Toro CT2120 and CT2140 Brochure (pdf - 1.2mb)
Toro CT2120 and CT2140 Brochure (pdf - 1.2mb)
Toro CT2120 and CT2140 Brochure (pdf - 1.2mb)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>CT2120</strong> &<br />
<strong>CT2140</strong><br />
Compact Triple Turf Mower<br />
Small in size<br />
Big on productivity
Compact in size<br />
The CT range has been designed to provide the solution to mowing operations in areas of<br />
restricted access <strong>and</strong> limited manoeuvrability. Featuring a narrow transport width of only 130cm<br />
(51.2”), the CT is ideally suited to applications where narrow access, gates <strong>and</strong> bollards prove to<br />
be a issue but with a cutting width of 212cm (83.5”) <strong>and</strong> independent cutter head lift, productivity<br />
remains at its optimum.<br />
Efficient Cooling<br />
The CT features a dual screen air-intake<br />
system designed to ensure optimum<br />
engine cooling <strong>and</strong> performance. The<br />
easy to replace air-intake screens filter<br />
the debris, allowing only those particles<br />
small enough to pass through the<br />
radiator.<br />
A swing-out oil cooler also features<br />
resulting in easy cleaning of the whole<br />
radiator face <strong>and</strong> both sides of the oil<br />
cooler.<br />
<strong>CT2120</strong> & <strong>CT2140</strong> Compact Triple Turf Mower<br />
Outst<strong>and</strong>ing Service Access<br />
The CT is unrivaled when it comes to service access. With<br />
a tilting operator platform, engine cover <strong>and</strong> the ability<br />
to easily remove the storage pod <strong>and</strong> centre bulkhead for<br />
more detailed maintenance. The CT results in an easier <strong>and</strong><br />
cleaner working environment that ultimately results in a<br />
reduced down-time <strong>and</strong> cost effective operation.<br />
Available in 2 or 4 wheel drive configurations as the <strong>CT2120</strong> <strong>and</strong> <strong>CT2140</strong>, the CT’s feature the<br />
current, proven Mk3 200mm (8”) cutting units in numerous blade configurations, providing<br />
flexibility to suit the mowing environment. The new OPS (Overheat Protection System) <strong>and</strong><br />
optional LSDL (Limited Slip Diff Lock) also feature on this product.<br />
Removable Storage Pod <strong>and</strong><br />
bulkhead further improve access.<br />
<strong>CT2120</strong> & <strong>CT2140</strong><br />
• Kubota® 19.4 kW (26 hp) diesel engine<br />
• 212 cm (83.5”) width of cut<br />
• 2WD Transmission System - <strong>CT2120</strong><br />
• 4WD Transmission System - <strong>CT2140</strong><br />
Operator Environment<br />
With operators spending more time<br />
in the seat, the CT series has been<br />
developed with their comfort in mind.<br />
An ergonomically designed control<br />
console <strong>and</strong> foot pedal layout, adjustable<br />
suspension seat <strong>and</strong> steering column<br />
ensure operator comfort <strong>and</strong> reduced<br />
fatigue.<br />
Compact Size<br />
With the ability to access the most confined environments,<br />
the CT series offers the ideal solution for applications such<br />
as schools, cemeteries <strong>and</strong> caravan parks.<br />
Combined with a low overall weight, the CT’s are ideal<br />
for transporting on trailers, flat bed vans or, even within<br />
st<strong>and</strong>ard panel vans* - allowing use without the need of a<br />
commercial vehicle license.<br />
*specific models apply<br />
Power & Performance<br />
A Kubota® 3-cylinder diesel engine<br />
coupled directly to a hydrostatic<br />
transmission pump provides outst<strong>and</strong>ing<br />
performance in a multitude of cutting<br />
applications <strong>and</strong> conditions. Featuring<br />
the new LSDL system (Limited Slip Diff<br />
Lock), this optional addition provides<br />
added versatility <strong>and</strong> traction in extreme<br />
conditions.<br />
High ground clearance<br />
of 210mm (8.2”).<br />
Enhanced Turf Care<br />
The CT series features the unique limited lift in reverse<br />
function. This system results in the systematic lifting of<br />
the cutting units to the cross-cut position when reverse is<br />
selected. Ensuring after-cut appearance <strong>and</strong> quality remain<br />
at their optimum.<br />
ECM (Electronic Control Module)<br />
The ECM provides many benefits including; on-board<br />
machine diagnostics, <strong>and</strong> also the OPS (Overheat Protection<br />
System). This system provides both a visual <strong>and</strong> audible<br />
warning of a potential overheat, shutting down the cutter<br />
units to prevent engine damage. Operation resumes once<br />
the engine temperature falls to operating parameters.
Specifications - <strong>CT2120</strong> & <strong>CT2140</strong> Compact Triple Turf Mower<br />
Specifications <strong>CT2120</strong> <strong>CT2140</strong><br />
Engine Kubota ® D1105 Diesel 3-cylinder indirect injection, electric start<br />
Rating 18.7 kW (25 hp) net @ 3000rpm<br />
Fuel Diesel<br />
Cooling Water cooled<br />
TRANSMISSION Closed loop hydrostatic<br />
Drive system <strong>CT2120</strong> - 2WD<br />
2<br />
Ground pressure 0.7 - 1.41 kg/cm (10 - 20 psi) Depending on turf conditions<br />
Steering Hydrostatic rear wheel steering with shockload protection<br />
Brakes Hydrostatic service brakes using oil Immersed disc brakes<br />
Fuel system 45.7 Litres (10 UK Gallons)<br />
TYRES: Front 23 x 10.5 - 12, 4 - Ply Turf pattern<br />
TYRES: Rear 18 x 9.50 - 8, 4 - Ply Turf pattern<br />
GROUND SPEED: Transport 22 km/h (0 - 14 mph) Forward; 11 km/h (0 - 7 mph) Reverse<br />
GROUND SPEED: Mowing 11 km/h (0 - 7 mph) Forward; 6.5 km/h (0 - 4 mph) Reverse<br />
<strong>CT2140</strong> - 4WD<br />
H<strong>and</strong> throttle - Key ignition switch - Cutting unit drive switch - Parking brake (electronic) - Twin forward <strong>and</strong> reverse pedals - H<strong>and</strong><br />
Controls operated horn - Adjustable steering wheel - Independent cutter head lift - Limited lift function - Limited lift in reverse (On/Off switch) -<br />
Cutterhead weight transfer - Front roller with Smooth or Grooved rollers for floating configuration<br />
Seat (st<strong>and</strong>ard) Fixed back seat with mechanical suspension, armrests <strong>and</strong> 2-point recoil lap belt<br />
ROPS* Folding 2 Post ROPS Frame (designed <strong>and</strong> tested to EU directive 79/622/EEC)<br />
Lighting kit with brake lights - LSDL (Limited Slip Diff Lock) system - Beacon kit - Blower/Tool carrier kit - 12-Volt electrical accessory<br />
Options port - Waste bin kit - Tool box kit - Deluxe seat (includes lumbar support, adjustable back rest & head rest) - Full weather ROPS Cab -<br />
Kevlar tyre kit - Cleated tyre kit<br />
Cutting unit drive disengages when operator leaves seat. Engine starts only when forward / reverse pedal is in neutral, the parking brake<br />
Operator Safety<br />
is applied <strong>and</strong> the cutting units are disengaged. Cutter units can only be lowered upon activation of the cutter reels.<br />
Warning light indicators Engine temperature - Hydraulic oil temperature - Engine oil pressure - Battery - Glow Plug<br />
Interlock lights Parking brake - Cutters On/Off - Neutral<br />
Gauges Fuel tank level indicator - Hydraulic oil tank sight glass - Digital hourmeter<br />
CUTTING UNITS<br />
Type MK3 fully interchangeable cutting unit - 762 mm (30’’) width<br />
Configuration MK3 200 mm (8”) Fixed <strong>and</strong> Floating<br />
Cutting cylinder 4, 6 or 8 or 10 blade 200 mm (8’’) diameter<br />
Clip frequency<br />
4 blade: 23 cuts/m (21 cuts/yd) at 11 km/h (7 mph)<br />
6 blade: 34 cuts/m (31 cuts/yd) at 11 km/h (7 mph)<br />
8 blade: 46 cuts/m (42 cuts/yd) at 11 km/h (7 mph)<br />
Cylinder drive Direct drive hydraulic motor<br />
Cutting unit lift Fully independent hydraulic lift<br />
Cylinder to bedknife H<strong>and</strong>wheel adjustment<br />
Cylinder speed 1050 rpm approx.<br />
Height of cut Spanner adjustment 12 - 80mm (1/2’’ - 3 1/8’’)<br />
Rear rollers Smooth 76 mm (3’’) diameter<br />
Weight** 1165kg (2568Ibs)<br />
Turning Circle 1,000 mm (39.4”)<br />
Uncut Circle 1,280 mm (48.4”)<br />
Warranty Two-year limited<br />
Certification CE Certified<br />
1200kg (2645 lbs)<br />
* Approved folding 2 post ROPS frame is fitted as st<strong>and</strong>ard, unless otherwise<br />
specified with a ROPS cab.<br />
**All weights include: 2 post ROPS, 8 inch 6 blade cutterheads <strong>and</strong> with a full tank<br />
of fuel. It excludes the operator <strong>and</strong> any other options.<br />
PROFESSIONAL SERVICES<br />
Training<br />
Technical Service <strong>and</strong> Operator Courses are available. Contact our After Sales Team for more<br />
details on the number below.<br />
1785 mm (70.3’’)<br />
2290 mm (90’’)<br />
Genuine Parts<br />
Keep the productivity <strong>and</strong> performance of your equipment at its peak by using genuine<br />
replacement parts. Find <strong>and</strong> identify your replacement parts online at www.hayter.co.uk<br />
1525mm (60’’)<br />
2860 mm (112.6’’)<br />
3135 mm (123.4”)<br />
1300 mm (51.2’’)<br />
2120 mm (83.5’’)<br />
2350 mm (92.5’’)<br />
For more information or to arrange a demonstration contact:<br />
Hayter Limited<br />
Spellbrook, Bishop's Stortford, Hertfordshire.<br />
Engl<strong>and</strong> CM23 4BU<br />
Tel: +44 (0) 1279 723444<br />
Fax: +44 (0) 1279 600338<br />
email: sales@hayter.co.uk<br />
www.hayter.co.uk<br />
Products depicted in this brochure are<br />
for demonstration purposes only. Actual<br />
products offered for sale may vary.<br />
©2010 The <strong>Toro</strong> Company<br />
8111 Lyndale Ave. S.<br />
Bloomington, MN 55420-1196<br />
GB Part No. 200-4635 B.<br />
www.toro.com