Mission FS2-AV Loudspeaker System Mission FS2 ... - Supersonido

PRODUCT INFORMATION GUIDE
Construction
Mission FS2-AV Loudspeaker System
Enclosure
Grille
Mission FS2 nxt Satellites
Injection moulded, high impact ABS
ATM (Acoustically Transparent Membrane)
Electrical
Sound Panel
Exciter
Sandwich construction of 2mm foam core with woven
glass fibre outer skin.
Twin 25mm, ferrofluid damped 8-point coupler exciters
with neodymium magnets
Specifications
Enclosure Type
Frequency Response ±3dB
Crossover Frequency
Sensitivity SPL/m/2.83V
Nominal Impedance
Recommended Amplifier
Cabinet Dimensions (H x W x D)
Weight
Finish
Closed back
285Hz-20kHz
235Hz
86 dB
8 Ohms
30 - 75 W/Ch
315 x 135 x 45 (mm) 12.4 x 5.3 x 1.77 (inches)
710g (1.5 pounds)
White and Neutral
Features
Benefits
• Slim, compact enclosure Unobtrusive in room
• Flexible mounting arrangements Wall, corner or freestanding
• Patented nxt technology even distribution of sound throughout the room
• High subjective efficiency equivalent to extra power for amplifier - greater
dynamics
• Fully shielded design avoids electromagnetic interference with TV sets
• Light but rigid cabinet cabinet will not store energy, fast responsive sound
• Rear tapered enclosure permits easy corner mounting in horizontal or vertical
orientation
• Universal stand facilitates desktop or centre channel placement
Setting Up
• RUN IN for a minimum of 24 hours
• Fix securely to wall or supplied desk stand
• Position above ear height when used as a rear speaker.

Mission FS2-S Active Sub-Woofer
Construction
Enclosure
15mm MDF panels in asymmetric formation with optimal bracing
and damping.
Electrical
L.F. Unit
Cross-Over
Terminals
17cm (6 ½") treated fibre cone with shielded magnet.
Integral active design with overdrive limiter.
Loudspeaker level five channel inputs – dedicated LFE
line level input
Loudspeaker level five channel outputs. Link to second
subwoofer.
Specifications
Enclosure type
Low frequency contour
Frequency Response ±3dB
Crossover Frequency
Amplifier
Cabinet Dimensions (H x W x D)
Finish
Reflex
55Hz +3dB –3dB
48Hz - 180Hz
235Hz
150W (PPMS), 55 Watts (RMS) with overdrive protection
520 x 318 x 252 (mm) 20.5 x 12.5 x 9.9 (inches)
Black

Mission FS2-AV Loudspeaker System
Mission FS2 Satellite
Using ultra-thin lightweight panels, the combination of compact size and versatile
integral mounting makes FS2 an ideal solution for homes, offices and apartments
where discreet, elegant audio & audio visual systems are required.
• Precision moulded cabinet in state-of-the-art polymer composite provides a
rugged enclosure with considerable structural integrity.
• Full magnetic shielding allows placement in close proximity to televisions, video
and computer monitors.
• Hexagonal cabinet styling detail facilitates corner mounting whilst retaining very
close proximity to the rear wall. The reduction in parallel surfaces noticeably
reduces the build up of internal standing waves hence giving a more neutral
sound.
• The integral cradle and modular construction of the satellite facilitates wall
mounting in a most discreet and elegant manner. An assortment of screw fixing
points allows the satellite ‘cradle’ to be fixed to a variety of surfaces easily and
securely.
• Unlike conventional speakers the FS2 satellite integrates its acoustic output with
room boundaries in a natural manner. Whether mounted in corner, wall or freespace
locations the subjective balance is even across the frequency bandwidth.
• NXT technology provides even sound pressure levels throughout the room with
natural stereo presentation for listeners no matter where they are seated. The
low rate of fall off of sound pressure with distance gives high subjective
sensitivity which, coupled with an almost purely resistive easy amplifier load,
allows the use of modest amplification.

Mission FS2-S Subwoofer
The Mission FS2-S active subwoofer is designed to provide a solid low-frequency
foundation for music and films from a compact and discreet enclosure. Its integral
150W peak power amplifier in combination with an efficient and powerful 17cm,
magnetically shielded bass unit gives authority and impact to bass transients.
• Very compact, yet high performance from actively driven and equalised 17cm LF
drive unit.
• Stylish, discreet asymmetric enclosure allows subwoofer location in any corner
or along any wall in vertical or horizontal format.
• The optimally damped and braced enclosure features asymmetric panels for
minimum standing wave formation, and a downward facing gas flowed port for
low distortion bass extension.
• Ultra-low distortion, integral 150W (peak power) amplifier and crossover is
dedicated to the high performance driver for optimum low frequency
performance with full overload and thermal protection.
• Adjustable level and bass contour controls enable seamless integration with the
satellites and offer user adjustment of sound balance to taste.
• Terminal connections match High Level speaker outputs, in addition to a
dedicated LFE subwoofer output, to suit connection to any amplifier or AV
receiver. Satellite outputs are taken directly from the subwoofer for easy user
installation.
• Dedicated subwoofer link allows simple attachment of a second subwoofer for
enhanced bass output in larger rooms.