PV Catalogue : Schneider Electric renewable energies catalog

More documents

Recommendations

Info

59 Xantrex C Series Charge Controllers Electrical specifications Models C35 PWM C40 PWM C60 PWM Voltage configurations 12 and 24 Vdc 12, 24, and 48 Vdc 12 and 24 Vdc Max. PV open circuit array voltage 55 Vdc 125 Vdc 55 Vdc Charging / load current (@ 25°C) 35 Adc 40 Adc 60 Adc Max. short circuit current 85 A 85 A 85 A Max. voltage drop through controller 0,30 V 0,30 V 0,30 V Total operating consumption 15 mA 15 mA 15 mA Total idle consumption 3 mA 3 mA 3 mA Recommended breaker size 60 A rated at 100% continuous duty 60 A rated at 100% continuous duty 60 A rated at 100% continuous duty Recommended wire size 6 AWG rated at 90°C 6 AWG rated at 90°C 6 AWG rated at 90°C Lead acid battery settings Adjustable Adjustable Adjustable NiCd battery settings Adjustable Adjustable Adjustable Load control mode Low voltage reconnect – adjustable (sticker provided with unit) all models Low voltage disconnect – user selectable manual or automatic reconnection – (includes warning flash before disconnect and provides a one time, user selected grace period) all models General specifications Enclosure type Indoor, ventilated, powder coated steel Indoor, ventilated, powder coated steel Indoor, ventilated, powder coated steel with 2 cm and 2.5 cm knockouts with 2 cm and 2.5 cm knockouts with 2 cm and 2.5 cm knockouts Weight 1.2 kg (2.65 lb) 1.4 kg (3.09 lb) 1.4 kg (3.09 lb) Dimensions (H x W x D) 20.3 x 12.7 x 6.4 cm 25.4 x 12.7 x 6.35 cm 25.4 x 12.7 x 6.35 cm (7.99 x 5 x 2.52") (10 x 5 x 2.5") (10 x 5 x 2.5") Shipping weight 1.4 kg (3.09 lb) 1.6 kg (3.53 lb) 1.6 kg (3.53 lb) Shipping dimensions (H x W x D) 31.5 x 17.8 x 6.4 cm 31.5 x 17.8 x 6.4 cm 31.5 x 17.8 x 6.4 cm (12.4 x 7.01 x 2.52") (12.4 x 7.01 x 2.52") (12.4 x 7.01 x 2.52") Specified temperature range 0°C to 40°C 0°C to 40°C 0°C to 40°C Mounting Vertical wall mount – indoor only Vertical wall mount – indoor only Vertical wall mount – indoor only Altitude – operating 4.572 m 4.572 m 4.572 m Altitude – non-operating 15.240 m 15.240 m 15.240 m Warranty Two years Two years Two years Part number C35, C40, C60 – Controllers Features and options CM – Front display panel CM/R-50, CM/R-100 – Remote display panel BTS – Battery temperature sensor Regulation method Solid state, three-stage (bulk, absorption, and float), pulse width modulation Field adjustable control setpoints Two user adjustable voltage setpoints for control of loads or charging sources – settings retained if battery is disconnected Display panel CM, CM/R-50, or CM/R-100 – optional LCD – backlit, alphanumeric display showing battery voltage, DC amperage, cumulative amp hours, and amp hours since last reset – remote includes 15 m or 30,5 m cable Equalization charge User selectable manual or automatic equalization – every 30 days Battery temperature sensor BTS – optional remote battery temperature sensor for increased charging precision Regulatory approvals Safety UL Listed to UL1741 and CSA 14; CE Marked for the Low Voltage Directive EMC FCC and Industry Canada Class B, CE Marked for the EMC Directive Specifications are subject to change without notice.
Solar charge controller Schneider Electric Xantrex C Series Controller The Schneider Electric Xantrex C35 PWM and C60 PWM are field configurable for 12- and 24- Vdc operation. The Schneider Electric Xantrex C40 PWM may be configured for 12-, 24-, or 48- Vdc operation. All can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED. Features • Silent, pulse width modulated microprocessor control (helping to maximize battery life) • Field adjustable voltage and battery type set points • Electronic protection against short-circuit, overload, over-temperature, and reverse polarity conditions C Series • CM: Cumulative amp hour meter • CM/R: Remote cumulative amp hour meter (available in 50 or 100 foot lengths) • BTS: Battery temperature sensor Optional Accessories: CM and CM/R Digital Meter or Remote Display This digital meter mounts onto the front of a charge controller or as a remote it can be installed up to 31 m away. It displays volts, amps, and resettable cumulative amp hours for a solar array, DC loads, or diversion loads, depending on the application. The CM/R comes with 15 m or 31 m communication cable for remote installation. Off-grid and backup 60
Page 1:
Schneider Electric renewable energi
Page 4 and 5:
3 The history of Schneider Electric
Page 6 and 7:
5 Schneider Electric Professional I
Page 8 and 9:
7 Basic grid-tie system A basic gri
Page 11 and 12: String inverter solutions 10
Page 13 and 14: Solar inverters SunEzy VDE, RD, DK
Page 15 and 16: Solar inverters SunEzy VDE, RD, DK
Page 17 and 18: Solar inverters Xantrex GT Series
Page 19 and 20: Solar inverters Xantrex GT Series
Page 21 and 22: Solar inverters Available Q1 2011 S
Page 23: Solar inverters Xantrex GT Series
Page 26 and 27: 25 Xantrex GT30 E Inverter Electri
Page 28 and 29: 27 Xantrex GT30 Inverters Electric
Page 30 and 31: 29 Xantrex GT100 E Inverter Electri
Page 32 and 33: 31 Xantrex GT100 and GT250 Inverte
Page 34 and 35: 33 Xantrex GT250 E, GT500 E, and G
Page 36 and 37: 35 Xantrex GT500 Inverters Electri
Page 38 and 39: 37 * * PV BOX Europe Additional Fea
Page 40 and 41: 39 Turnkey solutions Comprehensive,
Page 42 and 43: 41 Basic off-grid system With an of
Page 45: Off-grid and backup products and so
Page 48 and 49: 47 Xantrex TR Series Inverter/Char
Page 51 and 52: Solar inverter/chargers Schneider E
Page 53 and 54: Solar inverter/chargers Xantrex XW
Page 55 and 56: Solar charge controller Schneider E
Page 57 and 58: Solar charge controller Schneider E
Page 59: Solar charge controller Schneider E
Page 64 and 65: 63 Xantrex Gateway Electrical spec
Page 66 and 67: 65 > Accessories Battery Temperatur
Page 68 and 69: 67 Alternating current (AC) The typ
Page 70: 69 At Schneider Electric Renewable
show all

PV Catalogue : Schneider Electric renewable energies catalog

Create successful ePaper yourself

Delete template?

Save as template?