Hinges & Fittings for side hung Windows and Doors

5
WINDOW HINGE
IPA No. 61774
ORDERING NO.
C
MATERIAL
SURFACE
A
IPA NO.
STEEL FIXED STEEL PIN
STEEL FIXED BRASS PIN
SQUARE EDGES LEFT
SQUARE EDGES RIGHT
GALVANIZED
INDUSTRY PACKING
IN BOXES OF 100 PIECES
A MM
B MM
C MM
MATERIAL MM
PIN MM
SCREW
APPROX. WEIGHT
KG / PC.
61774 2 3 3 4 87 2 90 37 37 2.5 8 4.0 0.17
B
IPA No. 61774
FITTING INSTRUCTIONS
16
26
REHAU NORDIC DESIGN PROFILE
12.1
5
9
FIG. 1
FIG. 2
12.2
16.5
USE SCREW NO. 4.0.
MAINTENANCE:
TEST THE OPERATION FROM TIME TO TIME. WHEN FITTING - GREASE THE PIVOT/MOVABLE METAL PARTS OF
THE MECHANISM WHILE ACTIVATING REPEATEDLY. HEREAFTER GREASE MINIMUM TWICE A YEAR. SEE ALSO
INSTRUCTIONS ON PAGE 28-29.

6
DOOR HINGE
IPA No. 61798
C
ORDERING NO.
MATERIAL
SURFACE
A
IPA NO.
STEEL FIXED STEEL PIN
STEEL FIXED BRASS PIN
SQUARE EDGES LEFT
SQUARE EDGES RIGHT
GALVANIZED
INDUSTRY PACKING
IN BOXES OF 50 PIECES
61798 2 3 3 4 87 2 120 58 42.5 4.0 9.5 5.0 0.45
A MM
B MM
C MM
MATERIAL MM
PIN MM
SCREW
APPROX. WEIGHT
KG / PC.
B
IPA No. 61798
FITTING INSTRUCTIONS
16
REHAU NORDIC DESIGN PROFILE
26
12.1
5
9
FIG. 1 FIG. 2
12.2
16.5
USE SCREW NO. 5.0.
MAINTENANCE:
TEST THE OPERATION FROM TIME TO TIME. WHEN FITTING - GREASE THE PIVOT/MOVABLE METAL PARTS OF
THE MECHANISM WHILE ACTIVATING REPEATEDLY. HEREAFTER GREASE MINIMUM TWICE A YEAR. SEE ALSO
INSTRUCTIONS ON PAGE 28-29.

7
ADJUSTABLE DOOR HINGE
IPA No. 60798
ORDERING NO.
MATERIAL
SURFACE
IPA NO.
STEEL FIXED STEEL PIN
SQUARE EDGES LEFT
SQUARE EDGES RIGHT
GALVANIZED
INDUSTRY PACKING
IN BOXES OF 50 PIECES
A MM
B MM
C MM
MATERIAL MM
PIN MM
SCREW
APPROX. WEIGHT
KG / PC.
60798 2 3 4 87 2 120 58 2.5 4 9.5 5.0 0.49
■
ADJUSTABLE HORISONTALLY AND VERTICALLY
C
A
B
RIGHT

8
IPA No. 60798
FITTING INSTRUCTIONS
UPPER HINGE PART
REHAU NORDIC DESIGN PROFILE
LOWER HINGE PART
16
26
5
9
FIG. 1
12.1
ADJUSTMENT PLATE
FITTING:
1. MOUNT THE ADJUSTMENT PLATE IN THE GROOVE OF
THE DOOR IN THE MIDDLE OF WHERE THE LOWER
HINGE PART IS BEING MOUNTED.
2. PLACE HINGE SO THAT THE LOWER HINGE PART IS
OVER THE ADJUSTMENT PLATE AND FASTEN IT. THE
ADJUSTMENT SCREWS SHOULD BE LOOSENED.
12.2
16.5
FIG. 2
ADJUSTMENT:
VERTICALLY:
ADJUST TO WANTED POSITION ON
THE LARGE SCREW AT THE BOTTOM
OF THE HINGE - ±3 MM.
HORIZONTALLY: LOOSEN THE MOUNTING SCREWS
AND ADJUST TO WANTED POSITION.
FASTEN THE MOUNTING SCREWS.
MAINTENANCE:
TEST THE OPERATION FROM TIME TO TIME. WHEN
FITTING - GREASE THE PIVOT/MOVABLE METAL PARTS OF
THE MECHANISM WHILE ACTIVATING REPEATEDLY.
HEREAFTER GREASE MINIMUM TWICE A YEAR. SEE ALSO
INSTRUCTIONS ON PAGE 28-29.

SIDE SWING WINDOW 90 0
WITH FRICTION
IPA No. 62795
9
ORDERING NO.
MATERIAL
SURFACE
IPA NO.
STEEL
LEFT
RIGHT
ELECTROPLATED
STANDARDPACKING
IN BOXES OF 5 SETS
A MM
B MM
C MM
SCREW
APPROX. WEIGHT
KG / SET
62795 1 7 8 21 1 23 29.5 325 4.0 0.50
■
ADJUSTABLE FRICTION
■
CONVENIENT FOR CLEANING
A
B
■
SWINGS 90°
■
OPENS CLEAR FROM CURTAINS
AND WINDOW FRAME
■
MAX. VENTILATION
■
CONCEALED FITTINGS
■
ANODIZED ALUMINIUM RAILS
C
TOP FITTING
BOTTOM FITTING
1 SET
RIGHT HAND
FIRE-ESCAPE OPENING:
500 MM FROM SASH HEIGHT 726 MM

10
IPA No. 62795
FITTING INSTRUCTIONS
REHAU NORDIC DESIGN PROFILE
16
2.5
5
9
16.5
FIG. 2
HORIZONTAL PLAN
HINGE SIDE
FITTING SHOWN ON FRAME CILL
RIGHT HAND ILLUSTRATION
IPA NO. 62795
MAX. SASH WEIGHT KGS 40
FIG. 1
VERTICAL PLAN
MIN. SASH WIDTH 315
MAX. SASH WIDTH 820
SCREW 4,0
FIG. 3
FITTING:
1. THE FITTING SHOULD BE POSITIONED IN THE GROOVES AT HEAD AND CILL OF FRAME AND
SCREWED ON (FIGURE 1 AND 2)
2. NOW PUSH THE WINDOW SASH INTO POSITION BY SASH SLOTS AND FASTEN THE SCREWS.
3. THE FRICTION CAN NOW BE ADJUSTED ON THE TOP FITTING. IF A LARGER OPENING IS WANTED
THEN JUST MOVE THE ADJUSTABLE STOP FITTING IN THE TOP FRAME ALUMINIUM RAIL.
MAINTENANCE:
THE FITTINGS ARE NOT TO BE PAINTED. TEST THE OPERATION FROM TIME TO TIME. WHEN FITTING -
LUBRICATE THE PIVOT/MOVABLE METAL PARTS OF THE MECHANISM WHILE ACTIVATING REPEATEDLY.
HEREAFTER LUBRICATE MINIMUM TWICE A YEAR. DO NOT LUBRICATE THE ALUMINIUM RAILS. SEE ALSO
INSTRUCTIONS ON PAGE 28-29.

SIDE SWING WINDOW 90 0
WITH FRICTION
IPA NO. 62796-97 - adjustable
11
ORDERING NO.
B
A
IPA NO.
MATERIAL
STEEL
LEFT
RIGHT
SURFACE
ELECTROPLATED
STANDARD PACKING
IN BOXES OF 5 SETS
62796 1 7 8 21 1 17 23 247 4,0 0.36
62797 1 7 8 21 1 17 23 377 4.0 0.56
A MM
B MM
C MM
SCREW
WEIGHT APPROX.
KG / SET
■
■
■
■
■
■
■
ADJUSTABLE FRICTION
CONVENIENT FOR CLEANING
SWINGS 90°
OPENS CLEAR FROM CURTAINS
AND WINDOW FRAME
MAX. VENTILATION
CONCEALED FITTINGS
ANODIZED ALUMINIUM RAILS
C
TOP FITTING
BOTTOM FITTING
FIRE-ESCAPE OPENING IPA NR. 62796:
500 MM FROM SASH HEIGHT 706 MM
1 SET
RIGHT
FIRE-ESCAPE OPENING IPA NR. 62797:
500 MM FROM SASH HEIGHT 750 MM
600 MM FROM SASH HEIGHT 855 MM

12
IPA NO. 62796-97
FITTING INSTRUCTIONS
16
REHAU NORDIC DESIGN PROFILE
ECCENTRIC SCREW
FITTING SHOWN ON TOP
FRAME CILL - RIGHT HAND
ILLUSTRATION
2.5
5
9
ADJUSTMENT PLATE
MARK
HINGE SIDE
16.5
FIG. 2
HORIZONTAL PLAN
FITTING SHOWN
ON BOTTOM FRAME
CILL - RIGHT HAND
ILLUSTRATION
HINGE SIDE
FITTING:
FIG. 1
VERTICAL PLAN
IPA NO. 62796 62797
MAX. SASH WEIGHT KGS 30 40
MIN. SASH WIDTH 240 370
MAX. SASH WIDTH 750 835
SCREW 4.0 4.0
FIG. 3
1. THE FITTING SHOULD BE POSITIONED IN THE GROOVES AT HEAD AND CILL OF FRAME AND
SCREWED ON (FIGURE 1 AND 2)
2. NOW PUSH THE WINDOW SASH INTO POSITION BY SASH SLOTS AND FASTEN THE SCREWS.
3. THE FRICTION CAN NOW BE ADJUSTED ON THE TOP FITTING. IF A LARGER OPENING IS WANTED
THEN JUST MOVE THE ADJUSTABLE STOP FITTING IN THE TOP FRAME ALUMINIUM RAIL.
4. THE SASH CAN BE ADJUSTED ±1.5 MM SIDEWAYS. BEFORE ANY ADJUSTMENT THE MOUNTING SCREW IN THE
ADJUSTMENT PLATE IN THE TOP OF THE FRAME HAVE TO BE LOOSENED. THEN ADJUST BY USING A TORX-20
KEY TO TURN THE ECCENTRIC SCREW. BY DELIVERY THE MARK ON THE ECCENTRIC SCREW IS IN A 90 0
POSITION COMPARED TO THE FITTING, WHICH INDICATING THE 0-POSITION. THE ECCENTRIC SCREW CAN BE
TURNED 90 0 TO EACH SIDE, WHICH GIVES THE MAXIMUM ADJUSTMENT OF 1½ MM. AFTER THE ADJUSTMENT
THE MOUNTINGSCREW IN THE ADJUSTMENT PLATE IS FASTENED.
MAINTENANCE:
THE FITTINGS ARE NOT TO BE PAINTED. TEST THE OPERATION FROM TIME TO TIME. WHEN FITTING - LUBRICATE
THE PIVOT/MOVABLE METAL PARTS OF THE MECHANISM WHILE ACTIVATING REPEATEDLY. HEREAFTER LUBRICATE
MINIMUM TWICE A YEAR. DO NOT LUBRICATE THE ALUMINIUM RAILS. SEE ALSO INSTRUCTIONS ON PAGE 28-29.