GERMAN ENGINEERING EXCELLENCE

GERMAN ENGINEERING EXCELLENCE
English

loudspeaker systems
The full-range speakers of the D-LITE series are extremely
light, mechanically durable polypropylene cabinets for professional
portable and fixed installation sound reinforcement
applications in small to medium-sized venues. The wide range
of mounting accessories available for the enclosures and their
tasteful styling permit them to be used without problems in critical
fixed installation applications.
Being of polypropylene, the enclosures are capable of withstanding
the roughest handling during transport and use. The integration of
the constant directivity HF horns into the baffl e is CAD-optimized.
The robust powder-coated steel grilles at the front of the enclosures
are covered by black acoustic foam plastic. Both the Speakon sockets
in the connection panels are recessed to allow the cabinets to be
operated in cramped locations. The bevelled sides of the enclosures
allow them to be used without problems in monitor applications in
which more bass extension is required than that provided by typical
monitor loudspeakers. Robust handles, integrated stand adapters,
and a wide range of fl ying and mounting accessories facilitate the
transport and setting up of the enclosures as well as allowing them
to be ideally positioned and aimed. Very powerful amplifi ers can be
used to achieve the widest possible dynamic range as the loudspeakers
of the D-Lite series offer very high power handling and are
for the most part afforded additional reliable protection by the fullyelectronic
Voice Coil Tracking Protection system as well as halogen
protectors against thermal overload.
The internal passive crossovers are optimized for long distances and
even dispersion, allowing D-LITE cabinets to be used under acoustically
unfavourable conditions.

full-range cabinet
24 kg
The D 15-3 sets new standards in the area of professional polypropylene
enclosures, reconciling the highest possible sound
pressure levels, maximum power handling and linear frequency
response with modest dimensions and extreme lightness.
Equipped with a DYNACORD DND 15400 neodymium loudspeaker
capable of high power handling, the D 15-3 convinces with its powerful
and natural voice reproduction and impressive sub bass.
For the midrange, an extremely low-distortion DYNACORD DND
6120 neodymium loudspeaker is used, which with its conical 120°
dispersion guarantees uncoloured reproduction of vocals free from
alignment problems. The integration into the baffle of the constant
directivity high-frequency horn, which has a nominal dispersion angle
of 90° x 50°, is CAD-optimized, whilst the DH-3 HF driver provides
transparent reproduction of the high frequencies. The Voice Coil Tracking
Protection system combines with halogen protectors to provide
the loudspeakers with reliable protection against thermal overload.
In addition to its use as a pure full-range speaker, in which role it delivers
excellent results, no additional amplifier is required for the direct
parallel connection of the D 15-3 to a suitable passive subwoofer with
an integrated high-cut filter, such as the Sub 118. The ideal drivers
for full-range or full-range/sub combinations are the professional power
amplifiers of the DYNACORD Compact Linear or Switch Mode Precision
LX series or the PowerMate 2.

•full-range cabinet
19 kg
DYNACORD‘s traditional and popular 12“ / 3-way concept sees
a further dramatic improvement in performance with the introduction
of the D 12-3. With its voluminous bass reproduction
and its uncoloured, extremely low-distortion vocal reproduction
combined with its transparent resolution throughout the
entire frequency range, this lightweight full-range satellite
stands head and shoulders above the multitude of other enclosures
on the market made from synthetic materials. The triedand-tested
DL 12 BFH low frequency driver, with its high power
handling, transduces the frequency range below 700 Hz.
As is the case with the D 15-3, the midrange is handled by an extremely
low-distortion DYNACORD DND 6120 neodymium MF driver,
whilst a DH-3 coupled with a 90° x 50° constant-directivity HF horn
delivers transparent reproduction of the range above 4kHz. Thanks
to the extremely broad (>120°) conical dispersion pattern in the
midrange, even in acoustically unfavourable venues no exaggeratedly
precise aiming of the enclosures at the areas to be covered is necessary.
The Voice Coil Tracking Protection system combines with halogen
protectors to provide the loudspeakers with reliable protection
against thermal overload.
For the D 12-3, whether operating as a full-range speaker or linked
to passive subwoofers with integrated high-cut filters (such as the
Sub 115 or Sub 118), the ideal drivers are the PowerMates 1000-2 /
1600-2 or professional power amplifiers of the Compact Linear series.
The active version is equipped with the same loudspeakers, offering
in addition high-quality integrated digital power amplifiers rated at
350W (Lo) and 150W (Mid/Hi) as well as signal processing specially
tuned to the loudspeakers. The input signal can be fed in via either
an XLR or a jack plug and looped through to additional D 12-3A boxes
via an XLR cable. The built-in level control provides a simple and
convenient way of adjusting the volume.

•
•full-range cabinet
16 kg
Weighing a mere 16kg, the D 12 2-way full-range cabinet with
its polypropylene enclosure has an extremely linear frequency
response and is notable for its powerful, natural reproduction
of the voice as well as its transparent resolution throughout the
entire frequency range. Its elegant styling and tasteful black
and white finishes make it suitable for a very wide range of
small to medium-sized events as well as critical fixed installation
applications.
The high-performance 12“ DL 12 BFH transduces the bass and
midrange up to 1.5kHz, whilst in the high-frequency range, an ND-2
neodymium driver is coupled with a large-format constant Q horn
with an 80° x 40° coverage pattern, the integration of which into the
baffle is CAD-optimized. As with all the D-LITE cabinets, thanks
to the fully electronic Voice Coil Tracking Protection with halogen
protectors, extremely high, distortion-free peak sound levels can be
generated, and professional power amplifiers can be used the rated
outputs of which are the same as the peak values of the enclosures
they are driving without the reliability of either being compromised.
When used in active satellite systems, such as for example the active
3-channel PowerSub 315 from DYNACORD, the D 12 or D 12-3 cabinets
are simply connected to the Left and Right Satellite Outputs of
the PowerSub 315. The use of Compact Linear series power amplifiers
or the PowerMate 2 can be recommended for both solo full-range
operation and use in combination with passive subwoofers.
The D 12 T is designed with ultra-low-distortion toroidal core transformers
for 100V audio networks. Like the D 12, the D 12 T is available
in both black (D12T # D113048) and white (D12TW # D113093)
finishes.

full-range cabinet
8,8 kg
The D 8 is a very compact, lightweight and mechanically very
durable 8“/1“ two-way thermoplastic cabinet for professional
sound reinforcement applications. It is remarkable in its class
for the very high sound pressure levels it is capable of achieving
as well as its outstanding audio performance.
The wide range of mounting accessories available for the enclosure
and its tastefully understated styling permit its convenient use even
in critical applications for fixed installations. The housing is made
from ABS and capable of withstanding the roughest of handling during
transportation and use.
The D8‘s bass and midrange is the responsibility of the DND8200-8
low-distortion neodymium woofer. The integration into the baffle of
the symmetrically radiating Constant Directivity high frequency horn,
with its nominal radiation angle of 90° x 90° (horizontal x vertical) and
Electro-Voice DH3 driver, is CAD-optimized. With power handling of
250W (rated) and 1000W (peak), a maximum SPL of 124dB and a
frequency range of 65Hz - 20kHz, the D8 performs outstanding service
not only as full-range cabinet but also as the mid/high-frequency
component of high-class active and passive satellite systems.
The crossover is optimized to achieve a long throw and a very even
sound pattern, permitting the use of the D8 even under unfavorable
acoustic environmental conditions. The loudspeaker components
are protected by thermo-switches and halogen protectors against
thermal overload. The front is clad in black acoustic foam with a robust,
powder-coated steel grille. The SPEAKON sockets on the connection
panel are recessed. The enclosure is trapezoidal in shape, making
its use in monitoring applications unproblematic.

subwoofer
20 kg
The DYNACORD SUB 112 is a vented, direct-radiating cabinet
equipped with a high-power DYNACORD DND12S400 neodymium
woofer boasting power handling of 400W (rated) and 1600W
(peak). The conical vent system results in less flow loss and
lower air noise than conventional vented designs. High sound
pressure levels are also generated at low frequencies with significantly
less distortion than by conventional bass reflex
vents.
The SUB 112 contains a passive low-pass filter with a slope of 6 dB/
octave. The SUB 112 can therefore be used directly in parallel to appropriate
full-range cabinets, e.g. the DYNACORD D 8, if an extended
bass reproduction is required. The SUB 112 cabinet is made of
15 mm birch plywood. All corner joints and braces are grooved and
glued. The cabinet‘s surface is painted with a robust, dual component
lacquer finish. The acoustic foam and powder coated steel grille
at the front protect the DND12S400 woofer from harm during transportation
and against the effects of inclement weather.
The connection panel offers two 4-pin Speakon sockets (INPUT/
THRU) for a more secure connection and the easy daisy-chaining
of cabinets. A threaded pole adapter is recessed in the top of the
SUB 112 cabinet for the swift and safe pole-mounting of suitable
full-range cabinets.
The cabinet is equipped with four large rubber feet for greater stability.
Two handles on the side make it possible to carry the device easily
and safely. A hard-wearing protective cover is available as an optional
accessory.

subwoofer
34 kg
The Sub 115 is a vented direct-radiating enclosure with an Electro-
Voice EVS 15S woofer, which offers high power handling. As
a reflex system the newly developed and patented High-Speed
Laminar Vent (HSLV) is used. Compared to conventional bass
reflex vents, airflow loss and air noise are considerably reduced
by HSLV technology. High sound pressure levels can be generated
at low frequencies with considerably less distortion than
with conventional bass-reflex designs.
Like almost all the loudspeakers of the D-LITE series, the subwoofers,
too, are reliably protected against thermal overload by the fully
electronic Voice Coil Tracking Protection system and halogen protectors.
Extremely powerful power amplifiers can therefore be used
with a view to achieving the widest possible dynamic range without
any thermal overloading of the voice coils. Instead of a disruptive
shutdown, such as those produced by conventional safety circuits,
VCTP implements a gentler reining in of the power to safe limits whenever
an overload occurs.
For universal use in combination with full-range tops, such as the D 12,
D 12-3 or D 15-3, the Sub 115 and Sub 118 are equipped with highcut
filters to allow their simple and unproblematic connection in parallel
with the tops.
The Sub 115 has the same styling and footprint as the active 3-channel
PowerSub 315 and is therefore the ideal choice to provide powerful
reinforcement of the bass region in active systems.

subwoofer
50 kg
Like the Sub 115, the Sub 118 is implemented as a direct-radiating
vented subwoofer with a High-Speed Laminar Vent.
Offering extremely high power handling (700W RMS and 2800W peak
power), the DYNACORD LFS 18700 low frequency driver generates a
powerful and distortion-free bass foundation that reaches all the way
down to 30Hz generating sound pressure levels as high as 132dB.
The enclosures of both subwoofers are made from birch multiplex with
a durable dual-component coating. The upper bowl handle contains
an integrated M 20 screw to accommodate a mounting pole. Suitably
equipped full-range cabinets can therefore be mounted directly above
the subwoofers with a consequent saving of space.
The enclosures are equipped with eight feet (with large footprints), four
robust casters on the back, and ergonomically designed bowl handles
to ensure easy transportation and safe setting-up.

aktive subwoofer
22,5 kg
The PowerSub 312 active 12“ subwoofer, which is equipped
with an integrated three-channel power amplifier with a total
output of 1300W, was specially conceived to permit the swift
and simple creation of a subwoofer satellite system, for which
purpose all that is needed is to connect two passive (e.g. DY-
NACORD D8) loudspeaker systems to the Speakon outputs of
the PowerSub 312.
The „X-Over“ switch offers a choice of three discrete frequencies for
the crossover between the subwoofer and the satellites: 70Hz, 100
Hz and 140 Hz, whilst the „Sub Level“ control allows you to adjust
the output of the PowerSub 312 within the range -∞dB to +10dB. The
PowerSub 312 is made from multiplex birch plywood and capable of
withstanding the toughest challenges during transportation as well
as in use. The integrated lightweight 800W + 2 x 250W digital power
amplifier is perfectly attuned in every respect to the integrated DY-
NACORD DND 12S400 woofer to maximize the dynamic range and
audio quality and ensure that the woofer is invariably driven within
its optimum working range. To provide further assurance that these
operating limits are respected, the performance is supervised by additional
protective circuitry such as voice coil protection, DC/HF protection,
audio limiters, back EMF protection and thermal protection.
Together these ensure that even when the most extreme demands
are placed upon the system under the most unfavorable conditions,
the PowerSub 312 continues to operate flawlessly. The use of „Class
D Digital Technology“ ensures that there is considerably less power
dissipation than in normal Class AB designs. The thermal load on the
components is therefore markedly reduced. The enclosure is coated
with 2K lacquer, extremely scratch-resistant and proof against rough
handling during transportation.
A robust powder-coated steel grille protects the DYNACORD DND
12S400 woofer against mechanical damage. All the control elements
are recessed to provide optimal protection of the PowerSub 312’s
most sensitive parts even during transportation. For greater carrying
comfort, the enclosure is furnished with two sturdy handles, whilst an
integrated treaded pole adaptor saves space on stage by allowing
you to pole-mount a satellite on top of the subwoofer.

aktive subwoofer
45 kg
The PowerSub 315 is an active vented subwoofer featuring the
novel High-Speed Laminar Vent design. Weighing a mere 45 kg,
the lightweight enclosure accommodates all the electronics
and audio processors in addition to the switchable stereo crossover
(80 Hz / 100 Hz / 160 Hz) and four Class D power amplifier
blocks delivering a combined output of 2000 watts. This is
the ideal centerpiece of a high-powered satellite system. Two
bridged blocks provided the integrated 15“ DYNACORD LFS 1008
subwoofer with a total of 1000W / 8 ohms and 2 x 500W / 4 ohms
are made available to the connected satellites. The subwoofer
level is continuously adjustable and you can select between
three different sub/satellite crossover frequencies ranging from
80Hz to 160Hz.
To provide particularly powerful reinforcement of the low frequency
range, two passive (e.g. DYNACORD Sub 115) subwoofers can be
driven by the PowerSub 315. In this mode, the integrated sub power
amplifiers switch from 1 x 1000W / 8 ohms to 2 x 500W / 4 ohms. In
a fully-expanded system, the PowerSub 315 can drive a total of four
8 ohm satellites and an additional two passive 8 ohm subwoofers
without any difficulty. Packed in an extremely robust but compact
multiply birch multiplex enclosure with castors included in the delivery,
the PowerSub 315 offers easy transport and safe handling. An M20
screwed flange is integrated into the upper bowl handle to accommodate
a mounting pole.

system
D-Lite 1000
2 x D 8
1 x PowerSub 312
2 x PSS 408 Speakon Cable
The D-LITE 1000 system is a convincing answer to the central
demand of entertainers, mobile DJs, smaller bands and other
users of mobile audio systems, which is for a system that is
as compact as possible and as light as possible but capable
nonetheless of delivering uncompromized audio performance.
With a total weight of less than 45 kg and fitting easily into the
tiniest of car boots, the D-Lite 1000 system provides a typically
well thoughtout „It‘s a DYNACORD“ solution to a long-felt
need.
In the ultra-compact class, this system offers exemplarily high sound
pressure levels, a substantial long throw capability, and broad, even
coverage. At the same time, it achieves brilliantly clear reproduction
with extremely low distortion and therefore a very high level of intelligibility
– even in locations with notoriously problematic acoustics.
A particularly convincing feature is the exceptionally powerful bass
reproduction all the way down to 43 Hz.
The integrated lightweight 800 W + 2 x 250W digital power amplifier
is perfectly tuned in every respect to the system and also permits
the connection of two additional D 8 satellites (for example) and a
passive Sub 112 as a bass extension. Many and various safety circuits
– such as voice coil protection, DC/HF protection, audio limiter, back
EMF protection and thermal protection – guarantee optimum operating
security.
With these characteristics, the System D-Lite 1000 is also an extremely
attractive solution for many fixed installation applications.

system
D-Lite 2000
2 x D 12
1 x PowerSub 315
2 x PSS 408 Speakon Cable
The D-LITE 2000 system has been specially designed to meet
the various needs of solo entertainers, mobile DJs and small
bands. Easy handling —thanks to the ultra-compact and lightweight
construction of the enclosures — and powerful, transparent
sound with loads of headroom combine to raise the
D-LITE 2000 to the pinnacle of excellence among professional
satellite systems.
The basic D-LITE 2000 system, comprising a PowerSub 315 and
two D 12 full-range satellites, is designed to be easily expandable,
so you can’t go wrong when it’s time to buy in more power. Up to four
satellites (two per side) and two additional passive subwoofers can
be driven efficiently and easily by the mighty PowerSub 315.
The D-LITE 2000 system is also the ideal solution for fixed installation
in a wide variety of catering establishments such as restaurants, cafes,
bars and pubs as well as in schools.
A wide assortment of installation hardware is available for positioning
the satellites, including mounting frames, wall brackets and
trussing gear.

Type / Name D 8 D 8W D 12 D 12W D 12A D 12-3 D 12-3A D 15-3
Color Black White Black White Black Black Black Black
Order.Nr D113126 D113158 D113030 D113094 D113164 D113083 D113165 D113084
Cabinet Full-Range Full-Range Full-Range Full-Range Full-Range Full-Range
Configuration Passive 2-Way Passive 2-Way Powered 2-Way Passive 3-Way Powered 3-Way Passive 3-Way
Nominal Impedance 8 Ohms 8 Ohms --- 8 Ohms --- 8 Ohms
Rated power RMS 250 W 300 W --- 350 W --- 500 W
Program power 500 W 600 W --- 700 W --- 1000 W
Peak power 1000 W 1200 W --- 1400 W --- 2000 W
Lo Amplifier
Power RMS
--- --- 350 Watts --- 350 Watts ---
Mid-High Amplifier
Power RMS
SPL 2,83V/1m
(1W/8 ohms)
Max. SPL 1m
(calc. with peak
power or measured
10% THD)
Frequency range
(-10db)
Nominal
Coverage angle
Coverage angle
1kHz -6dB
Coverage angle
10kHz -6dB
Passive crossover
frequency
Active crossover
frequency
Voice coil
tracking protection
--- --- 150 Watts --- 150 Watts ---
94 dB 98 dB 98 dB 100 dB 100 dB 100 dB
124 dB 129 dB 129 dB 131 dB 131 dB 133 dB
65Hz - 20kHz 70Hz - 18kHz 45Hz - 20kHz 70Hz - 20kHz 45Hz - 20kHz 50Hz - 20kHz
90° x 90° 80° x 40° 80° x 40° --- --- ---
--- --- --- 90° x 50° 90° x 50° 90° x 50°
--- --- --- 120° Conical 120° Conical 120° Conical
--- --- --- 700Hz / 4kHz --- 700Hz / 4kHz
--- --- 1,2kHz --- 700Hz / 4kHz ---
Halogen yes --- yes yes yes
Component High DH-3 ND2 S-8 ND2-16 DH-3 DH-3 DH-3
Component Mid --- --- --- DND 6120 DND 6120 DND 6120
Component Low DND8200-8 DL 12 BFH DL 12 BFH DL 12 BFH DL 12 BFH DND 15400
Component Sub --- --- --- --- --- ---
Connectors 1+ / 1- 1+ / 1- --- 1+ / 1- --- 1+ / 1-
Wired through --- 2+ / 2- --- 2+ / 2- --- 2+ / 2-
Connector model
Speakon
2 x NL4 MPR 2 x NL4 MPR --- 2 x NL4 MPR --- 2 x NL4 MPR
Dimensions
(WxHxD) mm
282 x 442 x 259 429,5 x 586 x 320,5 430 x 586 x 321 430 x 586 x 321 430 x 586 x 321 447 x 686 x 413
Net weight 8,8 kg 16 kg 17,5 kg 19 kg 20 kg 24 kg
Shipping weight 9,5 kg 17 kg 20,5 kg 20 kg 22 kg 26 kg
Enclosure material ABS Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene
Finish Black White Black White Black Black Black Black
Grille, Steel Powder coated Powder coated Powder coated Powder coated Powder coated Powder coated
Front b/w Acoustic Foam Acoustic Foam Acoustic Foam Acoustic Foam Acoustic Foam Acoustic Foam
Handles 1 1 1 1 1 1
Castors --- --- --- --- --- ---
Warranty 36 month 36 month 36 month 36 month 36 month 36 month

Type / Name Sub 112 Sub 115 Sub 118 PowerSub 312 PowerSub 315
Color Black Black Black Black Black
Order.Nr D113134 D113029 D113085 D113125 D113027
Cabinet Subwoofer Subwoofer Subwoofer Powered 3-Channel
Subwoofer
Configuration
Built-In
Hi-Cut Filter
Built-In
Hi-Cut Filter
Built-In
Hi-Cut Filter
Powered 3-Channel
Subwoofer
--- ---
Nominal Impedance 8 Ohms 8 Ohms 8 Ohms --- ---
Rated power RMS 400 Watts 400 W 700 W --- ---
Program power 800 Watts 800 W 1400 W --- ---
Peak power 1600 Watts 1600 W 2800 W --- ---
Lo Amplifier
Power RMS
Mid-High Amplifier
Power RMS
SPL 2,83V/1m
(1W/8 ohms)
Max. SPL 1m
(calc. with peak
power or measured
10% THD)
Frequency range
(-10db)
Nominal
Coverage angle
Coverage angle
1kHz -6dB
Coverage angle
10kHz -6dB
Passive crossover
frequency
Active crossover
frequency
Voice coil
tracking protection
--- --- --- 800 W / 4 Ohms 1000 W / 8 Ohms
2 x 500 W / 4 Ohms
--- --- --- 2 x 250 W / 4 Ohms 2 x 500 W / 4 Ohms
92 dB 99 dB 98 dB 92 dB 99 dB
124 dB 131 dB 132 dB 121 dB 129 dB
43Hz - 350Hz 55Hz - 320Hz 30Hz - 300Hz --- ---
--- --- --- --- ---
--- --- --- --- ---
--- --- --- --- ---
124 Hz 124Hz 124Hz --- ---
--- 124Hz 124Hz 70Hz/100Hz/140HZ 80Hz/100Hz/160HZ
--- yes yes --- yes
Component High --- --- --- --- ---
Component Mid --- --- --- --- ---
Component Low --- --- --- --- ---
Component Sub DND12S400 EVS 15S LFS 18700 DND12S400 LFS 1008
Connectors 1+ / 1- 1+ / 1- 1+ / 1-
Wired through 2+ / 2- 2+ / 2- 2+ / 2- --- ---
Connector model
Speakon
Dimensions
(WxHxD) mm
2 x NL4 MPR 2 x NL4 MPR 2 x NL4 MPR 1 x NL4 MPR for
Sub 112 Extension
1 x NL4 MPR for
Sub 115 Extension
545 x 380 x 445 464 x 601 x 660 547 x 724 x 658 445 x 380 x 445 464 x 601 x 660
Net weight 20 kg 34 kg 50 kg 22,5 kg 45 kg
Shipping weight 22 kg 37 kg 53 kg 27 kg 48 kg
Enclosure material Birch plywood Birch plywood Birch plywood Birch plywood Birch plywood
Finish Black 2-Comp. Paint 2-Comp. Paint 2-Comp. Paint 2-Comp. Paint
Grille, Steel Powder coated Powder coated Powder coated Powder coated Powder coated
Front b/w Acoustic Foam Acoustic Foam Acoustic Foam Acoustic Foam Acoustic Foam
Handles 2 2 4 2 2
Castors --- 4 4 --- 4
Warranty 36 month 36 month 36 month 36 month 36 month

BS-50 FB... MB ...
F212
EBK M10
RMA
PCL 1500
PCL 880
TC-02
WMK-10 TC-TV PM-TV FB-TV PCL M10
SH...
TMA
Accessories Top D 8 D 8W D 12 D 12W D 12A D 12-3 D 12-3A D 15-3
Color Black White Black White Black Black Black Black
Dust Cover SH...
SH-D8
D113143
SH-D8
D113143
SH-D 12
D113046
SH-D 12
D113046
SH-D 12
D113046
SH-D 12
D113046
SH-D 12
D113046
SH-D 15
D113097
F 212 Monitor Feet --- D113040 D113040 D113040 D113040 ---
MB D 8 UMH U-Bracket
MB D 8 UMH
D113135
MB D 8W UMH
D113160
MB 212 U-Mounting Bracket --- MB 212
D113042
--- --- --- --- ---
MB 212W
D113095
MB 212
D113042
MB 212
D113042
MB 212
D113042
MB 312 Horiz. Cluster Plate --- D113043 D113096 D113043 D113043 D113043 ---
MB 112 Eyebolt-Set M 8 ** --- D113041 D113041 D113041 D113041 ---
** MB 112 must only be used together with MB 212 due to safety reasons!
MB 200 UMH U-Bracket --- D170183 D170183 D170183 D170183 ---
MB 500 UMH U-Bracket --- --- --- --- D113099
FB... Flying Bracket FB-D8 ( D113136 ) --- --- --- --- FB-D15 ( D113100 )
FB-TV TV-Spigot D113142 --- --- --- --- D113142
TC-TV Truss > TV-Spigot D112941 --- --- --- --- D112941
PM-TV PoleMount > TV-Spigot D112942 --- --- --- --- D112942
WMK-10 Wall Mount Kit
WMK-10
D113137
WMK-10W
D113154
--- --- --- --- ---
TMA Tilt angle for UMH D112815 D112815 D112815 D112815 D112815 D112815
RMA Rotatable Kit for UMH D112807 D112807 D112807 D112807 D112807 D112807
TC-02 Truss clamp for UMH D112808 D112808 D112808 D112808 D112808 D112808
PCL-M10 Pole Mount D113116 --- --- --- --- D113116
Speaker Stand max. 50kg BS-50 ( D113045 ) BS-50 ( D113045 ) BS-50 ( D113045 ) BS-50 ( D113045 ) BS-50 ( D113045 ) BS-50 ( D113045 )
Accessories SUB Sub 112 Sub 115 Sub 118 PowerSub 312 PowerSub 315
Dust Cover SH... SH-112 ( D113144 ) SH-315 ( D113047 ) SH-118 ( D113098 ) SH-112 ( D113144 ) SH-315 ( D113047 )
PCL 880 Pole Mount fix 880mm D112461 D112461 D112461 D112461 D112461
PCL 1500 Pole Mount adjustable D113044 D113044 D113044 D113044 D113044
---
©2008 EVI Audio GmbH · Subject to change without prior notice · Printed in Germany (F&W/DR) · Order #D164626 · 02/08/7500
Bosch Communications Systems
Americas–Headquarter Americas
Telex Communications, Inc.
12000 Portland Ave South,
Burnsville, MN 55337, USA
USA–Ph: 1-800-392-3497
Fax: 1-800-955-6831
Canada–Ph: 1-866-505-5551
Fax: 1-866-336-8467
Latin America–Ph: 1-952-887-5532
Fax: 1-952-736-4212
Europe, Africa & Middle-East
Headquarter EAME
EVI Audio GmbH
Hirschberger Ring 45
D-94315 Straubing, Germany
Phone: +49 9421 706-0
Fax: +49 9421 706-265
France: EVI Audio France S.A.
Parc de Courcerin
Allée Lech Walesa
F 77185 Lognes, France
Phone: +33 1-6480-0090
Fax: +33 1-6006-5103
Asia & Pacific Rim–Headquarter Asia
Singapore: Telex Communications
(SEA) Pte Ltd
38C Jalan Pemimpin
Singapore 577180
Tel: (65) 6319 0621
Fax: (65) 6319 0620
Japan: EVI Audio Japan Ltd.
5-3-8 Funabashi, Setagaya-Ku
Tokyo, Japan 156-0055
Phone: +81 3-5316-5020
Fax: +81 3-5316-5031
Hong Kong:
Telex EVI Audio (HK) Ltd.
Unit 5,1/F, Topsail Plaza
11 On Shum Street
Shek Mun,Shatin HK
Phone: +852 2351-3628
Fax: +852 2351-3329
Bosch Communications Systems
Telex EVI Audio
(Shanghai)Co., Ltd.
Room 3105-3109
Tower 1 Office Building
218 Tian Mu Xi Rd.
Shanghai, China
Postal Code: 200070
Tel: +86 21-6317-2155
Fax : +86 21-6317-3025

Philosophy
Professional sound reinforcement requires maximum perfomance
and high sound pressure levels for a wide variety of
touring and installation applications. Universal loudspeaker
functionality is therefore most important to meet the ever
changing demands without effort.
Both acoustically and mechanically, VariLine enclosures have
been uncompromisingly designed and optimized for multifunctional
application. Innovative circuits provide maximum
reliability and protection of all loudspeaker components.
Engineered & made in Germany. VariLine loudspeakers feature
premium components only: lightweight high power neodymium
transducers, rotable CAD optimized CD horns, all-electronic
protection circuits and passive true-phase crossovers
provide outstanding reliability and linear reproduction even in
highly critical applications. Comprehensive mounting and
rigging accessories facilitate professional handling and secure,
easy installation of VariLine loudspeakers. Visually attractive
yet low-key, these enclosures are highly recommended for
demanding ambiences.

Cabinet Design
VariLine enclosures are made from extremely rugged multiply birch
wood and two-pot finished to withstand touring and handling stress.
The front is protected by a sturdy powder-coated steel grille lined with
high quality acoustic foam and, the company logo is 90° rotatable for
horizontal use. 12“ and 15“ models feature asymmetric enclosures to
facilitate the use as floor monitors and cluster arrangement.
Transducer
VariLine loudspeakers are equipped with extremely low-distortion
state-of-the-art drivers only to provide linear response, wide dynamic
range and high power handling. The 6“, 12“ and 15“ transducers feature
neodymium magnets significantly contributing to the light weight
of VariLine enclosures.
Horn
The large format VariLine constant directivity HF horns have been
optimized with advanced CAD software resulting in exemplary low distortion
and directivity way down beyond the MB range. For horizontal
applications, they are rotatable by 90°. The smaller enclosures are
equipped with Electro-Voice DH3 titanium dome drivers, the VL 122
and larger models feature Electro-Voice ND6 neodymium drivers with
3“ voice coils and 1.4“ exits. These advantageous horn/driver configurations
provide crisp and powerful high-resolution HF reproduction.
Crossover
VariLine crossovers use selected high-quality components only for
signal processing and the innovative DYNACORD protection circuits:
the all-electronic VOICE COIL TRACKING PROTECTION and halogen
protectors prevent thermal overload. For maximum dynamics,
VariLine loudspeakers can be driven by extremely powerful amplifiers
without voice coil damage - even when operating errors occur.
Thermal overload triggers a 'soft' power reduction without the
switching noise of conventional protection circuits. Additionally, 12“
and 15“ models feature selectable bi-amp operation .

Drive
With DYNACORD PowerH amplifiers and IRIS-Net, VariLine systems
can be networked providing comprehensive remote control and permanent
supervision. Fully configured presets are available for a variety
of system setups containing loudspeaker monitoring and linear
phase FIR (Finite Impulse Response) filtering while others presets
provide FIR floor monitor optimizing. Even very large systems require
one mouse click only for impedance sweep measuring and loudspeaker
connection testing.
Of course, IRIS-Net-controlled systems are also user-configurable.
Presets are available for conventional digital controllers as well and,
EASE and Ulysses data files facilitate demanding simulations quickly
and precisely.
Flying brackets
Flying brackets are optional accessories for precise loudspeaker
aiming at the listening areas. In installation applications, the bracket
can be equipped with truss clamps for flying while an adapter enables
stand mounting. A TV spigot enables easy changing from truss to
stand mounting while additional adapters provide maximum flexibility
for a comprehensive range of applications (see pp. 15).
Installation hardware
A wide range of installation hardware is available for VariLine fullrange
cabinets providing classic three-point eyebolt flying, wall or ceiling
bracket mounting and, even more convenient, three-level adjustable
mounting (see pp. 15).

Highest quality speech and music
Applications
Theatre front fill
Multimedia
Satellite and delay systems
VL 62
VL 262

VL 62 and VL 262
The models VL 62 and VL262 are very compact 2-way fullrange
high power cabinets for a wide variety of mobile and
installation applications. High sensitivity (94dB/97dB @ 1W/1m)
and power handling makes them stand out in their class.
Extremely low distortion DND 6130-16 neodymium drivers
handle lows and mids while a 90° x 40° HPT94 constant directivity
horn radiates the highs. It is driven by the brilliantly clean
Electro-Voice DH3 and easily 90° rotatable for horizontal
applications. Recessed SPEAKON connectors enable positioning
close to walls, and two lateral M10 inserts are provided
for mounting the FB... pivot bracket. MB and MB UMH
brackets can be attached to the top or bottom via M10 inserts
while four M6 inserts are provided on the back for other wall
mount brackets.
A rugged, water-repellent cover is available as accessory.
VL 62
VL 262

VL 122, VL 152 and VL 212
The 12“ and 15“ VariLine models are high power 2-way cabinets
exclusively equipped with high-quality neodymium components.
These lightweight champs feature impressively high
power handling for superior sound pressure levels.
Large format HF horns coupled to Electro-Voice ND6 drivers
provide balanced directivity well below the crossover frequency
and clear, detailed HF reproduction. In horizontal applications –
especially when used as monitor and in high-quality installations
– mid and high frequency radiation can be optimized by
horn rotation. The 12“ and 15“ models are switchable from fullrange
mode to bi-amp operation. Their asymmetrical enclosure
design is ideal for floor monitor use and cluster arrangements.
For the range of mounting and flying hardware refer to page 15.
VL 122
VL 152
VL 212
VL 152 with MB 152 UMH

VL 122
Applications
Highest quality speech and music
High power monitoring
Front and side fill
Club systems with subwoofers
Delay systems
VL 152
VL 212

SUB 18 and SUB 28
The vented SUB 18 and SUB 28 direct radiators have been
designed for subwoofer use in active multiway systems. The
superior transient response of the classic bass reflex construction
is also well suited for medium to large bass arrays.
The premium 700W RMS long excursion woofers feature extremely
low THD, and the reliable, all-electronic Voice Coil
Tracking Protection prevents thermal overload of the 100mm
sandwich voice coils.
For maximum dynamics, the SUB models can be driven by
extremely powerful amplifiers; thermal overload triggers a virtually
inaudible 'soft' power reduction. The 18mm multiply birch
wood enclosures feature a rugged two-pot structured finish.
The woofers are damage and weather protected by a sturdy
powder-coated steel grille lined with high quality acoustic
foam. Wheel kits with four 100mm factory assembled 'Blue
Wheels' are optionally available. These are mounted to the
back to provide easy and convenient transport .
The SUB 28 is switchable from 1 x 4 ohms to 2 x 8 ohms mode
where woofer A is connected to the Speakon pins 1+/1- and B
to pins 2+/2-.
When driven by DYNACORD CL, LX or Power-H series amplifiers
a single 4-conductor loudspeaker cable is required to
feed both woofers from amplifier channel A (channel B output
is also present at channel A pins 2+/2- ).
SUB 18
WK 500 # D113150 for SUB 18
WK 600 # D113149 for SUB 28
SUB 28

SUB 28
SUB 18

VL 212 with SUB 28
VL 122 with SUB 18

VL 122 / SUB 18 with FIR-Filter
VL 122 and SUB 18
Active high power 2 or 3-way combination for small to medium
bistro and club sound reincorcement. With FB-VL122 flying
brackets, the satellites can be conveniently pole-mounted on
the subwoofers and precisely aimed at the target areas. Highperformance
CL and LX series amplifiers and the DSP 244
controller and / or Power-H amplifiers with RCM 26 module are
recommended as drive units.
VL 212 / SUB 28 with FIR-Filter
VL 212 and SUB 28
Active high power 2 or 3-way combination with maximum lomid
sound pressure levels for medium FOH applications.
Individual all-electronic Voice-Coil-Tracking Protections prevent
thermal overload of the transducers permitting the use of
the high-performance DYNACORD Power-H series H 2500
and H 5000 amplifiers for maximum dynamics.

VL 62 with WMK-10
VL 262 with FB-VL 262, FB-TV and TC-TV
VL 122 with PCL 1500 and SUB 18
VL 152 with MB 152 UMH

Accessories
Cabinet
Order #
Dust-
Cover
Eyebolt-
Kit 3pcs
Wall-
Mount
U-Mount
Bracket
UMH-Mount
Bracket
Tilt-
Angle
Rotor
Plate
Bracket
> Truss
VL 62
D113127
VL 262
D113101
VL 122
D113103
VL 152
D113104
VL 212
D113133
SH-VL 62
D113145
SH-VL 262
D113117
SH-VL 122
D113118
SH-VL 152
D113119
SH-VL 212
D113147
EBK M10
D113155
EBK M10
D113155
EBK M10
D113155
EBK M10
D113155
EBK M10
D113155
WMK-10
D113137
WMK-10
D113137
---
---
---
MB 62
---
D113138
---
MB 262 UMH
D113113
---
MB 122 UMH
D113114
---
MB 152 UMH
D113115
MB VL 212
---
D113153
---
TMA
D112815
TMA
D112815
TMA
D112815
---
---
RMA
D112807
RMA
D112807
RMA
D112807
---
TC-02
D112808
TC-02
D112808
TC-02
D112808
TC-02
D112808
---
Cabinet
Order #
FB > fix
Truss
Truss
Clamp
FB > fix
Stand
Stand
Adapter
FB > variable
Truss / Stand
FB-TV
FB >
Truss
FB >
Stand
VL 62
D113127
VL 262
D113101
VL 122
D113103
VL 152
D113104
VL 212
D113133
FB-VL 62
D113140
FB-VL 262
D113101
FB-VL 122
D113111
FB-VL 152
D113112
FB-VL 212
D113152
TC-02
D112808
TC-02
D112808
TC-02
D112808
TC-02
D112808
TC-02
D112808
FB-VL 62
D113140
FB-VL 262
D113110
FB-VL 122
D113111
FB-VL 152
D113112
FB-VL 212
D113152
PCL M10
D113116
PCL M10
D113116
PCL M10
D113116
PCL M10
D113116
PCL M10
D113116
FB-VL 62
D113140
FB-VL 262
D113110
FB-VL 122
D113111
FB-VL 152
D113112
FB-VL 212
D113152
FB-TV
D113142
FB-TV
D113142
FB-TV
D113142
FB-TV
D113142
FB-TV
D113142
TC-TV
D112941
TC-TV
D112941
TC-TV
D112941
TC-TV
D112941
TC-TV
D112941
PM-TV
D112942
PM-TV
D112942
PM-TV
D112942
PM-TV
D112942
PM-TV
D112942

Type / Name VL62 VL262 VL122 VL152 VL212 Sub18 Sub28
Order-# D113127 D113101 D113103 D113104 D113133 D113129 D113130
Cabinet Full-Range Full-Range Full-Range Full-Range Full-Range Subwoofer Subwoofer
Configuration passive 2-Way passive 2-Way passive 2-Way passive 2-Way passive 2-Way Vented Direct Vented Direct
or Biamped Mode or Biamped Mode or Biamped Mode Radiator Radiator
Nominal Impedance 16 ohms 8 ohms 8 ohms 8 ohms 4 ohms 8 ohms 4 ohms**
Rated Power RMS 150 watts 300 watts 400 watts 500 watts 800 watts 700 watts 1400 watts
Program Power 300 watts 600 watts 800 watts 1000 watts 1600 watts 1400 watts 2800 watts
Peak Power 600 watts 1200 watts 1600 watts 2000 watts 3200 watts 2800 watts 5600 watts
SPL 2,83 V/1m 94 dB* 97 dB 99 dB 100 dB 105 dB 98 dB 104 dB
max. SPL 1m
(calc. with Peak) 122 dB 125 dB 131 dB 133 dB 137 dB 132 dB 138 dB
Freq. Range (-10 dB) 90Hz - 20Hz 90Hz - 20Hz 60Hz - 20Hz 50Hz - 20Hz 80Hz - 20Hz 35Hz - 700Hz 35Hz - 700Hz
Coverage Angle nom. 90° x 40° 90° x 40° 90° x 45° 90° x 45° 90° x 45° --- ---
Passive
X-Over Frequency 2,2 kHz 2,2 kHz 1,5 kHz 1,5 kHz 1,5 kHz Hi-Cut Hi-Cut
VCT Protections Halogen Halogen yes yes yes yes yes
Components HIGH Ev DH 3 Ev DH 3 Ev ND6-8 Ev ND6-8 Ev ND6-8 --- ---
Order-# D353078 D353078 D361493 D361493 D361493 --- ---
Components LOW DND 6130-16 2x DND 6130-16 DND 12350 DND 15400 2x DND 12350 LFS 18700 2x LFS 18700
Order-# D366420 D366420 D366559 D366303 D366559 D366304 D366304
Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR 2x NL 4MPR 2x NL 4MPR 2x NL 4MPR 2x NL 4MPR 2x NL 4MPR
Pin Wiring
Normal/Fullrange 1+/1- 1+/1- 1+/1- 1+/1- 1+/1- 1+/1- 1+/1-
Pin Wiring Biamped HF --- --- 2+/2- 2+/2- 2+/2- --- Speaker A 1+/1-
Pin Wiring Biamped LF --- --- 1+/1- 1+/1- 1+/1- --- Speaker B 2+/2-
Dimensions
(WxHxD) mm 217x 379x 230 217x 543x 230 385x 715x 374 441x 780x 407 385x 1035x 374 505x 805x 570 605x 1205x 675
Net Weight 8 kg 10 kg 24 kg 26 kg 34 kg 49 kg 82 kg
Enclosure Material Birch Plywood Birch Plywood
Finish Black 2-Component Structure Paint Black 2-Component Structure Paint
Grille Powder Coated Steel, Acoustic Foam Powder Coated Steel
© EVI Audio GmbH · Art.Nr. D164579 · Printed in Germany (DOPF/DR) · 5.000/06/08 · www.boschcommunications.com · Subject to change without prior notice!
Warranty 36 months 36 months 36 months 36 months 36 months 36 months 36 months
* 4,0 V = 1W @ 16 ohms **switchable 1x 4 ohms / 2x 8 ohms
Americas
Bosch Communications Systems
12000 Portland Ave South
Burnsville, MN 55337, USA
USA: Phone: 1-800-392-3497
Fax: 1-800-955-6831
Canada: Phone: 1-866-505-5551
Fax: 1-866-336-8467
Latin America: Phone: 1-952-887-5532
Fax: 1-952-736-4212
Europe, Africa & Middle-East Germany: Bosch Communications Systems
EVI Audio GmbH
Hirschberger Ring 45
D-94315 Straubing, Germany
Phone: +49 9421 706-0
Fax: +49 9421 706-265
France:
EVI Audio France S.A.
Parc de Courcerin
Allée Lech Walesa
F 77185 Lognes, France
Phone: +33 1-6480-0090
Fax: +33 1-6006-5103
Asia & Pacific Rim Japan: EVI Audio Japan Ltd.
5-3-8 Funabashi, Setagaya-Ku
Tokyo, Japan 156-0055
Phone: +81 3-5316-5020
Fax: +81 3-5316-5031
China:
Telex EVI Audio (Shanghai) Ltd.
Room 2210-2215
Tower B, Far East International Plaza
No. 317, Xianxia Road
Shanghai, China, PC: 200051
Phone: +86 (21) 6235-1677
Fax: +86 (21) 6235-1676
Hong Kong:
Telex EVI Audio (HK) Ltd.
Unit 5,1/F,Topsail Plaza
11 On Shum Street
Shek Mun,Shatin HK
Phone: +852 2351-3628
Fax: +852 2351-3329
Singapore: Telex Pte. Ltd.
3015A Ubi Road 1, 05-10
Kampong Ubi Industrial Estate
Singapore 408705
Phone: +65 6746-8760
Fax: +65 6746-1206