Mini Remote Control Panel - Kamtek

All values are displayed either on the LCD or LED displays and all the switch and knob legends
all have LED back lighting for easy reading in dark environments.
Output is on an industry standard XLR3 or XLR4
socket in RS485 format. The XLR4 version also
carries power for the protocol converter. The remote
Protocol Converters can be up to 1km from the Mini
RCP using standard audio cable. An LED indicates
power and data at the remote end.
The Protocol Converters are supplied with the
appropriate camera connector.
Protocol Converter & camera plug
Data can also be routed via any Bradley Engineering joystick controller and is interlaced into
the pan, tilt and lens command data. This enables engineering commands to be sent via the
same data path but to a different camera to that being controlled by the camera operator.
Direct access knobs;
Iris
Master Pedestal
Gain
Shutter
Detail
Red Gain
Blue Gain
White Balance & Bars
Camera Select
Update
Display Iris/Master Pedestal
One-Touch Sub Functions; (The operation of these functions is dependent on the camera)
Gamma
Black Gamma
Shading
Chroma Gain
Shutter Mode
Menu Page
Menu Up/Dn & Select
Synchronisation
16:9 / 4:3
Functions may change, be removed or be added depending on the specification and camera.
Power: 12v, 200mA
Output: RS485
Dimensions: L.210mm, W.102mm, D.35mm
David Bradley Engineering Ltd - 2007