You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
q<br />
w<br />
r<br />
e<br />
INSTALINK <br />
Interface Modules<br />
t<br />
1. Custom jumpers can be easily produced<br />
2. 14AWG, 600V rated jumpers<br />
3. Jumpers included with modules<br />
4. Side-by-side terminals for easy installation<br />
5. Analog interface modules feature a make-before-break connector<br />
for easy insertion of a meter or calibrator into 4-20mA loops<br />
6. Mounting on 32mm and 35mm DIN rail<br />
y<br />
2 P R O D U C T O V E R V I E W
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
INSTALINK <br />
Product Overview<br />
INSTALINK<br />
GLF Ground Loop Filter<br />
Eliminates ground loops caused<br />
by differential ground voltages<br />
up to 120V, 2 wire 4-20mA input,<br />
3 wire output, fast response time<br />
and make-before-break test jack.<br />
Cat. #:330002<br />
INSTALINK<br />
CLI 4-20mA Loop Isolator<br />
Eliminates ground loops caused<br />
by differential ground voltages with<br />
input/output isolation up to 2000V.<br />
Make-before-break test jack for<br />
temporary connection of a meter,<br />
adjustable response time from 1ms<br />
to 400ms.<br />
Cat. #:330004<br />
INSTALINK<br />
FRM Fused Relay Module<br />
1 form C (SPDT) relay contact with<br />
5 x 20mm fuse in series with the<br />
common contact.<br />
Cat. #:330011<br />
INSTALINK<br />
CLM Current Limiter<br />
Limits current in a short circuited<br />
4-20mA loop to 24mA. Prevents<br />
fault in one loop from shutting down<br />
the power supply. Includes a makebefore-break<br />
test jack for temporary<br />
connection of a meter and an alarm<br />
output.<br />
Cat. #:330009<br />
INSTALINK<br />
PLI Passive Loop Interface<br />
Replaces individual terminal blocks<br />
in a 2 wire current loop application.<br />
Includes test points for a HART ®<br />
device and a make-before-break<br />
test jack.<br />
Cat. #:330008<br />
INSTALINK<br />
DC SSR Solid State Relay<br />
and Current Limiter<br />
DC solid state relay rated up to<br />
20A, includes overcurrent protection<br />
with user adjustable threshold.<br />
Cat. #:330013<br />
INSTALINK<br />
CMM Continuity Monitoring<br />
Module<br />
Monitors continuity in 24VDC digital<br />
input and output control loops.<br />
Provides a digital output if the<br />
continuity is interrupted.<br />
Cat. #:330044<br />
INSTALINK<br />
Custom<br />
Designed for power distribution,<br />
this custom InstaLink module<br />
includes a 5 x 20mm fuse under<br />
a touch-safe cover and a lever<br />
disconnect with test points. Input<br />
power is via terminals or the<br />
push-on cross connections.<br />
Visit www.emphatec.com for complete specifications<br />
P R O D U C T O V E R V I E W 3
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
SIGNEXT <br />
Product Overview<br />
SIGNEXT<br />
On-Off Auto Switch Module<br />
On-Off Auto switch module for use with any relay<br />
or contactor with a coil rated up to 120V, 5A.<br />
Features 24Vdc status outputs so PLC or DCS<br />
can monitor the position of the switch.<br />
Cat. # 330221<br />
SIGNEXT<br />
On-Off Auto Relay Module<br />
Relay module with socket mounted 6A,<br />
1 form C relay and on-board On-Off-Auto switch.<br />
Cat #: 330222<br />
w<br />
q<br />
SIGNEXT<br />
ERM Relay Modules<br />
These modules were designed with price in mind.<br />
The relays are soldered to the PCB, not socket<br />
mounted and the terminations accept 14AWG<br />
maximum wires instead of 12AWG.They are<br />
available with a 24Vdc coil.<br />
1. Cat #:330236 - 1 form A, 3A<br />
2. Cat. #330235 - 1 form C, 10A<br />
SIGNEXT<br />
RS70 Class 2 Current Limiter<br />
This module allows any power supply to be used<br />
in Class 2 Limited Energy applications. Multiple<br />
modules can be used with a single power supply.<br />
The redundant current sensing and switching<br />
circuit features provide high reliablity and safety.<br />
Cat. #330246<br />
SIGNEXT<br />
CT Shorting Module<br />
This module automatically applies a short<br />
circuit to a current transformer in the event the<br />
secondary voltage increases over approximately<br />
2V. This prevents hazardous voltages from<br />
being produced by a current transformer that is<br />
accidentally unloaded.<br />
Cat. #330123<br />
4 P R O D U C T O V E R V I E W<br />
Visit www.emphatec.com for complete specifications
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
e<br />
q<br />
y<br />
wt<br />
r<br />
SIGNEXT S4X<br />
Analog Signal Conditioners<br />
1. Easily accessible span and zero adjustments<br />
2. Economically priced<br />
3. 22.5mm wide<br />
4. Many modules offer DIP switch configurable<br />
input and output ranges<br />
5. 24 different models available<br />
6. Plug and socket connections<br />
P R O D U C T O V E R V I E W 5
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
SIGNEXT <br />
Product Overview<br />
SIGNEXT<br />
DT Configurable<br />
Signal Conditioner<br />
This Signal Conditioner can be<br />
configured by the user for a total<br />
of 42 different input/output signal<br />
combinations. This one module<br />
should meet most of your analog<br />
signal isolation and conversion<br />
needs.<br />
Cat. #330053<br />
SIGNEXT<br />
DTD Dual Output Loop Powered<br />
Signal Conditioner<br />
The SIGNEXT - DTD module<br />
provides 2 isolated analog inputs<br />
so a single field transmitter can be<br />
easily interfaced to 2 devices such<br />
as a PLC and a local display .<br />
Cat. #330054 - 4-20mA input<br />
Cat. #330139 - 0-10Vdc input<br />
SIGNEXT<br />
2DT Loop Powered<br />
Signal Conditioner<br />
The 2DT can perform 4 functions:<br />
• provides power to a 2 wire<br />
transmitter<br />
• isolates the analog signal<br />
• converts a 4-20mA signal to<br />
a voltage or a different current<br />
range<br />
• provides 2 isolated analog outputs<br />
Cat. #330137<br />
SIGNEXT<br />
PT Potentiometer<br />
Signal Conditioner<br />
The SIGNEXT - PT converts the<br />
output of a potentiometer to a<br />
standard analog signal.<br />
Cat. #330136<br />
SIGNEXT<br />
DW Signal Conditioner<br />
& Isolated Power Supply<br />
This module performs three<br />
functions, it provides power to a<br />
2 wire transmitter, it isolates the<br />
analog signal and it converts a<br />
4-20mA signal to voltage or a<br />
different current range.<br />
Cat. #330140<br />
SIGNEXT<br />
DWD Dual Output<br />
Signal Conditioner & Isolated<br />
Power Supply<br />
The DWD can perform 4 functions:<br />
• provides power to a 2 wire<br />
transmitter<br />
• isolates the analog signal<br />
+<br />
• converts a 4-20mA signal to<br />
a voltage or a different current<br />
range<br />
• provides 2 isolated analog outputs<br />
Cat. #330141<br />
SIGNEXT<br />
Loop Calibrator<br />
Emphatec’s SIGNEXT Loop<br />
Calibrator is low cost and easy<br />
to use. It is intended for use with<br />
powered loops so no batteries or AC<br />
power adaptors are required. Works<br />
with an external meter.<br />
Cat. #330208<br />
6 P R O D U C T O V E R V I E W<br />
Visit www.emphatec.com for complete specifications
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
SIGNEXT<br />
T/C Thermocouple Signal Conditioner<br />
The SIGNEXT - T/C module converts a thermocouple<br />
signal to a standard analog value such as 0-10V<br />
or 4-20mA. One module can accept 8 different<br />
thermocouple types, 16 temperature ranges and offers<br />
6 different analog output ranges.<br />
Cat. #330142<br />
SIGNEXT<br />
RR RTD Signal Conditioner<br />
The SIGNEXT - RR module converts a 3 wire PT100<br />
RTD signal to a standard analog value such as 0-10V<br />
or 4-20mA. Modules are available for 8 different<br />
temperature ranges.<br />
Cat. #330055A - Temperature Range, -100 to +100°C<br />
Cat. #330055B - Temperature Range, -50 to +50°C<br />
Cat. #330055C - Temperature Range, -50 to +100°C<br />
Cat. #330055D - Temperature Range, -50 to +200°C<br />
Cat. #330055E - Temperature Range, 0 to +50°C<br />
Cat. #330055F - Temperature Range, 0 to +100°C<br />
Cat. #330055G - Temperature Range, 0 to +200°C<br />
Cat. #330055H - Temperature Range, 0 to +400°C<br />
SIGNEXT<br />
2RR RTD Transmitter<br />
This SIGNEXT - 2RR RTD Transmitter converts a 3 wire<br />
PT100 RTD signal to a 4-20mA signal. Modules are<br />
available for 8 different temperature ranges.<br />
Cat. #330135A - Temperature Range, -100 to +100°C<br />
Cat. #330135B - Temperature Range, -50 to +50°C<br />
Cat. #330135C - Temperature Range, -50 to +100°C<br />
Cat. #330135D - Temperature Range, -50 to +200°C<br />
Cat. #330135E - Temperature Range, 0 to +50°C<br />
Cat. #330135F - Temperature Range, 0 to +100°C<br />
Cat. #330135G - Temperature Range, 0 to +200°C<br />
Cat. #330135H - Temperature Range, 0 to +400°C<br />
Visit www.emphatec.com for complete specifications<br />
P R O D U C T O V E R V I E W 7
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
DC PLUS <br />
Emphatec offers great deals for your DC<br />
power needs. Buy a DC PLUS power<br />
supply together with our terminal blocks<br />
and you save money. And we make it<br />
easy – order one catalog number and you<br />
get a kit including the power supply, fuse<br />
terminals for the 24V power, feedthrough<br />
terminals for the 0V, jumpers, and marking<br />
tags. Best of all, you can save over<br />
$100.00.<br />
The DC PLUS power supplies and<br />
the terminal blocks are Class 1 Division<br />
2 certified. The fuse terminals accept<br />
standard 5x20mm fuses rated up to<br />
10A and have a red coloured lever. The<br />
feedthrough terminals are black and<br />
accept 20-12AWG wire.<br />
8 P R O D U C T O V E R V I E W<br />
Catalogue Power Fuse Feedthrough<br />
Number Supply Terminal Terminal Savings<br />
330262 24Vdc @ 7.5A 8 8 12.6% off standard price.*<br />
330263 24Vdc @ 15A 16 16 16.6%<br />
330264 24Vdc @ 25A 16 16 13.8%<br />
*Price compared to buying components individually.<br />
Visit www.emphatec.com for complete specifications
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
DC PLUS <br />
Premium Power Supplies<br />
The DC PLUS<br />
30W Power Supply<br />
Designed specifically to reduce the amount of panel<br />
space required to install an AC/DC power supply.<br />
At just 22.5mm wide it is ideal for retrofits and for<br />
applications where a small control cabinet is used.<br />
Cat. #330001 - Class 2 Limited Energy Certified<br />
The DC PLUS<br />
180W Power Supply<br />
Requires minimal panel space and is ideal for retrofits<br />
as well as new designs. The input is 85 - 264 Vac and<br />
the output is 24Vdc @ 7.5A. This power supply features<br />
universal input, adjustable output voltage,plug and<br />
socket connectors and a fault relay.<br />
Cat. #330200 - Class 1 Division 2 / Zone 2 Certified<br />
The VANGUARD<br />
AC Outlet<br />
Makes adding a 120V maintenance<br />
outlet to control cabinets quick and<br />
easy. It mounts on standard 35mm<br />
DIN rail and requires just 42mm of<br />
rail space.<br />
An LED indicates that 120V<br />
is applied to the module. The<br />
terminations accept slotted or<br />
Phillips screwdrivers. The mounting<br />
foot includes a latching lock - slide<br />
it open, mount the module on the<br />
DIN rail and slide the lock closed.<br />
The VANGUARD AC Outlet is CSA<br />
certified and UL recognized.<br />
Cat. #330036<br />
The DC PLUS<br />
360W Power Supply<br />
Offers high power in a very compact size. You only<br />
need 80mm of DIN rail to install a 24Vdc @ 15A power<br />
supply. The input is 115/230Vac (autoranging) making it<br />
suitable for global applications.<br />
Cat. #330201 - Class 1 Division 2 / Zone 2 Certified<br />
The DC PLUS<br />
600W Power Supply<br />
Offers high power in a very compact size. The 24Vdc<br />
@ 25A output is delivered by a package requiring<br />
just 165mm of DIN rail, The input is 115 /230Vac<br />
(autoranging) making it suitable for global applications.<br />
Cat. #330202 - Class 1 Division 2 / Zone 2 Certified<br />
Visit www.emphatec.com for complete specifications<br />
P R O D U C T O V E R V I E W 9
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
DEPRO <br />
Class 1 Division 2 Certified Products<br />
DEPRO<br />
Fuse Monitor<br />
These modules monitor up to 8 fuses or circuit<br />
breakers and provide a 1 form C (SPDT) relay<br />
contact to indicate a failure. Two versions are<br />
available - one for 24Vdc applications and one<br />
for 120Vac applications.<br />
Cat. #330015 - 24Vdc Cat. #330042 - 120Vac<br />
BC Series Terminals<br />
For Power and Signal Distribution<br />
in Hazardous Areas<br />
These terminals are CSA approved for Class<br />
1 Division 2 applications although they are<br />
also excellent terminals for general purpose<br />
applications. The BC5F fuse terminal is the only<br />
C1D2 certified 5x20mm fuse holder we are<br />
aware of!<br />
Cat. #330016 -<br />
BC2.5/4 Feedthrough Terminal (Grey)<br />
Cat. #330087 -<br />
BC2.5/4 Feedthrough Terminal (Red)<br />
Cat. #330086 -<br />
BC2.5/4 Feedthrough Terminal (Black)<br />
Cat. #330018 - BC4S Disconnect Terminal (Grey)<br />
Cat. #330090 - BC4S Disconnect Terminal (Red)<br />
Cat. #330017 - BC5F 5x20mm Fuse Holder (Grey)<br />
Cat. #330085 - BC5F 5x20mm Fuse Holder (Red)<br />
DEPRO<br />
8 Channel Optocoupler<br />
In applications where panel space is limited this<br />
module is the ideal solution. In 22.5mm of DIN<br />
rail space the DEPRO 8 Channel Optocoupler<br />
provides 8 isolated optocouplers with wide range<br />
and constant current inputs - that’s just 2.8mm<br />
per opto.<br />
Cat. #330033<br />
1 0 P R O D U C T O V E R V I E W<br />
Visit www.emphatec.com for complete specifications
E M P H AT E C E M P H A S I S O N S O L U T I O N S<br />
Custom Products<br />
Product specific for your needs<br />
Does your application need a<br />
specialized interface device that isn’t<br />
available off-the-shelf Want increased<br />
flexibility Need to save panel space<br />
Let us design a product specific to your<br />
needs. Emphatec’s Design Engineers<br />
have generated hundreds of new<br />
product designs ranging from a few<br />
components in a terminal block to<br />
dedicated purpose controllers, analog<br />
signal conditioners and power supplies.<br />
Printed circuit board layout is done<br />
in-house and we have our own<br />
environmental and EMC test facilities.<br />
When your custom product goes into<br />
production we have manufacturing<br />
partners in Canada for low to medium<br />
volumes and China for high volumes.<br />
Design, prototyping, testing, component<br />
procurement, agency approvals, quality<br />
control, manufacturing – Emphatec<br />
does it all! And to make us even<br />
easier to do business with there’s no<br />
minimum order quantity (each project<br />
is priced-per-order).<br />
Visit www.emphatec.com for complete specifications<br />
P R O D U C T O V E R V I E W 1 1
In October 2003, Emphatec was established<br />
and incorporated as a Company under<br />
private ownership. Prior to this date, we were<br />
the Engineering and Production Division of<br />
Weidmuller Canada. Our mandate within<br />
Weidmuller Canada was to design and produce<br />
application specific products to customer<br />
specifications, as well as, fill gaps within the<br />
standard product offering. Our focus and<br />
dedication to providing our customers with<br />
solutions has not changed and continues to be<br />
our priority.<br />
Since 1988 (as a division of Weidmuller), we<br />
have produced everything from simple interface<br />
products to analog signal conditioners and<br />
custom microprocessor-based controllers.<br />
Switchmode power supply design is another<br />
significant core competency and we have used<br />
this to produce highly differentiated products<br />
specifically for industrial and process automation<br />
applications.<br />
Our Team has been serving the industrial<br />
interface and power supply business for over<br />
20 years and now as Emphatec our standard<br />
products offering continues to expand. We offer<br />
VANGUARD modules that are the front-end<br />
in a control system - AC power distribution and<br />
protection products. SIGNEXT modules include<br />
analog signal conditioners, high-density discrete<br />
interfaces and many unique power distribution<br />
products. The INSTALINK interface modules<br />
are designed for easy installation, includes the<br />
innovative control loop “Continuity Monitoring<br />
Module” and a DC solid-state relay / over-current<br />
protector. We offer DC PLUS power supplies<br />
with features not found elsewhere. In addition,<br />
our DEPRO products are Class 1 Division 2,<br />
certified for hazardous location applications.<br />
Our engineers are experienced with CSA, UL<br />
and CE mark requirements for control system<br />
components and power supplies. We are ISO<br />
Certified and conform to the ISO 9001:2000<br />
standard. We have our own EMC test lab, an<br />
environmental test chamber and a power supply<br />
burn-in facility. In addition, Emphatec has both<br />
Canadian and Asian manufacturing partners to<br />
ensure that our pricing is competitive for both<br />
low volume and high volume production.<br />
Emphatec <strong>Ltd</strong>.<br />
10A Spy Court<br />
Markham, Ontario, L3R 5H6, Canada<br />
Toll free: 1-866-698-1134<br />
Tel: 905-475-0220 Fax: 905-475-8796<br />
www.emphatec.com<br />
©Copyright 2010 Emphatec <strong>Ltd</strong>. All rights reserved.<br />
04282010