DECLARATION OF PERFORMANCE - Tarkett
DECLARATION OF PERFORMANCE - Tarkett
DECLARATION OF PERFORMANCE - Tarkett
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>DECLARATION</strong> <strong>OF</strong> <strong>PERFORMANCE</strong><br />
No. 0200-0011-DoP-2013-07<br />
1. Unique identification code of the product-type:<br />
Essenza 2.5 mm<br />
2. Type number allowing identification of the construction product:<br />
1805, 14807<br />
3. Intended use:<br />
Linoleum Floor covering for indoor application in accordance with the harmonised standard<br />
EN 14041:2004<br />
4. Name and contact address of the manufacturer:<br />
<strong>Tarkett</strong> S.p.A., Via Sant'Anna 6 - 05035 Narni Scalo TR- ITALY<br />
5. Name and contact address of the authorised representative:<br />
Not applicable<br />
6. Systems of assessment and verification of constancy of performance:<br />
System 3: Reaction to fire<br />
7. Declaration of performance concerning a construction product covered by the<br />
harmonised standard:<br />
Reaction to fire: La.P.I., notified body n° 0987 performed and issued the initial testing<br />
report n° 861.0DC0050/11 according to system 3<br />
8. Declaration of performance concerning a construction product for which a<br />
European Technical Assessment has been issued:<br />
Not applicable<br />
9. Declared performance:<br />
Essential characteristics Performance Harmonised technical<br />
specification<br />
A – Reaction to fire<br />
B – Content of<br />
pentachlorophenol<br />
C – Formaldehyde emission<br />
D – Water-tightness<br />
E – Slipperiness<br />
F – Antistatic performance<br />
G – Electrical behaviour<br />
H – Thermal resistance<br />
C fl -s1 Glued with acrylic glue<br />
on A1fl or A2fl substrate<br />
NPD<br />
E1<br />
NPD<br />
DS<br />
Pass<br />
>10^9 Ω<br />
Approx. 0.015 m 2 K/W<br />
EN 14041: 2004<br />
Page 1 of 2
10. The performance of the product identified in points 1 and 2 is in conformity with the<br />
declared performance in point 9.<br />
This declaration of performance is issued under the sole responsibility of the manufacturer<br />
identified in point 4.<br />
Signed for and on behalf of the manufacturer by:<br />
Daniele Guerra, Plant Manager<br />
Name and function<br />
Narni Scalo, Italy 01-01-2014<br />
Place and date of issue<br />
Signature<br />
7<br />
REACH information: Not applicable<br />
_______________<br />
Page 2 of 2