Bid Document 1

Schedule - G
Name Of Work :- LT/HT Line shifting work at Dabok - Mavli - Fatehnagar - Chittorgarh Road (SH-9) under Distt.
Udaipur.(PART - I)
S.
NO.
BSR
CODE
DESCRIPTION QTY UNIT RATE AMOUNT
PART –A: (B.S.R ITEMS BASED ON PWD ELECTRIC BSR 2008)
1 E210300 Supply and erection of P.C.C./R.C.C. pole as per
REC manual no 15/1979 conforming to IS:
2905/1966 as per requirement of sec3 in
alignment, including excavation of pit and back
filling with stone aggregate/boulders and soil in
0.45m consolidating each deposited layer of 0.45m
by ramming and watering etc complete in all
respect
(a) E210301 8.0 Mtr long as per Discom specification 80 Each 2109.00 168720.00
(b) E210302 9.0 Mtr long as per Discom specification 20 Each 2926.00 58520.00
2 E210400 Supply and eraction of GI stay set as per Discom
specification complete with long stay rod with
anchor plate including stay clamps turn buckle and
G.I stay wire tightened through strain insulator, in
cement concrete 1:3:6 including excavation of pitre-filling
etc as reqd.
(a) E210401 Stay set of dia 20mm,2.4 m long stay rod and 20 Each 801.00 16020.00
anchor plate 380x380x6.4mm
(b) E210402 Stay set of dia 16mm,1.8m long stay rod and 10 Each 656.00 6560.00
anchor plate 300x300x6.4mm
3 E210500 Supply and fixing of cross arms as per Discom
specification, made out from angle iron 50mmx
50mmx6mm having 'D' support for each insulator
including all necessary nuts,bolts, holding clamp of
50x6mm flat etc as reqd. on existing pole or on
wall and special accessories for XLPE insulated
ABC overhead cable like I- hook, Dead End clamp
assembly, Suspension clamp assembly as
required
(a) E210501 For 2 wire system 10 Each 200.00 2000.00
(b) E210502 For 4 wire system 10 Each 400.00 4000.00
(c) E210503 For 2 wire ABC system 20 Each 586.00 11720.00
(d) E210504 For 4 wire ABC system 20 Each 689.00 13780.00
4 E210600 Supply and fixing of LT porcelain pin insulator as
per IS 1445-1997 suitable for working voltage 1100
volts including all accessories like hot dip GI forged
spindle of 260mm long and nuts etc as reqd as per
Discom specification.
(a) E210602 105mm x 80mm 40 Each 40.00 1600.00
5 E210700 Supply and fixing of porcelain shackle insulator as
per IS:1443 1979 suitable for working on 1100
volts including hot dipped GI accessories and
heavy duty hardwares etc as required as per
Discom specification.
(a) E210702 100mm x 110mm 40 Each 68.00 2720.00
6 E210900 Supplying and drawing overhead steel core
Aluminium conductor (ACSR) ISI marked(IS 398
part II-1996) on existing cross arms through
insulator with all necessary T&P required including
binding and twisting etc. complete in all respect as
required as per Discom specification.
(a) E210901 30 Sqmm of (6+1) 2.59mm (Weasel) 200.00 P.Mtr 22.00 4400.00
(b) E210902 50 Sqmm of (6+1) 3.35 mm (Rabbit) 200.00 P.Mtr 37.00 7400.00
(c) E210905 100 sqmm of (6/4.72 mm+1/1.57 mm) (Dog) 5000.00 P.Mtr 69.00 345000.00

7 E211100 Supply and fixing of 'V' type cross arms made of
MS channel on the existing poles complete
including all necessary nut and bolt etc with
clamps as per Discom specification.
(a) E211101 11kV cross arms (75 x 40 x 6.8 kg/mtr) 15 Each 544.00 8160.00
8 E211200 Supply and fixing of top hamper on the existing
pole complete including nut bolts etc as required.
(a) E211210 Vertical type
(i) E211211 11 kV (.7m long) (65 x 65 x6mm angle) 15 Each 285.00 4275.00
9 E211300 Supply and fixing of Cross arms made out from
100 x 50 x 6mm MS channel complete in all
respect as required including nuts and bolts and
clamp as per Discom specification etc as required.
(a) E211302 2 x 1.3 m long 20 Each 1138.00 22760.00
10 E211400 Supply and fixing of 50 x 6mm MS strip having two
holes of 5/8" dia with cut for providing 6/8 SWG GI
wire.
(a) E211402 100 mm long 50 Each 13.00 650.00
11 E211500 Supply and fixing of a set of 4 nos V cross arm
1 Each 2030.00 2030.00
made out of MS angle with bracing of MS flat 50 x
6 mm with nuts and bolts (as per specification of
Discom ) for 11 kV made up of 65 x 65 x6mm MS
angle.
12 E211600 Supply and fixing of pilot patti made from MS flat (
as per specification of Discom) and suitable for
PCC pole (50 x 6mm)/ R.S. joist ( 50 x 6mm).
50 Each 16.00 800.00
13 E211700 Supply and fixing 11kV pin insulator( IS 731/ 1971) 165 Each 108.00 17820.00
with minimum creepage distance of 300mm on
existing bracket including all accessories like hot
dipped GI spindle and nuts etc (as per
specificationof Discom).
14 E211800 Supply and fixing 11kV Disc insulator (IS 731/
1971) with minimum creepage distance of 300mm
on existing bracket including all accessories like
hot dipped GI spindle and nuts etc (as per
specificationof Discom).
(a) E211801 B & S type hardware 270 Each 426.00 115020.00
(b) E211803 B & S disc insulator 540 Each 319.00 172260.00
15 E211900 Supply and fixing of PG clamps on overhead
lines/jumpers, made of aluminium alloy 4600 of IS
617-1994 (with latest amendment if any) with steel
nut and bolts conforming to IS 1363-1992 & IS
1367/1979-80 (with latest amendments if any) all
ferrous metal pa
(a) E211901 Dog 500 Each 42.00 21000.00
(b) E211902 Weasel/Rabbit 150 Each 31.00 4650.00
16 E212000 Supplying and laying earth conductor from
200.00 P.Mtr 17.00 3400.00
electrode to source in ground/ floor/ wall on iron
saddles etc as required including making
connection duly soldered or crimped 7/3.15 mm
hot dipped stay wire.
17 E212100 Supplying and fixing of straight type 1.5 mtr long
cross arms made out from MS angle of size 50 x
50 x 6mm for guarding on existing poles complete
including 2 nos 150mm long MS flat of size 50 x
6mm bend into shape at both the ends duly welded
clamps, nut and bolt etc as required.
35 Each 257.00 8995.00

18 E212200 Supply and fixing of piller box made of 2mm CRCA
MS sheet of 415 volts 3 phase 4 wire triple pole
and neutral type, complete in all respect as
required. Including knife switch, HRC fuses with
copper one piece U contacts base, brass studs
and nuts, copper busbar for main and
interconnection, MS angle frame of 50 x 50 x 6 mm
grouted with C.C. of M-10 grade to achieve the
height of 1.5 feet above the road level suitable for
four outgoing.(400Amp capacity)
19 E212300 Supply and fixing 100 Amp, 11kV Horn gap fuse
set IS 9385 on existing DP structure with 6 nos
24kV/22kV post insulator (IS:5350 part III), hot
dipped hard ware,fuse wire of required size etc.
complete in all respect as per specification given
by Discom. (Type tested by ERDA/CPRI)
15 Each 20475.00 307125.00
15 Each 6050.00 90750.00
20 E212400 Supply and fixing of 11kV, 400 Amp 3pole, central 15 Each 13150.00 197250.00
pot rotating double break type isolator (IS:9921
part I toV) without earth blade operating
mechanism with GI spring loaded reverse loop
type fixed contact, solid hard drawn electolytic
copper tubular moving contact with silver/ nickel
plated at end points, 9 nos post insulator of 12 kV
(IS:2554 & IS 5350 part III), hot dipped galvanising
hard ware, nut, bolts etc complete in all respect as
per specification of Discom.( Type tested by
ERDA/CPRI.)
21 E212500 Supply and fixing of distribution type Lightening 45 Each 2385.00 107325.00
arrestor 9 kV, 5 kA (IS:3070) with mounting
breaking to be installed on existing DP structure.
(Type tested by ERDA/CPRI.)
22 E212600 Supply and fixing double pole structure for 11/0.4 15 Each 8205.00 123075.00
Kv substation as per Discom specification
complete in all respect as required including nuts
and bolts etc (excluding the cost of poles) made of
MS channel of 4 nos 100 x 50 x 6mm and 4 nos 75
x 40 x 6mm and MS flat 50 x 6mm as per Discom
specifications.
23 E212700 Supply and fixing of 11 kV Danger plates as per 20 Each 34.00 680.00
specification of Discom on the existing poles
complete in all respect as per Discom
specification.
24 E212800 Providing and fixing of single pole mounted
5 Each 2384.00 11920.00
structure set for isolator as per Discom
specification complete in all respect with nuts and
bolts as required MS flat 50 x 6mm, MS angle 65 x
65 x6mm, MS channel 100 x 50 x 6mm. (
Excluding cost of pole ).
25 E213000 Supplying and drawing of XLPE insulated LT
bunched Aluminium conductor cable confirming to
IS 14255/1995 and IS 398 (Pt-4)/ 1994 on existing
cross arms through I hook with all necessary T&P
required including binding and twisting etc.
complete in all respect as required as per Discom
specification.
(a) E213002 1 X 25 sq. mm. + 1X25 sq. mm. (Bared) 2000.00 P.Mtr 40.00 80000.00
(b) E213008 3 X 50 sq. mm. + 1X35 sq. mm. (Bared) 2500.00 P.Mtr 134.00 335000.00

26 E110100 P/Laying XLPE/ P.V.C. insulated & P.V.C.
sheathed cable of 1.1 KV grade with aluminium
conductor of IS:7098-I /1554 P-I of Group2 of
approved make in ground as per IS:1255 including
excavation of 30cmx75cm size trench, 25 cm thick
under layer of sand,IInd class bricks covering,
refilling earth,compaction of earth, making
necessary connection, testing etc. as required of
size.
(a) E110102A 2core 4.00 Sqmm 100.00 Mtr 84.00 8400.00
(b) E110105C 4core 16.00 Sqmm 100.00 Mtr 132.00 13200.00
(c) E110111D 3.5core 120.00 Sqmm 100.00 Mtr 551.85 55185.00
(d) E110113D 3.5core 185.00 Sqmm 200.00 Mtr 793.80 158760.00
27 NOTE ADD @10.0% EXTRA FOR GROUP - I CABLE IN 235545.00 10.00% 23554.50
ITEM NO. 26
28 E120100 Supplying and making one end termination with
heavy duty single compression brass gland SIBG
type, aluminium lugs duly crimped with crimping
tool, PVC tape etc for following size of Armoured
PVC insulated & PVC sheathed/ XLPE aluminium
conductor cable of 1100 volt grade as required of
size.
(a) E120130 3.5 X 120.0 Sqmm 5 Each 310.00 1550.00
(b) E120132 3.5 X 185.0 Sqmm 20 Each 395.00 7900.00
29 E130100 P & Laying XLPE insulated IS:7098/II/85 of Group1
and approved make H.T.cable for working voltage
11 K.V.Earthed direct in ground including
excavation of 30cmx100cm size trench, 25cm
layer of river sand, IInd class bricks covering,
refilling earth, compaction of earth, making
necessary connection testing etc.as required of
size.
(a) E130107 3 core 185.0 Sq.mm 1000.00 Mtr 1050.00 1050000.00
30 E130200 P & Laying XLPE insulated IS:7098/II/85 of Group1
and approved make H.T.cable for working voltage
33 K.V.Earthed direct in ground including
excavation of 30cmx100cm size trench, 25cm
layer of river sand, IInd class bricks covering,
refilling earth, compaction of earth, making
necessary connection testing etc.as required of
size.
(a) E130201 3 core 300.0 Sq.mm 500.00 Mtr 2100.00 1050000.00
31 E130300 Providing & making heat shrinkable type
indoor/outdoor/straight through terminations/joint
kit of Group1 and approved make suitable for
XLPE insulated 11 KV cable, with required
components, prepration of cable ends,testing etc.
as required of following sizes .
(a) E130303 3 core 120/150/185/225 Sq.mm(outdoor type) 40 Each 8400.00 336000.00
(b) E130303 3 core 120/150/185/225 Sq.mm (straight through 2 Each 17800.00 35600.00
type)
32 E130400 Providing & making heat shrinkable type indoor/
outdoor/ straight through terminations/ joint kit of
Group1 and approved make suitable for XLPE
insulated 33 KV cable, with required components,
prepration of cable ends,testing etc. as required of
following sizes .
(a) E130401 3 core 300 Sq.mm (outdoor type) 12 Each 9200.00 110400.00
(b) E130401 3 core 300 Sq.mm (straight through type) 1 Each 19000.00 19000.00

33 E150200 Plate Earthing as per IS:3043 with G.I. Earth plate
of size 600mm x 600mm x 6.0mm by embodying 3
to 4 mtr. below the ground level with 20 mm dia.
G.I. 'B' class watering Pipe including all
accessories like nut, bolts, reducer ,nipple, wire
meshed funnel, and C.C. finished chamber
covered with hinged type with locking arrangement
C.I. Cover, C.I. Frame of size300mm x 300mm
complete with alternate layers of salt and
coke/charcoal, testing of earth resistance as
required.
34 E150100 Pipe Earthing as per IS:3043 with perforated 3.0
Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe including
all accessories like nut, bolts, reducer, nipple, wire
meshed funnel, and C.C. finished chamber
covered with hinged type with locking arrangement
C.I. Cover, C.I. Frame of size 300mm x 300 mm
and embodying the pipe complete with alternate
layers salt and coke/ charcoal, testing of earth
resistance as required.
25 Each 1755.00 43875.00
50 Each 1125.00 56250.00
35 E150500 S & Laying following size earth wire/strip in
horizontal or vertical run in ground/surface/recess
including riveting, soldering, saddles, making
connection etc. as required.
(a) E150505 8 SWG G.I. Wire 200.00 Mtr 6.75 1350.00
(b) E150515 32mm x6mm G.I. Strip 200.00 Mtr 76.75 15350.00
36 E212900
5 Each 9700.00 48500.00
Supply and eraction of RS joist of 116 x 100 mm,
11Meter long with the welded/ bolted top hamper
65 x 65 x 6mm (0.7 Mtr long) making necessary
arrangement for fixing 11 kV 'V' cross arm, LT
bracket and guard wire bracket, grouted in ground
1/6 th of its length and fixed with cement, coarse
and grit in 1:3:6 ratio in 1/5th of its length (40cm
dia) from the bottom including two coats of
aluminium paint over the complete length of joist.
37 SITC of wall/ free standing floor mounted dust and
vermin proof compartmentalised cubical panel
made out of CRCA sheet , required hardware
,duly painted by either two coats of zinc/ red oxide
primer followed by two coats of synthetic enamel
paint or powder coating in grey or required shade
after rinsing . The panel having PU/ Neoprene
rubber gasket of not less than 3mm thickness ,
separate detachable gland plate M.S. base
channel ,hinged door with locking arrangement for
equipment/switchgear . Thickness of sheet shall
not be less than 1.6 mm up to 600 mm length /
width of any compartment and be of 2.0 mm
above 600 mm. Load bearing structure shall be of
2.0 mm thick sheet supported by base M.S.
channel if required . Side walls and cable alley
compartments having bolted type doors with
detachable extension type structure. (only outer
area on all sides shall be measured )
(a) Enamel Painted 20 Sqm 1622.00 32440.00
38
Supplying and fixing of Aluminium / Copper bus
bar by means of SMC / DMC type insulator, high
tensile nuts and bolts spring washers in existing
panel including bending , cutting in required shape
and size and colour coding with heat shrinkable
E080200 PVC sleeves.

(a) E080201 Electrolytic grade aluminium bus bar 20 Kg 288.00 5760.00
39 P&F TP&N 415 V AC-23A front handle operated
switch disconnector fuse unit, cubical type, without
metallic enclosure, conforming to IS:13947 P-III in
existing panel (W/O HBC fuses) including making
connections with lugs, testing etc as required.
(a) E100404 200 A rating 5 Each 5396.00 26980.00
G.Total Rs. 5377439.5
I / we here by agree to execute the work on ----------- % above / Below on
Electrical BSR 2008
Signature of Contractor
Project Director (Electrical),
RSRDC Ltd. Unit Elect. II-Jaipur
Schedule - H
Name Of Work :- LT/HT Line shifting work at Dabok - Mavli - Fatehnagar - Chittorgarh Road (SH-9) under Distt.
Udaipur.(PART - I)

S. BSR
DESCRIPTION QTY UNIT RATE AMOUNT
NO. CODE
PART –B: (NON B.S.R ITEMS )
1 N-BSR Providing Laying and Jointing R.C.C. class NP-
2 Non-pressure pipe (IS : 458 mark) of approved
make with collars, jointed with C.M. 1:2, or
having Spigot and socket ends with flexible rubber
rings joint including testing of joints etc.
complete.
(a) N-BSR a) 150mm dia Internal 200.00 Mtr.
(b) N-BSR b) 250mm dia Internal 200.00 Mtr.
2 N-BSR Cutting for Paver finished surface up to 1.5M
depth including all layers of crust for laying
pipe line etc. and making good to original
condition (excluding cost of bitumen).
100.00 Sqm
3 N-BSR P&F G.I.Pipes (External Work) with G.I. Fittings
(IS : 1239 Mark) including trenching & refilling
earth etc. "A" Class
(a) N-BSR a) 100mm dia nominal bore. 240.00 Mtr.
(b) N-BSR b) 150mm dia nominal bore. 120.00 Mtr.
4 N-BSR Supply & Erection of lattice structure of height 70 Nos.
12.8 mtr i.e 42 feet in alignment, including
excavation of pit and Providing and laying of
cement concrete in ratio 1:3:6 using 43 grade
cement, river sand and 12 mm to 20 graded blast
crusher broken in pit/ found cement plaster upto
0.50mtr. from top to bottom in 1:3:6 ratio and paint
of tower of approved make two coat of red oxide
paint and one coat of aluminium paint before
installation and one coat of paint after irrection
work completed as per technical specifications of
DISCOM. All complete works.
5 N-BSR Supply & Erection of lattice structure of height 11
mtr i.e 36 feet in alignment, including excavation
of pit and Providing and laying of cement concrete
in ratio 1:3:6 using 43 grade cement, river sand
and 12 mm to 20 graded blast crusher broken in
pit/ found cement plaster upto 0.50mtr. from top to
bottom in 1:3:6 ratio and paint of tower of approved
make two coat of red oxide paint and one coat of
aluminium paint before installation and one coat of
paint after irrection work completed as per
technical specifications of DISCOM. All complete
works.
6 N-BSR Supply of Fabricated 33 KV of 'V' type cross arms
made of MS channel 100x50 ISMC (9.5Kg. Per
Mtr.) on the existing poles complete including all
necessary nut and bolt etc with clamps as per
technical specifications of DISCOM. All complete
works.
7 N-BSR Supply & Errection of special stud structure for
33KV lattice structure made of M.S. angle,
channer, flats complete in all respects with
bracings including excavation of pit and providing
and laying of cement concredte in 1:3:6 as per
technical specifications of DISCOM. All complete
works.
50 Nos.
40 Nos.
3 Nos.

8 N-BSR Supply and fixing 33kV pin insulator( IS 731/ 1971)
with minimum creepage distance of 300mm on
existing bracket including all accessories like hot
dipped GI spindle and nuts etc as per technical
specifications of DISCOM. All complete works.
15 Nos.
9 N-BSR Supply and fixing of top hamper on the existing 40 Nos.
pole complete including nut bolts etc as required.
Vertical type 33 kV. 0.75mtr. IS 75x75x6mm (Steel
weight 6.5Kg. Approx. per top hamper). As per
tech. specs. Of DISCOM
10 N-BSR Supply and fixing of guard bracket 2.2 mtr. long 200 Nos.
made from (75x40) ISMC 7.14Kg. Per Mtr. M.S.
channel including necessary clamp and botls etc.
as per technical specification of DISCOM. All
complete work.
11 N-BSR Supply and fixing M.S. channel (cut point) 50 Nos.
100x50mm ISMC (9.5Kg. Per Mtr.) 2x1.8mtr. long
with pilot patti 50x6mm thick necessary nuts and
bolts etc. as per technical specification of
DISCOM. All complete work.
12
S I T C of Copper wound Transformer conforming
to IS: 2026 of rating 11/0.433KV Delta-Star
Connected, Vector Group Dyn 11, standard
accessories like conservator, silica gel breather,
radiator, fins, HT BUSHING & LT cableboxes, OFF-
LTC (+/- 5% in steps of 2.5%) winding temperature
rise of 50/55 C, ISI marked drain valve, first fill of
oil, Epoxy based paint, including carrying of precommission
Testing & Charging of Transformer. As
per Discom,s Specifications.star rated
a N-BSR 25 KVA 5 Nos.
b N-BSR 40 KVA 4 Nos.
c N-BSR 63 KVA 1 Nos.
d N-BSR 100 KVA 1 Nos.
13 S I T C of single phase Copper wound
Transformer conforming to IS: 2026 of rating
11/0.233KV, first fill of oil, Epoxy based paint,
including carrying of pre-commission Testing &
Charging of Transformer.As per Discom's Tech.
Specifications
a N-BSR 25 KVA 2 Nos.
b N-BSR 16 KVA 2 Nos.
14 N-BSR Supply and installation of spike of M.S. rod 20mm 200 Nos.
dia 3.0mtr. long for earthing of (tower/pole) drive
into earth by mechnical means sturcture
connection the spike with cross arm top hamper
PCC pole, lattics tower to earth etc. complete as
per technical specification of DISCOM. All
complete work.
15 N-BSR Dismentling the structure with pole mounted 20 Nos.
transformer different capacity along with
distribution boards and re- erecting the transformer
in the structure to be newly erected along with
distribution boards and erecting testing, testing and
commissioning (as well as cabling

16 N-BSR Dismantling of following existing electric poles
(PCC poles, MS channel, Lattic tower 12.6mtr.
along with the ACSR Conductors, 11KV/33KV/LT
line etc. 11KV insulator LT insulator guard wires,
staywires and other electric items of the pole
coming along the alignment of the road and
removal and re- rolling PCC pole, MS channel
different sizes as well as handing over the same to
AVVNL store including transportation from site to
store and stacking of dismantling material in store
and as per the direction of Engineer Incharge and
clean the site good as per the requirement and
submit the receipt from concering authority, all
complete works.
17 N-BSR Dismantling of following existing street light electric
poles with street light fixtures, underground cable,
MS box and other electric items of the pole coming
along the alignment of the road and removal and
re- rolling MS poles/PCC poles of different sizes as
well as handing over the same to AVVNL/UIT/MC
concering store including transportation from site
to store and as per the direction of Engineer
Incharge and clean the site good as per the
requirement and submit the receipt from concering
authority, all complete works.
18 N-BSR Dismantling of service line connection of
industrial/domestic connection, single phase
supply/three phase supply system on existing
cross arm PCC pole, MS channel different sizes of
poles along with the ACSR conductor/service line
weather proof cable/ Armoured cable, guard wire,
stay wire and other electrical item of the pole
comming along the alignment of the road and
removal and re-rolling as well as handing over the
same to AVVNL store including transportation from
site to store and stacking of dismantling material in
store and temporary supply electrical connection to
domestic/industrial connection to consumer where
supply disconnected and as per the direction of
Engineer Incharge and clean the site good as per
the requirement , all complete works.
200 Nos.
20 Nos.
20 Nos.
TOTAL
I / we hereby agree to execute the work on rates quoted above
Signature of Contractor With Seal
Project Director (Electrical),
RSRDC Ltd. Unit Elect. II-Jaipur