#1008), Lift 189", Forks 42", Solid Tires, Overhead 

Guard 

1 – HYSTER MODEL S40XL 4000-LB. CAPACITY LPG FORKLIFT 

TRUCK, S/N C187V05815P (1993) (#1056), Lift 189", Forks 48", Solid 

Tires, Overhead Guard 

2 – HYSTER 3000-LB. CAPACITY LPG FORKLIFT TRUCKS, 

(1) MODEL H30XL, S/N C001812493N (1992) (#1002), With Forks 48", 

Side Shift, Cushion Tires, 

(1) MODEL S30XM, S/N C010H01688S (1995) (#1090), With Forks 42", 

Solid Tires, 

Both With Lift 127", Overhead Guard 

1 – CLARK MODEL CGC30 3000-LB. CAPACITY LPG FORKLIFT 

TRUCK, S/N C365LI-0096-9497FB (1998) (#1071), Lift 152", Forks 42", 

Solid Tires, Overhead Guard 

HYSTER MODEL 

S135XL 13,500-LB. 

CAPACITY LPG 

FORKLIFT TRUCK 

WHEN YOU NEED TO KNOW 

WHAT’S IT WORTH 

DoveBid Valuation Services for all of Your Valuation Needs 

Secured lenders look to DVS for precise liquidation values, the Global 

4000 for required financial reporting and taxation needs. Worldwide 

offices, unparalleled expertise and integrated auction services make DVS 

the answer. 

For more information, call 800.665.1043 

® 

16 

1991 


Electric Forklifts • Personnel Carts 

(61) ELECTRIC 

FORKLIFTS 

2 – CLARK 8000-LB. CAPACITY ELECTRIC 

FORKLIFT TRUCKS, 

(1) MODEL TM-12-25, S/N TM247-1177- 

9091FB (1995) (#897), With Lift 188", Forks 

48", Side Shift, 36-Volt, 

(1) MODEL EC500-80, S/N E685-23-6770 

(1987) (#943), With Lift 154", Forks 60", 

Both With Solid Tires, Overhead Guard 

4 – TCM MODEL FCB25H2 5000-LB. 

CAPACITY ELECTRIC FORKLIFT TRUCKS, 

25-74600-493 (1990) (#945), 25-74600-490 

(1987) (#942) With Side Shift 

S/Ns 25-74600-435 (1991) (#946), 

25-74600-451 (1990) (#947), 

All With Forks 48", Solid Tires, Overhead 

Guard, 48-Volt 

6 – HYSTER E50XL-33 5000-LB. CAPACITY 

ELECTRIC FORKLIFT TRUCKS, 

S/N C108V08550K (1989) (#951) With Fork 

Width Adjuster, S/N C108V09542K (1989) 

(#959) With Side Shift, S/Ns C108V07344J 

(1989) (#953), C108V09323K (1989) (#1006), 

C108V09511K (1989) (#956), C108V010371K 

(1989) (#920), All With Lift 240", Forks 48", 

Solid Tires, Overhead Guard, 48-Volt 

1 – HYSTER MODEL E50XM-33 5000-LB. 

CAPACITY ELECTRIC FORKLIFT TRUCK, 

S/N F108V0191R (1995) (#980), Lift 189", 

Forks 48", Side Shift, Solid Tires, Overhead 


1 – HYSTER E50XM-33 5000-LB. CAPACITY 

ELECTRIC FORKLIFT TRUCK, S/N 

C108V19813P (1995) (#885), Lift 189", Forks 

48", Side Shift, Solid Tires, Overhead Guard, 

48-Volt 

1 – HYSTER MODEL E50XL-32 5000-LB. 


S/N C108V09837K (#875), Lift 240", Forks 

48", Fork Adjusters, Solid Tires, Overhead 

Guard 

2 – HYSTER MODEL E50A 5000-LB. CAPACITY 

ELECTRIC FORKLIFT TRUCKS, S/Ns 

A108V02688W (#928), A108V02687W 

(#925), Lift 189", Forks 48", Side Shift, Solid 

Tires, Overhead Guard, 48-Volt 

1 – HYSTER MODEL E50B 5000-LB. 


S/N N/A (1995) (#921), Lift 189", Forks 48", 

Side Shift, Solid Tires, Overhead Guard, 48- 

Volt 

3 – HYSTER MODEL E45XM-33 4500-LB. 

CAPACITY ELECTRIC FORKLIFT TRUCKS, 

S/Ns F108V01831R (1994) (#858), 

F108V01832R (1994) (#859), F108V01837R 

(1994) (#860), Lift 189", Forks 42", Side Shift, 


1 – HYSTER MODEL E40B 4000-LB. 


S/N C108V10856E (1984) (#857), Lift 189", 



1 – CLARK MODEL ECG20 4000-LB. 


S/N CG358-0033-6779F (1998) (#924), Lift 

188", Forks 48", Solid Tires, Overhead Guard, 

48-Volt 


please visit www.dovebid.com 

10 – CLARK MODEL TM20 4000-LB. CAPACITY 

ELECTRIC FORKLIFT TRUCKS, 

S/Ns TM247-0867-9344B (1996) (#901), 

TM247-0464-9091FB (1995) (#895), TM247- 

1050-9091FB (1995) (#896), TM247-1037- 

8865FB (1992) (#989) With Lift 188", Side 

Shift, 

S/N TM247-01306345FA (1986) (#931), 

TM247-0207-6625FA (1986) (#932), TM247- 

0208-6625FA (1986) (#933), TM247- 

02936625FA (1986) (#934), TM247-0294- 

6625FA (1986) (#935), TM247-0036-6545FA 

(1986) (#930) With Lift 170", 

All With Forks 42", Solid Tires, Overhead 


7 – CLARK ESC20 4000-LB. CAPACITY 


E3570079-8970 (1992) (#890), E3570080- 

8970 (1992) (#891), E3570081-8970 (1992) 

(#892), E3570082-8970 (1992) (#893), 

E357-0678-9045FB (1992) (#898), E357- 

0677-9045FB (A# 849), E357-0677-9045FB 

(A# 899), Lift 188", Forks 48", Side Shift, 


1 – CLARK MODEL EC500-40 4000-LB. 


S/N E855-628-4731 (#929), Lift 154", Forks 

42", Solid Tires, Overhead Guard, 36-Volt 

1 – HYSTER MODEL E30BS 3000-LB. 


S/N B114V02051W (#916), Lift 127", Forks 

42", Side Shift, Solid Tires, Overhead Guard 

7 – HYSTER E30XL 3000-LB. CAPACITY 


C114V06691R (1994) (#974), C114V2031G 

(1989) (#963), C114V3922K (1989) (#964), 

C114V3723K (1989) (#965), C114V3725K 

(1989) (#961), C114V3726K (1989) (#962), 

C114V3727K (1989) (#960), Lift 127", Forks 

36", Solid Tires, Overhead Guard, 36-Volt 

4 – TCM FCB15H2 3000-LB. CAPACITY 


74400-522 (1987) (#937), 74400-553 (1987) 

(#940), 74400-554 (1987) (#941), 15A- 

70900345 (#949), Lift 106", Forks 42", Solid 

Tires, Overhead Guard, 48-Volt 

1 – CLARK MODEL EC500S30 3000-LB. 


S/N E235-0035-8815FD (#894), Lift 116", 



7 – CLARK MODEL TW-RIS-25 2500-LB. 

CAPACITY ELECTRIC FORKLIFT 

TRUCKS, S/Ns TW235-0124-3786 (#902), 

TW235-0147-3755 (#903), TW235-0158- 

3786 (#904), TW235-0159-3786 (#905), 

TW235-0161-3786 (#907), TW235-0176- 

3786 (#909), TW235-0178-3786 (#911), Lift 

170", Forks 42", Solid Tires, Overhead 


PERSONNEL CARTS 

14 – 2-PERSON 3-WHEEL ELECTRIC 

PERSONNEL CARTS, (11) CUSHMAN, 

(#812), (#813), (#814), (#815), (#816), 

(#817), (#818), (#820), (#823), (#835), 

(#979), (3) E-Z-GO, (#841), (#842), (#853) 

2 – TAYLOR-DUNN 1-PERSON 3-WHEEL 

FLATBED ELECTRIC STOCK CARTS, 

(#828), (#829) 

1987 

TCM MODEL FCB25H2 5000-LB. 

CAPACITY ELECTRIC 

FORKLIFT TRUCK 

1995 

CLARK MODEL TM-12-25 8000-LB. AND 

MODEL TM20 4000-LB. ELECTRIC 

FORKLIFT TRUCKS 

1995 

HYSTER E50XM-33 5000-LB. CAPACITY 

ELECTRIC FORKLIFT TRUCK 

17 


Conveyors • Material Handling • Banding Equipment 

18 

SHEET LIFTERS 

3 – SHEET LIFTERS, (2) 15-TON 

CAPACITY, S/Ns 26893-1, 26518-1, 

(1) 10-TON CAPACITY, S/N 26518-2 

1 – CRANE CADY MODEL A-1048 

10,000-LB. CAPACITY SHEET 

LIFTER, S/N 5959LPA 

SCISSOR-LIFT TABLES 

2 – SOUTHWORTH SCISSOR-LIFT 

TABLES, 

(1) 2000-LB. CAPACITY, With Table 

Size 5' X 7', Lift 18'4", With 8' X 6' X 

18'6" Cage, 

(1) 1500-LB. CAPACITY ELECTRIC 

ROLLER CONVEYORS 

8 – POWER ROLLER CONVEYORS, 

(1) 54"W X 60'L, With Chain Infeed & 

Exit Conveyors on Each End, Rollers on 

6" Centers, 

(1) 53"W X 32'L, With 3" Rollers on 6" 

Centers, 

(1) 45"W X 50'L, 

(1) 44.5"W X 83'L, With Rollers on 4.5" 

Centers, 

(1) 44"W X 10'L, With Pop-Up Chain 

Entry & Exit Transfer Conveyors Making 

180° Turn to Reverse Product Direction, 

Rollers on 6" Centers, 

(1) 43"W X 39.5'L, With Overall Line 

Length 100', Xenorol Rubber Band With 

45° Curve to 26' Straight Length to 45° 

Curve to 12' Straight Length to 90° 

Curve, 

(1) 42.5"W X 85'L, 

(1) 41"W X 100'L BELT/ROLLER, With 

Rollers on 3" Centers, 

5 – 90° POWER ROLLER CONVEYORS, 

(1) 50"W, 

(2) 50"W, With Pop-Up Chain Conveyor 

on Exit End, 

(1) 48"W, 

(1) 47" 

54 – GRAVITY ROLLER CONVEYORS, 

(3) 48.5"W X 79"L, 

(2) 42.5"W X 70'L, 

(1) 42"W X 120'L, 

(1) 42"W X 62’L, 

(3) 41"W X 38'L, With Rollers on 

3" Centers, 

(1) 40"W X 260'L INCLINED, 

(1) 40"W X 60'L, With Rollers on 3" 

Centers, 


Centers, Steel Slats Between Rollers, 


Centers, Steel Slats Between Rollers, 

(26) to 22'L 

SLAT CONVEYORS 

1 – POWER WOOD SLAT CONVEYOR 

LINE: 43"W X 148'L, 180° Power Roller 

Conveyor, (1) 43"W X 153'L, 36" X 5.3" 

Slats 

5 – POWER WOOD SLAT CONVEYORS, 

(1) 42.4"W X 310'L, With 210' Upstairs 

& 45' Declining to Ground Level & 55' at 

Floor Level, 

(1) 42"W X 165'L, 

(1) 42"W X 158'L, 

(1) 32"W X 48'L, 

(1) 26"W X 58'L, With 5.3" Slats 

GRAVITY ROLLER CONVEYOR 

MULTI-BELT CONVEYORS 

5 – MULTI-BELT CONVEYORS, 

(1) 54"W X 10'L, With (2) 4" Belts on 44" Centers, 

(1) 49"W X 40'L, With (2) 4" Belts on 28" Centers, 

(1) 42"W X 10'L, With (4) 3/4" Belts on 12" Centers, 

Pop-Up Roller Infeed, 

(1) 42"W X 10'L, With (2) 3/4" Belts on 35" Centers, 

Pop-Up Roller Infeed to Center of Conveyor, 

(1) 39"W X 140'L, With (2) 4" Belts 

BELT CONVEYORS 

1 – 3700' CABINET TRANSPORT CONVEYOR 

SYSTEM 

11 – BUSCHMAN BELT CONVEYORS, (1) 42"W X 14'L, 

(1) 42"W X 8’L, (1) 36"W X 260'L, (2) 36"W X 53'L, 

(1) 36"W X 48'L, (1) 36"W X 37'L, (1) 36"W X 28'L, 

(1) 36"W X 21'L, (1) 36"W X 19'L, (1) 36"W X 9'L 

1 – 34"W X 100'L BELT CONVEYOR LINE, 34"W X 

100'L Belt Conveyor, 42"W X 132"L Multi-Belt 

Conveyor, (2) Leather Belts on 38" Centers, 2nd 

Section With (2) 12" Pop-Up Belts @ 90° to 42"W X 

132"L Multi-Belt Conveyor With (2) 12" Belts 

2 – VARIABLE SPEED BELT CONVEYORS, 

(1) 26-1/2"W X 21'L, (1) 20"W X 21'L 

2 – BELT CONVEYORS, (1) 24"W X 55'L, (1) 33"W X 

33'L 

1 – 35'L DUAL LEATHER BELT CONVEYOR, Product 

Size 57"W X 26"H, (2) Narrow Leather Belts, Pop-Up 

Chain Transfer Conveyor at End of Line 

CHAIN CONVEYORS 

4 – POWER CHAIN CONVEYORS, 

(1) 57"W X 60'L, With (2) Chains on 44" Centers, 



(1) 35.5"W X 70'L, With (2) Chains on 18" Centers 

OVERHEAD CHAIN 

CONVEYOR SYSTEMS 

2 – OVERHEAD CLOSED-LOOP CHAIN CONVEYOR 

SYSTEMS, (1) 205'L X 13.5’W, (1) 155'L X 8'W 

SCRAP CONVEYORS 

3 – NEW LONDON SCRAP CONVEYORS, (1) MODEL 

T3 2-1/2" 721, S/N 96-40927, (1) STEEL-TRAK, 

S/N 99-55655, (1) MODEL N/A, S/N 91-25853 

ELEVATORS 

1 – ROACH CONVEYOR SYSTEM, Consisting of: 84"W 

X 50"D X 25’H Elevator, (For Transporting Boxed 

Refrigerators From 3'H Conveyor to 17.5'H 

Conveyor) 

3 – TRANSPORT ELEVATORS, (1) 30' X 62' X 14'H, 

(1) 112” X 67" X 20'H, (1) N/A 

1 – Z-LOADER AUTOMATED PLATFORM CABINET 

ELEVATOR, With Safety Cutoff 

3700' CABINET TRANSPORT 

CONVEOR SYSTEM 

POWER CHAIN 

CONVEYOR 

MATERIAL HANDLING 

EQUIPMENT 

5 – RAYMOND ELETOTE MODEL AGV-55 

LASER-GUIDED SELF-PROPELLED 

FLATBED CARTS, With (2) Nutting 

4-Wheel Flatbed Trailers 

1 – ELWELL-PARKER MODEL E31-N415-20 

20,000-LB. CAPACITY ELECTRIC DIE 

TRUCK, S/N 26939 (#1007), Lift 96", 

Platform Size 42" X 60" 

2 – RAYMOND MODEL 114TM-TOW 10,000- 

LB. CAPACITY TOW TRACTORS, S/N 

114-94-11959 (#851), 114-00-30969 

(#831), Drawbar Capacity 200-Lbs., 

Intermittent 700-Lbs. 

8 – TILTMASTER 1000-LB. CAPACITY 

HYDRAULIC GAYLORD BOX TILTING 

TRUCKS 

1 – ECONOMY 1000-LB. CAPACITY DIE LIFT 

TRUCK, S/N 24387 

2 – 4000-LB. CAPACITY ELECTRIC 

WALKIE-TYPE PALLET TRUCKS, 

(1) RAYMOND MODEL EMC, 

S/N EMC-97-03756, (1) CROWN 

2 – MTC 2500-LB. CAP. PORTABLE ROLLERS 

LARGE QUANTITY OF CARTS, Including: 

A-Frame, Die, Dock, Drum, Parts Storage, 

Stock, Etc. 

LARGE QUANTITY OF PALLET RACKING & 

SHELVING 

Forklift Drum Handling Attachment, Totes, 2- 

Wheel Hand Trucks, 4-Wheel Dollies, Portable 

Gantry Engine Hoist, Coil Hook, Lifting Chains, 

Drum Pump, Slings, Self Dumping Hoppers, 

6000-Lb. Capacity & 4000-Lb. Capacity Battery 

Clamps, Battery Wash Station, Hobart Battery 

Charger Programmers, Etc. 

MEZZANINES 

1 – 23,520-SQ FT STEEL FRAME 

MEZZANINE, Height 13', (2) Staircases 

1 – 12,760-SQ FT MEZZANINE, Height 13'7", 

Staircase 

1 – 11,000-SQ FT L-SHAPED MEZZANINE, 

Height 13'7", (2) Staircases 

6 – TUBULAR STEEL MEZZANINES, With 

Steel Floor Trusses or Steel Beam Trusses 

Covered With Corrugated Steel Sheeting & 

Plywood or Composite Flooring 

BANDING EQUIPMENT 

2 – A & H AUTOMATIC HYDRAULIC 

BANDING SYSTEMS, Steel Band 3/8", 

Transfer Conveyor, PanelView 550 

Interface Control 

2 – SIGNODE 2-STATION SEMI-AUTOMATIC 

CARTON CAP BANDING MACHINES, 

Top/Bottom Carton Banding Station, Carton 

Insertion Station, Pedestal Control 


Support Equipment 

ELWELL-PARKER 

MODEL E31-N415-20 

20,000-LB. CAPACITY 

ELECTRIC DIE TRUCK 

UNIVEX MODEL M12 

4-SPEED 10-QT MIXER 

(10) SCALES 

1 – FWC 10,000-LB. 

CAPACITY DIGITAL 

PLATFORM SCALE, With 

Digi Model DC-190 Digital 

Readout, With 50-Lb. 

Capacity Platform Scale 

1 – INDIANA 10,000-LB. 


PLATFORM SCALE, With 

NCI Weightronix Model 

8250 Digital Platform Scale 

& Readout 

1 – PENNSYLVANIA MODEL 

DC-10/50 6300-LB. 


PLATFORM SCALE, 

S/N 112604 

1 – TOLEDO 31-1541-FC 

6250-LB. CAPACITY 

IN-GROUND DIAL BEAM 

PLATFORM SCALE, 

S/N 772945, With Platform 

Size 60" X 48" 

1 – AND MODEL EP12KA 

DIGITAL PLATFORM 

SCALE 

4 – JADEUER MODEL 

JCA-30K DIGITAL 

PLATFORM SCALES 

1 – TOLEDO LR-45603 

DIGITAL PLATFORM 

SCALE 

INGERSOLL-RAND 200-HP ROTARY 

SCREW AIR COMPRESSOR 

INGERSOLL-RAND 50-HP 

AIR COMPRESSOR 

FIRE SUPPRESSION SYSTEMS 

1 – ANSUL MODEL 1300 HALON FIRE SUPPRESSION 

SYSTEM, Consisting of: (4) Interconnected 182-Lb. Halon 

Cylinders, Back-Up System, Including: (2) 300-Lb. & 

220-Lb. Halon Cylinders 

2 – HALON FIRE SUPPRESSION SYSTEMS, Consisting of: 

Primary & Back-Up Halon Cylinders 

BOILERS 

3 – KEWANEE GAS-FIRED HIGH PRESSURE PACKAGE 

BOILERS 

(22) AIR COMPRESSORS 

9 – INGERSOLL-RAND 200-HP ROTARY SCREW AIR 

COMPRESSORS, 

(8) MODEL SSR-XF200, (6) (1990), 2 With Acoustical 

Housing, (2) (1988), With Intellisys Control, 

(1) MODEL SSR-XP200, (1988), 

(1) MODEL SSR-EP200, (1988), 

All With Capacity 973 CFM 

6 – GARDNER-DENVER ROTARY SCREW AIR 

COMPRESSORS, (1) 200-HP, (1985), (3) 150-HP, 

(ALL 1983), (2) 100-HP, (BOTH 1988), All With Acoustical 

Housing 

2 – WORTHINGTON ROTARY SCREW AIR COMPRESSORS, 

(1) 200-HP, (1) 75-HP, Both With Acoustical Housing 

2 – INGERSOLL-RAND TYPE XLE 150-HP RECIPROCATING 

AIR COMPRESSORS, S/Ns JH955, JH508, Size 16" X 10" X 

7", 600 RPM, Lubrication 

2 – INGERSOLL-RAND MODEL SSR ROTARY SCREW AIR 

COMPRESSORS, 

(1) 100-HP, With Acoustical Housing, 

(1) 50-HP 

1 – GARDNER-DENVER 50-HP W-TYPE 2-STAGE AIR 

COMPRESSOR, (1987) 

(24) AIR DRYERS 

20 – PNEUMATECH HEATED REGENERATIVE DESICCANT 

AIR DRYERS, 

(2) MODEL PE-5000, S/Ns 9005-S107063-39653, N/A, With 

Capacity 5000 CFM, 

(3) MODEL PE-1800, S/Ns S611-S100624-26625, (2) N/A, 

With Capacity 1800 CFM, 

(9) M0DEL PE-1100, S/Ns 8808-S102460-32395, 

8502-S08976-21786, (7) N/A, With Capacity 1100 SCFM, 

(6) MODEL PEH-270, S/Ns 8704-S00199-21809, (5) N/A 

3 – PNEUMATECH HEAT REACTIVATED REGENERATIVE 

COMPRESSED AIR DRYERS 

1 – GENERAL MODEL R-320W-30H REFRIGERATED 

COMPRESSED AIR DRYER, S/N R-2688, With Capacity 

1600 SCFM 

18 – VERTICAL AIR RECEIVING TANKS 

4 – 1000-GALLON VERTICAL AIR RECEIVING TANKS 

PNEUMATECH HEATED 

REGENERATIVE DESICCANT AIR 

DRYER 

SHOP & FACTORY 

Water Softening & Purification Systems, 

Refrigerant Charging & Reclamation Systems, 

Vacuum Pumps, Arbor Press, Portable Safety 

Ladders, Fans, Banding Outfits, Steel Horses, 

Oxy/Acetylene Welding Outfit, Drum De-Header, 

Paint Conditioner, Square D Buss Connector, 

Shop Vacs, Dust Collectors, Hydraulic & Oil 

Pumps, Welding Cooling System, Heat Treat Oil 

Bath Tank, Wire Feeder, Temperature Control, 

Etc. 

TELEPHONE & PAGING 

SYSTEMS 

1 – SIEMENS HICOM MODEL 300-EX 

SERIES 9000 TELEPHONE SYSTEM, 

(1997), Interconnected to Paging System, 

(500) Digital Key Sets, (300) Analog Key 

Sets, (Potential for Expansion to 5200 

Phones), Voice Mail for (300) Users, Wired 

for (800) Lines, (Late Delivery – Available 

After 12/22/04) 

1 – ZETRON MODEL 640 4-CHANNEL 

PAGING SYSTEM, Capacity (300) Pagers, 

Voice & LED-Activated 

CAFETERIA EQUIPMENT 

1 – NORLAKE 8’ X 8’ X 7-1/2’ WALK-IN 

FREEZER 

1 – NORLAKE 8’ X 8’ X 7-1/2’ WALK-IN 

REFRIGERATOR 

1 – DELFIELD/ALCO 3-DOOR STAINLESS 

STEEL FREEZER 

1 – SLIDING GLASS DOOR REACH-IN 

BEVERAGE COOLER 

3 – CONVECTION OVENS, (1) HENNY 

PENNY THERMA-VEC SURE CHEF 

ROTISSERIE, (1) BLODGETT, (1) TABLE- 

TOP 

2 – STAINLESS STEEL DEEP FRYERS, 

(1) DOUBLE, (1) 2-WELL 

1 – 48" STAINLESS STEEL GRILL 

2 – 3-1/2’ X 12' STAINLESS STEEL HOT 

TABLES, (1) 6-WELL 

1 – BERKEL ALUMINUM MANUAL SLICER 

1 – UNIVEX MODEL M12 4-SPEED 10-QT 

MIXER 

Food Warmers, Microwaves, Drink Mixer, Scale, 

Wall Exhaust Units, Stainless Steel Sinks, 

Stainless Steel Salad Bar, Refrigerated 

Sandwich Prep Counter, Stainless Steel Tables, 

Serving Counters, Tray & Silverware Cabinet, 

Portable Sheet Pan Rack, Booths, Etc. 

19 


Global Provider of Capital Asset Auction & Valuation Services 

Over $3.3 billion sold in 22 asset categories and over $34 billion in assets valued across 15,000 appraisals since 1990. 

Auctioneers, Sale Advisors & Appraisers 

Worldwide Headquarters 

1241 East Hillsdale Boulevard 

Foster City, California 94404 

650.571.7400 • Fax: 650.572.1502 


Customer Service 800.665.1042 

® 

Presorted 

First Class Mail 

U.S. Postage 

PAID 

Detroit, Mich. 

Permit No. 1904 

Return Service Requested 

For further information, please contact 

Randy Small 

Phone 909.466.9847 

E-mail rsmall@dovebid.com 

DoveBid Webcast Auction 

• Bid live in Galesburg, Illinois 

• Bid live over the internet at www.dovebid.com 

Surplus equipment from the ongoing operations of 

WEBCAST 

AUCTION 

October 27, 2004 

Complete 2.4-Million sq ft Refrigerator 

Manufacturing Facility 

Featuring: Refrigerator Manufacturing, Stamping, 

Fabricating, Plastic Extruding, Thermoforming, 

Ancillary Plastics, Toolroom, Finishing, 

Material Handling Equipment 

Upcoming auctions & private treaty sales • www.dovebid.com 

OCTOBER 14: THE HOOVER COMPANY – (WEBCAST) Complete Plastic 

Injection Molding, & Die Casting Facilities, Featuring: (25) Plastic Injection Molding 

Machines from 200-Ton X 10.5-Oz to 1200-Ton X 90-Oz, (10) Cold Chamber Die 

Casting Machines, High Speed Straight Side Punch Press Line, Ancillary Plastics, Die 

Casting, Toolroom & Material Handling Equipment. North Canton, OH USA 

OCTOBER 19: ALL AMERICAN BOTTLED WATER CORPORATION, 

assets formerly owned by Miller, Pabst & Olympia Brewing Companies 

– (SEALED BID REAL ESTATE AUCTION) (4) Multi-Use Real Estate Parcels. 

Bid submission deadline: 10/19/04 5pm PT Dovebid.com (Tumwater (Seattle), WA 

OCTOBER 19: HEWLETT PACKARD – (ONLINE) Plant Support & Facility, IT, 

Machine Tools, Semiconductor, Electronic Components, Test & Measurement 

Equipment, Office Furnishings and Food & Beverage Equipment. www.dovebid.com 

OCTOBER 20: BIO/PHARMA EXCHANGE #10 – (ONLINE) Biotech, Medical 

and Pharmaceutical Equipment. www.dovebid.com (USA) 

OCTOBER 25: FORD MOTOR COMPANY - DEARBORN ASSEMBLY 

PLANT – (ONLINE) Automotive Assembly, Body Shop (Welding) and Facility 

Support Equipment. www.dovebid.com (USA) 

LEASE FINANCING AVAILABLE 

Maximize your Bidding Power! 

Get PRE-APPROVED for up to $75,000 USD in 

'Same-As-Cash-On-Auction-Day' Lease Financing. 

For more information, call the 

AuctionLease Department at 800.438.1470 

or apply online at www.AuctionLease.com. 

NEED HELP WITH SHIPPING 

As a courtesy to our buyers, 

DoveBid can provide contact information 

for shipping companies. 

For details, please visit DoveBid’s Website at www.dovebid.com or 

call our customer service department at 800.665.1042. 

©2004 DOVEBID, ALL RIGHTS RESERVED • PRINTED IN USA • #MAYT0722 • CA Bond# 69567717 

DoveBid and the DoveBid logo are registered trademarks of DoveBid, Inc. 

Auctioneers & Licenses: DoveBid, Inc. #44.0000206, William Gardner #41.000802, Scott Lonkart #41.000801 

Complete Terms & Conditions are contained in the Sale Catalog and on the website at www.dovebid.com. 

Please review the Terms and Conditions prior to placing bids on any items. Select assets may be subject to prior sale. 

Worldwide Headquarters: Foster City, California

Maytag Virtual Brochure

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?