Sign Application Checklist - City Of Belmont

More documents

Recommendations

Info

Furthermore, the advertiser shall supply to the Council prior to erecting such a sign a certificate from a structural engineer certifying that the connection of the balloon type object to the building or lot is of a structurally sound design. 3.13 Product Display Signs 3.13.1 Product Display Signs shall: Figure 12: Balloon type or inflatable tethered sign. (a) be located wholly within the boundaries of a lot; (b) be placed so as not to cause any interference, whether directly or indirectly, to vehicular traffic or pedestrians; (c) have no moving parts; (d) be limited to a maximum of one sign per street frontage on any one lot; (e) have a maximum vertical or horizontal dimension of 2.0m. 3.14 Flags 3.14.1 Council can consider a maximum of two flag poles per lot, only where the applicant provides a complete sign strategy and the flags are not considered superfluous or unnecessary. 3.14.2 The maximum height of the flag pole shall not exceed 6.0 metres. 3.14.3 Each flag shall not exceed 4.0sqm and shall be affixed to a pole of sufficient size and strength to support the flag under all conditions. 3.14.4 No flag shall be permitted within 5 metres of any sign located on the same lot. 3.14.5 Applications for more than 2 flags or flags greater than 6metres in height may be considered for landmark sites and will be assessed on their merit. Figure 13: Flag
3.15 Bunting 3.15.1 No bunting shall be permitted in the City of Belmont. Figure 14: Bunting 3.16 Reserves 3.16.1 Signage within reserves that is visible to the street shall be minimised. Council may, at its discretion, consider signage within a reserve where: (a) The sign is necessary to advertise activities regularly held at the reserve; (b) The sign is necessary for directing users to community group or sporting club rooms; (c) The sign excludes any commercial advertising or sponsorship details. 3.16.2 In accordance with Schedule 5 of the City of Belmont Local Planning Scheme No. 15, advertising signs relating to the functions of government, a public authority or Council or are exhibited on behalf any of these bodies is exempt from planning approval, unless they are of a promotional nature. 3.16.3 Any sign erected on a Local Scheme Reserve to promote a significant project and/or public work undertaken by the City of Belmont shall not exceed an area of 15 m 2 . 3.16.4 Sponsorship signage will be required to face internally into the reserve, so that the face of the sponsorship sign is not visible from the street. 3.16.5 Council may allow sponsorship signage or signage associated with a special event to be displayed on a reserve where: (a) The signage is only displayed for a limited duration leading up to the special event and is removed following the final day of the event; (b) If relating to sporting club activities, the sign is only displayed for the duration of the sporting event with members of the sporting club in attendance at the reserve; (c) The sign to be in a form that can be easily removed (eg tethered sign) on a day to day basis. 3.17 Property Transaction Signs 3.17.1 In accordance with Schedule 5 of the City of Belmont Local Planning Scheme No. 15, property transactions signs are exempt from planning approval where; (a) The sign is displayed for the duration of the period over which the property transactions are offered and negotiated and the sign complies with Clauses 3.17.2 and of this Policy.
Page 1 and 2: Sign Applications Date of Publicati
Page 3 and 4: 2.5 Advertisement Sign Diagram Diag
Page 5 and 6: Figure 3: Projecting Sign 3.5.4 In
Page 7 and 8: 3.7.5 Notwithstanding paragraphs 3.
Page 9: Figure 10: Hoarding 3.11 Panel Sign
Page 13 and 14: 3.18 Election Signs 3.18.1 For Fede
Page 15 and 16: Sign Application Checklist Internal
Page 17 and 18: ADDITIONAL INFORMATION SHEET FOR AD
Page 19: Attachment 2 Example Only -Plan Sho

Sign Application Checklist - City Of Belmont

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?