CLEANING SYSTEMS
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Quick plate Cleaner (QPC)<br />
// What is it for<br />
• Cleaning of specific dust spots on the printing plates on request of the operator during production<br />
Increases quality output and reduce stand still time of the machine due to dust<br />
• Continuous (automatic) cleaning of the printing plates during production<br />
Especially for fingerprints, reducing the stand still times of the machine due to dry<br />
ink on the printing plates<br />
• Quick plate cleaning of the printing plates at feeder stop<br />
Quick start of the machine after jam up or feeder stop. Waiting time for cleaning is reduced<br />
to a minimum; about 8-10 waste boards<br />
// How does it work<br />
The system consists of a moveable<br />
cleaning head with a rotating special<br />
sponge. The cleaning head is moving<br />
along the printing cylinder and removes<br />
dust and ink. The distance to the<br />
printing cylinder can be set in micrometer<br />
steps through the touch panel.<br />
After cleaning the printing plates the cleaning head is moving back to an integrated cleaning station<br />
where the sponge is cleaned for the next usage.<br />
// What are the specialties<br />
• The cleaning head is cleaned inside the printing machine<br />
longer usage of 1 cleaning head without exchange<br />
• The cleaning head is flexible to the printing plates thickness<br />
Less set up time for each job necessary<br />
• The cleaning head can be cleaned outside the machine<br />
Reduction of the spare part cost<br />
• You can add for final cleaning the Duo-Technik Final Cleaning Station (FCS)