Tools - Inotec Electronics
Tools - Inotec Electronics
Tools - Inotec Electronics
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Tools</strong><br />
IHP500 Hand operated toggle lever table press<br />
42<br />
Part No. IHP500<br />
Technical data<br />
Pressure force KN 5,0<br />
Working stroke mm 40<br />
Adj. working height mm 45-220<br />
Spindle dia. mm 20<br />
Spindle bore mm 10H7x25<br />
Clearence mm 63<br />
Working surface mm 110x60<br />
T-slot DIN 650 mm 10<br />
Base dim. mm 110x160<br />
Weight kg 8,5<br />
Toggle lever table press of rigid construction for multiple use<br />
and sufficient pressure for crimp flanges. Toggle presses are<br />
employed where the full force of a press is only needed at the<br />
end of a working stroke.<br />
Crimp dies for table press<br />
Part No. DCBxxx(T)<br />
*xxx denotes the type and hexagonal dimension in mm. The dies<br />
are available within the range of the <strong>Inotec</strong> crimp ferrules in 0,5mm<br />
steps.<br />
PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.
<strong>Tools</strong><br />
HZ100 Special hand hold crimp tool<br />
Crimp dies for<br />
hand crimp tool.<br />
Part No. CB-xxx*(T)<br />
HZ201 Special hand hold crimp tool<br />
Crimp dies for hand crimp tool.<br />
Part No. CB201-xxx*(T)<br />
Part No. HZ100<br />
Precision one hand operated crimp tool with linear stroke.<br />
All parts made of high tensile steel and particular parts are<br />
specially hardened for long life. The upper die swings out<br />
and accepts crimp diameters which would normaly require a<br />
much larger capacity crimp tool, having a larger opening, and<br />
requiring the use of both hands to complete an operation.<br />
*xxx denotes the type and hexagonal dimension in mm.<br />
The dies are available within the range of the <strong>Inotec</strong> crimp<br />
ferrules in 0,5mm steps.<br />
Part No. HZ201<br />
Precision one hand operated tool similar to HZ100 but for<br />
hexagonal dimensions up to 20mm.<br />
*xxx denotes the type and hexagonal dimension in mm.<br />
The dies are available within the range of the <strong>Inotec</strong> crimp<br />
ferrules in 0,5mm steps.<br />
PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.<br />
43
<strong>Tools</strong><br />
Special tool HZ148 Precision crimp tool for single contacts with BO crimp<br />
Part No. HZ148<br />
for Crimp range 0,14-0,5mm 2<br />
Special tool HZ248 Precision crimp tool for single contacts with BO crimp<br />
44<br />
Hardened special steel for long life<br />
Parallel together moving crimp dies for secure crimp<br />
connections<br />
Handy tool with low operating crimp force<br />
High cable retention force due to subdivided<br />
crimp ranges<br />
B-crimping<br />
Grinding pattern of crimping<br />
by a crimping tool HZ148.<br />
Part No. HZ248<br />
for Crimp range 0,5-1,5mm 2<br />
Hardened special steel for long life<br />
Parallel together moving crimp dies for secure crimp<br />
connections<br />
Handy tool with low operating crimp force<br />
High cable retention force due to subdivided<br />
crimp ranges<br />
PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.
<strong>Tools</strong><br />
Crimping tool for turned contacts<br />
Part No.<br />
Insertion and removal tool for standard D-Sub crimp contacts<br />
Mounting device for coding elements<br />
Hand tool for coding pins<br />
Example<br />
Crimping tool: M22520/2-01<br />
Positioner: M22520/2-08<br />
8-notch crimping tool in MIL-design with adjustable depth<br />
of indentation.<br />
Part No. DCT100<br />
Part No.<br />
KOM09<br />
KOM15<br />
KOM25<br />
KOM37<br />
See page 20 foll. for technical information.<br />
Part No. KOD101<br />
For KOS-01. See page 20 foll. for technical information.<br />
Part No. KOD148<br />
For KOS-91. See page 26 foll. for technical information.<br />
PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 45
<strong>Tools</strong><br />
Insertion tool CFE Crimp flange insertion tool<br />
This very handy tool for inserting crimp flanges has been<br />
designed by <strong>Inotec</strong> to ease the handling, save time and<br />
simplify the assembling method.<br />
The application is a follow:<br />
Feed the conductors through the crimp flange and insert the<br />
crimp flange into the grooves of the insertion tool CFE. Push<br />
the crimp flange underneath the cable screen and sheath<br />
until it reaches its end position and take crimp flange out of<br />
the insertion tool.<br />
Other tools upon request.<br />
Scissors for cutting cable screen<br />
Screwdriver with hexagon ball end<br />
46<br />
Part No. CFE100 (to be used for crimp flange CF100<br />
and CF300)<br />
Part No. CFE200 (to be used for crimp flange CF200)<br />
Part No. CFE400 (to be used for crimp flange CF400)<br />
Part No. CS01<br />
This convenient scissors with its bent cutting edges made<br />
out of hardened steel is ideal for cutting cable screen.<br />
Part No. SDK01<br />
(Width across flats 2,5)<br />
This screwdriver is very well suited for slanted positioning<br />
(up to 30°) onto the socket screw of the hoods.<br />
PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS.
<strong>Tools</strong><br />
Tool box for several tools Dimensions in mm<br />
Could be equipped with<br />
1 Hand tool HZ100<br />
2 Crimp dies CB-xxx(T)<br />
3 Crimp dies CB-xxx(T)<br />
4 Accessories for HZ100<br />
5 Scissors CS01<br />
6 Insertion tool CFExxx<br />
7 Box for accessories<br />
8 Box for accessories<br />
9 Cable cutter<br />
Example<br />
Part No. WK100<br />
Inner dimensions: 326x222x78<br />
Outer dimensions: 335x275x88<br />
Assembly consists of:<br />
Tool box with plastic foam inside for individual equipment.<br />
PROFESSIONAL QUALITY FOR PROFESSIONAL APPLICATIONS. 47
Change language