igo t 70.pdf - Compass Equipment

Igo T 70 

product 

guide 

contents 

features 

• 8,818 lb (4 000 kg) maximum capacity 

• 2,866 lb (1 300 kg) capacity at 131 ft (40 m) 

• 131 ft (40 m) maximum operating hook 

radius 

• 146 ft (44.5 m) maximum hook height with 

jib set at 30˚ 

• 105 ft (32 m) maximum hook height with jib 

horizontal 

• Variable height mast from 49 ft (15 m) to 

105 ft (32 m) with optional mast inserts 

Features 2 

Specifications 3 

Transport 4 

Weights 5 

Dimensions 6 

Crane Profile 7 

www.manitowoccranegroup.com 

*Product may be shown with optional equipment. 

Load Charts 8 

Metric Dimensions 11 

Metric Crane Profile 12 

Metric Load Charts 13 

Mechanical Data 16 

Symbols Glossary 17

features 

2 

The optional Vision 140CN attaches 

to the crane at a fixed height. 

Controls are integrated in the cab 

and operator’s seat provides 

ergonomic comforts from an aerial 

position. 

Increase your working height by up to 39.4 ft 

(12 m) with optional mast inserts. Each insert is 

19.7 ft (6 m) and provides the operator with two 

(2) additional heights under hook. 

Simplify road transport with Potain’s 

optional transport axle set, SL122 / J215M, 

and adaptation kit 203. This trailer adjusts 

pneumatically and travels at speeds up to 

50 MPH (80 KPH). 

Igo T 70 

Standard wireless radio 

remote control with 

indicators and auxiliary 

control unit can be 

supplemented with an 

optional tethered 

joystick control unit with 

a 98 ft (30 m) cable.

specifications 

Jib 

Jib 

94 ft (28.5 m) radius standard tri-folding offsettable lattice jib. 

Two (2) tie bar lines with adjustable lengths allow jib to be offset 

to 30˚. Opening and aligning are carried out automatically by 

three (3) hydraulic cylinders. 

Jib 

*Optional Jib Extensions 

Extension 

Two (2) removable jib extensions allow for a radius of 115 ft (35 

m) or maximum radius of 131 ft (40 m). 

T-Mast 

Telescoping lattice mast is made vertical by one (1) hydraulic 

cylinder. Hook heights of 49 ft (15 m), 56 ft (17 m), and 66 ft (20 

m) achievable with standard mast. 360˚ rotation possible during 

raising sequence. 

T-Mast *Optional Mast Inserts 

Two (2) 20 ft (6 m) mast inserts available to reach a maximum 

hook height of 105 ft (32 m). Increasing mast height with one 

insert provides hook heights of 75 ft (23 m) and 85 ft (26 m); 

second mast insert provides hook heights of 95 ft (29 m) and 

105 ft (32 m). 

Chassis 

Outriggers swing and lock into position. 14 ft 8 in (4.5 m) square 

outrigger spread with 8.9 ft (2.7 m) slewing radius. Outrigger 

pads are stowed on the crane during transport (23.6 in x 23.6 in 

[600 mm x 600 mm]). 

*Ballast 

Ballast requirement for the crane consists of, at minimum, 14 

slabs each weighing 4,850 lb (2 200 kg). An additional slab is 

required if cab is mounted as well as another if mast insert(s) are 

used. 

Anemometer 

*Optional Anemometer 

Electronic wind speed meter to alert the operator of wind speed 

conditions. Provides selective display on the radio remote. 

Crane can be operated in speeds up to 45 MPH (72 KPH) and 

weather vane in winds up to 93 MPH (150 KPH). 

Swing 

RVF 51 Optima +: slewing mechanism with maximum swing 

speed of 0.8 RPM. Progressive control of speed with counterslewing 

possible, anti-load swinging system makes aligning the 

load with the jib easier. Multiple RPM speeds possible 

depending upon parameter selected. 

Hoist 

15 LVF 11 Optima: 15 HP variable frequency hoist with 1.2 USt 

(1.1 t) line pull. 3 notch, progressive speed change according to 

the accelerating or decelerating ramps. Optima allows the hoist 

to adapt its speed to the weight of the load. 

Trolley 

3 DVF 5: 3 HP variable frequency hoist with 1,102 lb (500 kg) line 

pull. 3 notch winch, progressive speed change according to 

acceleration or deceleration ramps controlled by the frequency 

converter. 

Hydraulic 

Equipment 


Hydraulic cylinders are used for raising the mast, unfolding the 

jib, and slewing the derrick. All actions are carried about by the 

remote control. 

Transport *Optional Axle Transport Axle Sets 

Axle sets are available for both jobsite and highway applications. 

Jobsite axles are rated at either 6 MPH (10 KPH) or 15.5 MPH 

(25 KPH); highway axle set is rated at 50 MPH (80 KPH). 

3 

Ballasting *Optional Hydraulic Ballasting Derrick 

Derrick 

Removable and able to be used on other Igo T 70 units, the 

hydraulic ballasting derrick uses the hoisting winch and is 

controlled by the remote control. 

Electrical 

Requirement 

Requirement 

480 volt, 60 Hz measured at the turntable. Earth rod and electric 

cable stowed on the crane during transport. 

Reeving 

SM/DM block for 2 (SM) or 4-part line (DM). Manual removal of 

one pin to change between SM and DM. 

Controls 

Wireless remote control provides information to the operator 

about **wind speed, radius, hook height, load, and moment. 

Lights and buzzers alert the operator when nearing limits of 

operation. Battery charger and extra battery are provided with 

crane. 

Auxiliary remote attached by umbilical cord ensures continual 

operation in case of battery or other malfunction of the wireless 

remote control. 

*Optional Equipment 

* STANDARD NORTH AMERICAN SPECIFICATION: includes 

131 ft (40 m) jib, offsettable jib, two (2) mast inserts, sole 

plates with screw jacks and Dialog Wind (anemometer). 

* Mast inserts 19.7 ft (6 m) 

* Outrigger pads with screw jacks for transport equipment 

* Fixed height cab 

* Access ladders 

* Transport axles and kits 

* Top Zone 

* Top Tracing 

Consult price list for additional options 

**Requires optional anemometer 

Igo T 70 

*Denotes optional equipment

transport 

4 

DJ100 / S120 

6 MPH / 10 KPH 

DJ105 / S125 

15.5 MPH / 25 KPH 

Igo T 70 

NOTE: Dimensions and weights may vary due to manufacturing tolerances.

weights 

SL122 / J215M 

50 MPH / 80 KPH 

5 

*Other axle sets are available. 

Chassis Data (in transport position) 

DJ100 / S120 


DJ105 / S125 

15.5 MPH / 25 KPH 

SL122 / J215M 

50 MPH / 80 KPH 

(feet) (meters) (feet) (meters) (feet) (meters) 

Overall Length 49.08 14.96 49.08 14.96 45.14 13.76 

Overall Height 12.01 3.66 12.01 3.66 12.99 3.96 

Overall Width 8.20 2.50 8.20 2.50 8.20 2.50 

Overhang 14.34 4.37 14.34 4.37 16.19 4.935 

Weights 

Crane Weight 

less Counterweight: 

Couterweight 

for Operation (14 slabs): 

Crane with Counterweight: 

36,155 lb 16,400 kg 

67,901 lb 30,800 kg 

104,056 lb 47,200 kg 

Crane with Transport Equipment 

DJ100 / S120 


DJ105 / S125 

15.5 MPH / 25 KPH 

SL122 / J215M 

50 MPH / 80 KPH 

In Transport with (pounds) (kilograms) (pounds) (kilograms) (pounds) (kilograms) 

no counterweight: 

Gross (P) 37,412 16,970 38,051 17,260 41,578 18,860 

Rear (P1) 21,032 9,540 21,495 9,750 29,365 13,320 

Front (P2) 16,380 7,430 16,556 7,510 12,213 5,540 

Igo T 70 

NOTE: Dimensions and weights may vary due to manufacturing tolerances.

dimensions 

6 

Igo T 70 

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, 

operating instructions and other instructional plates must be read and understood prior to operating the crane.

crane profile 

7 

*There are two possible profiles for the Igo T 70 that are beneficial for erecting and dismantling on congested job sites. 


operating instructions and other instructional plates must be read and understood prior to operating the crane. 

Igo T 70

load charts 

Igo T 70 

8 

Chart 1 

Jib Configuration: L40 with maximum hook reach of 131 ft at 0˚ 

Hook Reach (ft) 10.2 52.5 59.1 65.6 72.2 78.7 85.3 86.0 91.9 98.4 105 112 118 125 131 

Reeving 

Capacities (lb) 

SM 

4,894 4,894 4,894 4,894 4,894 4,894 4,894 4,894 4,475 4,101 3,792 3,527 3,285 3,064 2,866 

DM 

8,818 8,818 7,650 6,746 5,997 5,401 4,894 4,894 4,475 4,101 3,792 3,527 3,285 3,064 2,866 

Chart 2 

Chart 1 


Jib Configuration: Hook L35Reach with maximum (ft) 10.2hook52.5 reach of 59.1 115 ft at 65.60˚ 

72.2 78.7 85.3 86.0 91.9 98.4 105 112 118 125 131 

Reeving 


Hook Reach (ft) 10.2 SM 56.8 59.1 4,894 65.6 4,894 72.2 4,894 78.7 4,894 85.3 4,894 91.9 4,894 93.2 4,894 98.4 4,894 105 4,475 112 4,101 115 3,792 3,527 3,285 3,064 2,866 

Reeving 

Chart 1 

DM 

8,818 8,818 7,650 6,746Capacities 5,997(lb) 

5,401 4,894 4,894 4,475 4,101 3,792 3,527 3,285 3,064 2,866 

SM 

4,850 4,850 4,850Jib 4,850 Configuration: 4,850 L40 4,850with4,850 maximum 4,850 hook4,850 reach of 4,519 131 ft at 4,189 0˚ 3,880 3,748 

DM Chart 8,8182 

8,818 8,378 7,385 6,592 5,930 5,379 4,916 4,850 4,519 4,189 3,880 3,748 

Hook Reach (ft) 10.2 52.5 59.1 65.6 72.2 78.7 85.3 86.0 91.9 98.4 105 112 118 

Jib Configuration: L35 with maximum 

Chart 3 

Reeving hook reach of 115 ft at 0˚ 


ChartSM 

4,894 4,894 4,894 4,894 4,894 4,894 4,894 4,894 4,475 4,101 3,792 3,527 3,28 

Jib Configuration: Hook L30.5 Reach with(ft) maximum 10.2 hook 56.8reach 1 59.1 of 100 65.6 ft at 0˚ 72.2 78.7 85.3 91.9 93.2 98.4 105 112 115 

DM 

8,818 8,818 7,650 

Reeving Jib Configuration: L40 with maximum hook 

Capacities 

6,746 

reach 

(lb) 

5,997 5,401 4,894 4,894 4,475 4,101 3,792 3,527 3,28 

of 131 ft at 0˚ 

Hook Reach (ft) 10.2 SM 60.7 65.6 4,850 72.2 4,850 78.7 4,850 85.3 4,850 91.9 4,850 98.4 4,850 100 4,850 4,850 4,850 4,519 4,189 3,880 3,748 

Reeving 

Chart 

Hook Reach 

2 

DM 

8,818 8,818 Capacities 8,378 (ft) 10.2 7,385 (lb) 52.5 6,592 59.1 5,930 65.6 5,379 72.2 4,916 78.7 4,850 85.3 4,519 86.0 4,189 91.9 3,880 98.4 3,748 105 112 118 

SM 

4,850 4,850 4,850Jib 4,850 Configuration: Reeving4,850 

L35 4,850with4,850 maximum 4,850 hook4,850 

reach of 115 ft at 0˚ Capacities (lb) 


8,818 8,047 7,165SM 

6,460 5,886 4,894 5,379 4,894 4,938 4,894 4,850 4,894 4,894 4,894 4,894 4,894 4,475 4,101 3,792 3,527 3,28 

Chart Hook Reach 

DM 

1 (ft) 10.2 56.8 59.1 65.6 72.2 78.7 85.3 91.9 93.2 98.4 105 112 115 

Jib Configuration: L30.5 with 

8,818 8,818 7,650 6,746 5,997 5,401 4,894 4,894 4,475 4,101 3,792 3,527 3,28 

Chart 4 

Reeving maximum hook reach of 100 ft at 0˚ 



ChartSM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,519 4,189 3,880 3,74 

Jib Configuration: Hook L28.5 Reach with(ft) maximum 10.2 hook 60.7reach 2 65.6 of 93.572.2 ft at 0˚ 78.7 85.3 91.9 98.4 100 

Hook Reach DM (ft) 10.2 8,818 52.5 

Reeving Jib Configuration: L35 withCapacities 8,818 59.1 8,378 

maximum 

(lb) 

65.6 7,385 72.2 6,592 78.7 5,930 85.3 5,379 86.0 4,916 91.9 4,850 98.4 4,519 105 4,189 112 3,880 118 3,74 

hook reach of 115 ft at 0˚ 

Hook Reach (ft) 10.2 63.0 65.6 72.2 Reeving78.7 85.3 91.9 93.5 


SM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 

Reeving 

Chart 

8,818 Hook 8,818 Reach SM 3 Capacities (ft) 10.2 4,894 (lb) 56.8 4,894 59.1 4,894 65.6 4,894 72.2 4,894 78.7 4,894 85.3 4,894 91.9 4,894 93.2 4,475 98.4 4,101 105 3,792 112 3,527 115 3,28 

DM 

8,047 7,165 6,460 5,886 5,379 4,938 4,850 

SM 

4,850 4,850 4,850Jib 4,850 Configuration: Reeving DM 4,850 L30.5 4,850 8,818 with 4,850 8,818 maximum 4,850 7,650 hook 6,746 reach5,997 of 100 ft 5,401 at Capacities 0˚ 4,894(lb) 

4,894 4,475 4,101 3,792 3,527 3,28 


8,818 8,400 7,496SM 

6,768 6,151 4,850 5,622 4,850 5,512 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,519 4,189 3,880 3,74 


DM 

2 (ft) 10.2 60.7 65.6 72.2 78.7 85.3 91.9 98.4 100 


8,818 8,818 8,378 7,385 6,592 5,930 5,379 4,916 4,850 4,519 4,189 3,880 3,74 

Chart 5 

Reeving maximum hook reach of 93.5 ft at 0˚ Capacities (lb) 


Jib Configuration: L40 with maximum hook ChartSM 

Hook Reach (ft) 10.2 63.0 reach 3 of 65.6 93.5 ft72.2 4,850 

at 0˚ 78.7 

4,850 

85.3 

4,850 

91.9 

4,850 

93.5 

4,850 4,850 4,850 4,850 4,850 


Reeving Jib Configuration: L30.5 with 

Capacities 

8,818 59.1 8,047 

maximum 

(lb) 

65.6 7,165 72.2 6,460 78.7 5,886 85.3 5,379 91.9 4,938 93.2 4,850 98.4 105 112 115 

hook reach of 100 ft at 0˚ 

Hook Reach (ft) 10.2 SM 54.8 59.1 4,850 65.6 4,850 

Reeving72.2 78.7 85.3 89.9 91.9 93.5 


4,850 4,850 4,850 4,850 4,850 4,850 

Reeving 

Chart 

DM 

8,818 Hook 8,818 Reach SM 4 Capacities 8,400 (ft) 10.2 4,850 

7,496 (lb) 60.7 4,850 

6,768 65.6 4,850 

6,151 72.2 4,850 

5,622 78.7 4,850 

5,512 85.3 4,850 91.9 4,850 98.4 4,850 100 4,850 4,519 4,189 3,880 3,74 

SM 

4,850 4,850 4,850Jib 4,850 Configuration: Reeving DM 4,850 L28.5 4,850 8,818 with 4,850 8,818 maximum 4,850 8,378 hook 4,740 7,385 reach4,630 

Capacities 6,592 of 93.55,930 (lb) ft at 0˚ 5,379 4,916 4,850 4,519 4,189 3,880 3,74 


8,818 8,069 7,099SM 

6,327 5,710 4,850 5,181 4,850 4,850 4,740 4,850 4,630 4,850 4,850 4,850 4,850 4,850 



DM 

3 (ft) 10.2 63.0 65.6 72.2 78.7 85.3 91.9 93.5 

hook8,818 reach of 

8,818 

93.5 ft 

8,047 

at 0˚ 

7,165 6,460 5,886 5,379 4,938 4,850 

Chart 6 

Reeving 


Jib Configuration: L30.5 with maximum hook reach of 100 ft at 0˚ 

Jib Configuration: Hook L35Reach with maximum (ft) 10.2hook ChartSM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 

54.8 reach 4 of 59.1 93.5 ft65.6 at 0˚ 72.2 78.7 85.3 89.9 91.9 93.5 


Reeving Jib Configuration: L28.5 with 

Capacities 

8,818 65.6 8,400 

maximum 

(lb) 

72.2 7,496 78.7 6,768 85.3 6,151 91.9 5,622 98.4 5,512 100 

hook reach of 93.5 ft at 0˚ 

Hook Reach (ft) 10.2 SM 54.8 59.1 4,850 65.6 4,850 

Reeving72.2 4,850 78.7 4,850 85.3 4,850 89.9 4,850 91.9 4,850 93.5 


4,850 4,740 4,630 

Reeving 

Chart 

DM 

8,818 Hook 8,818 Reach SM 5 Capacities 8,069 (ft) 10.2 7,099 

4,850 (lb) 63.0 6,327 

4,850 65.6 5,710 

4,850 72.2 5,181 

4,850 78.7 4,850 

4,850 85.3 4,740 

4,850 91.9 4,630 

4,850 93.5 4,850 4,850 

SM 

4,850 4,850 4,850Jib 4,850 Configuration: Reeving DM 4,850 L40 8,818with4,850 maximum 4,850 8,047 hook4,740 7,165 reach of 4,630 Capacities 6,460 93.5 ft5,886 (lb) at 0˚ 5,379 4,938 4,850 


8,818 8,069 7,099SM 

6,327 5,710 4,850 5,181 4,850 4,850 4,740 4,850 4,630 4,850 4,850 4,850 4,850 



DM 

4 (ft) 10.2 54.8 59.1 65.6 72.2 78.7 85.3 89.9 91.9 93.5 

hook8,818 reach of 

8,818 

93.5 ft 

8,400 

at 0˚ 

7,496 6,768 6,151 5,622 5,512 

Reeving 


Jib Configuration: L28.5 with maximum hook reach of 93.5 ft at 0˚ 

Hook Reach (ft) 10.2 ChartSM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,740 4,630 

54.8 5 59.1 65.6 72.2 78.7 85.3 89.9 91.9 93.5 


Reeving Jib Configuration: L40 withCapacities 8,818 65.6 8,069 

maximum 

(lb) 

72.2 7,099 78.7 6,327 85.3 5,710 91.9 5,181 93.5 4,850 4,740 4,630 

hook reach of 93.5 ft at 0˚ 

SM 

4,850 4,850 

Reeving 


4,850 4,850 4,850 4,850 4,850 4,850 4,740 4,630 

Chart 

DM 

8,818 Hook 8,818 Reach SM 6 

8,069 (ft) 10.2 4,850 

7,099 54.8 4,850 

6,327 59.1 4,850 

5,710 65.6 4,850 

5,181 72.2 4,850 

4,850 78.7 4,850 

4,740 85.3 4,850 

4,630 89.9 4,850 91.9 93.5 

Jib Configuration: Reeving DM L35 8,818with8,818 maximum 8,400 hook7,496 reach of Capacities 6,768 93.5 ft6,151 (lb) at 0˚ 5,622 5,512 

SM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,740 4,630 

Chart Hook Reach (ft) 10.2 54.8 59.1 65.6 72.2 78.7 85.3 89.9 91.9 93.5 

DM 

5 

8,818 8,818 8,069 7,099 6,327 5,710 5,181 4,850 4,740 4,630 

Reeving 


Jib Configuration: L40 with maximum hook reach of 93.5 ft at 0˚ 

ChartSM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,740 4,630 

6 

Hook Reach DM (ft) 10.2 8,818 54.8 8,818 59.1 8,069 65.6 7,099 72.2 6,327 78.7 5,710 85.3 5,181 89.9 4,850 91.9 4,740 93.5 4,630 

Jib Configuration: 

Reeving 

L35 with maximum hook reach of Capacities 93.5 ft (lb) at 0˚ 

Hook Reach SM (ft) 10.2 4,850 54.8 4,850 59.1 4,850 65.6 4,850 72.2 4,850 78.7 4,850 85.3 4,850 89.9 4,850 91.9 4,740 93.5 4,630 

Reeving DM 

8,818 8,818 8,069 7,099 Capacities 6,327 5,710 (lb) 5,181 4,850 4,740 4,630 

SM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,740 4,630 

ChartDM 

6 

8,818 8,818 8,069 7,099 6,327 5,710 5,181 4,850 4,740 4,630 



operating instructions and other instructional Hook Reach plates (ft) must 10.2 be read 54.8 and understood 59.1 65.6prior to 72.2operating 78.7 the 85.3 crane. 89.9 91.9 93.5 

Reeving 


SM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,740 4,630 

DM 

8,818 8,818 8,069 7,099 6,327 5,710 5,181 4,850 4,740 4,630

Jib Configuration: L28.5 with maximum hook reach of 93.5 ft at 0 

Hook Reach (ft) 10.2 63.0 65.6 72.2 78.7 85.3 91.9 93.5 

Reeving 


SM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 

DM 

8,818 8,818 8,400 7,496 6,768 6,151 5,622 5,512 

Chart 5 


load charts 

Hook Reach (ft) 10.2 54.8 59.1 65.6 72.2 78.7 85.3 89.9 91.9 93.5 

Reeving 


SM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,740 4,630 

DM 

8,818 8,818 8,069 7,099 6,327 5,710 5,181 4,850 4,740 4,630 

Chart 6 


Hook Reach (ft) 10.2 54.8 59.1 65.6 72.2 78.7 85.3 89.9 91.9 93.5 

Reeving 


SM 

4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,850 4,740 4,630 

DM 

8,818 8,818 8,069 7,099 6,327 5,710 5,181 4,850 4,740 4,630 

9 

Chart 7 


Hook Reach (ft) 10.2 75.1 82.0 91.9 102 114 

Reeving 


SM 4,850 4,850 4,343 3,770 3,329 2,866 

DM 

Chart 7 


Chart 8 

Hook Reach (ft) 10.2 75.1 82.0 91.9 102 114 

Jib Configuration: Reeving L35 with maximum hook reach of Capacities 99.7 ft (lb) at 30˚ 


SM 7 (ft) 10.2 

4,850 

81.0 

4,850 

85.3 

4,343 

91.9 

3,770 

100 

3,329 2,866 

Jib Configuration: Reeving 

DM L40 with maximum hook reach of Capacities 114 ft at (lb) 30˚ 

SM 4,850 4,850 4,542 4,145 3,748 

Chart Hook Reach 8 (ft) 10.2 75.1 82.0 91.9 102 114 

DM 

Jib Configuration: Reeving L35 with maximum hook reach of 

Capacities 

99.7 ft 

(lb) 

at 30˚ 

SM 9 

4,850 4,850 4,343 3,770 3,329 2,866 

Chart Hook Reach DM 

7 (ft) 10.2 81.0 85.3 91.9 100 

Jib Jib Configuration: Reeving L30.5 L40 with withmaximum maximumhook hookreach reachof Capacities of 114 86.9 ft at (lb) ft at 30˚ 30˚ 


SM 8 (ft) 10.2 

4,850 

86.9 

4,850 4,542 4,145 3,748 

Hook Reach 

Reeving 

DM 

(ft) 10.2 75.1 82.0 91.9 102 114 

Jib Configuration: Capacities (lb) 

Reeving 

L35 with maximum hook reach of 

Capacities 

99.7 ft 

(lb) 

at 30˚ 

SM 4,850 4,850 

Chart Hook Reach SM 9 (ft) 10.2 4,850 81.0 4,850 85.3 4,343 91.9 3,770 100 3,329 2,866 

DM 

Jib Configuration: Reeving DM 

L30.5 with maximum hook reachCapacities of 86.9 

(lb) 

ft at 30˚ 

SM 10 4,850 4,850 4,542 4,145 3,748 


8 (ft) 10.2 86.9 

Jib Jib Configuration: Reeving L28.5 L35 with withmaximum maximumhook hookreach reachof Capacities of 99.7 81.4ft (lb) ft at at 30˚ 30˚ 


SM 9 (ft) 10.2 

4,850 

81.4 

4,850 

Hook Reach 

Reeving 

DM 

(ft) 10.2 81.0 85.3 91.9 100 

Jib Configuration: (lb) 

Reeving 


(lb) 

ft at 30˚ 

SM 4,850 4,850 

Chart Hook Reach SM 10 (ft) 10.2 4,850 86.9 4,850 4,542 4,145 3,748 

DM 



(lb) 

ft at 30˚ 

SM 11 4,850 4,850 


9 (ft) 10.2 81.4 

Jib Jib Configuration: Reeving L40 L30.5 with with maximum maximumhook hook reach reach of Capacities of 81.4 86.9 ft (lb) at ft at 30˚ 30˚ 


SM 10 (ft) 10.2 

4,850 

81.4 

4,850 

Hook Reach 

Reeving 

DM 

(ft) 10.2 86.9 

Jib Configuration: (lb) 

Reeving 


(lb) 

ft at 30˚ 

SM 4,850 4,850 

Chart Hook Reach SM 11 (ft) 10.2 4,850 81.4 4,850 

DM 



Capacities 

81.4 ft 

(lb) 

at 30˚ 

SM 12 4,850 4,850 


10 (ft) 10.2 81.4 

Jib Jib Configuration: Reeving L35 L28.5 with with maximum maximumhook hook reach reach of Capacities of 81.4 81.4 ft (lb) at ft at 30˚ 30˚ 


SM 11 (ft) 10.2 

4,850 

81.4 

4,850 

Hook Reach 


DM 

(ft) 10.2 81.4 

L40 with maximum hook reach of Capacities 81.4 ft(lb) 

Reeving 


at 30˚ 

SM 4,850 4,850 

Chart Hook Reach SM 12 (ft) 10.2 4,850 81.4 4,850 

DM 



Capacities 

81.4 ft 

(lb) 

at 30˚ 

SM 4,850 4,850 


11 (ft) 10.2 81.4 

Jib Configuration: Reeving L40 with maximum hook reach of Capacities 81.4 ft (lb) at 30˚ 

THIS CHART IS ONLY A GUIDE AND Chart SHOULD SM 12NOT BE 4,850 USED TO 4,850OPERATE THE CRANE. The individual crane’s load chart, 

operating instructions and other instructional Hook Reach 

Jib Configuration: plates DM (ft) must 10.2 

L35 be read 81.4 

with maximum and understood hook reach prior of to 81.4 operating ft 30˚ the crane. 

Reeving 


Hook Reach SM (ft) 10.2 4,850 81.4 4,850 

Reeving DM 


SM 4,850 4,850 

Chart 12 

Igo T 70

10 

load charts 

Reeving 


Hook Reach SM (ft) 10.2 4,850 86.9 4,850 4,542 4,145 3,748 

Reeving DM 


SM 4,850 4,850 

DM 

Chart 9 


Chart 10 


Hook Reach (ft) 10.2 86.9 

Reeving 


Reeving DM 

SM 4,850 4,850 

DM 

Chart 10 



Chart 11 


Reeving 


Reeving DM 

SM 4,850 4,850 

DM 

Chart 11 




Reeving 


Reeving DM 

SM 4,850 4,850 

DM 

Chart 12 



Chart 12 







Reeving 


SM 4,850 4,850 

DM 

Jib Configurations 

L40 (131 ft / 40 m) = standard jib with jib extension (16.4 ft / 5 m) 


L30.5 (100 ft / 30.5 m) = standard jib 

L28.5 (92 ft / 28.5 m) = standard jib with nose removed 

Reeving Abbreviations 

SM = 2-part line configuration with section of hookblock stowed at jib 

DM = 4-part line configuration 

Igo T 70 



metric dimensions 

11 



Igo T 70

metric crane profile 

12 

*There are two possible profiles for the Igo T 70 that are beneficial for erecting and dismantling on congested job sites. 

Igo T 70 



metric load charts 

Chart 1m 

Jib Configuration: L40 with maximum hook reach of 40.0 m at 0˚ 

Hook Reach (m) 3.1 16 18 20 22 24 26 26.2 28 30 32 34 36 38 40 

Reeving 

Capacities (kg) 

SM 

2,220 2,220 2,220 2,220 2,220 2,220 2,220 2,220 2,030 1,860 1,720 1,600 1,490 1,390 1,300 

DM 

4,000 4,000 3,470 3,060 2,720 2,450 2,220 2,220 2,030 1,860 1,720 1,600 1,490 1,390 1,300 

Chart 2m 

Chart 1m 


Jib Configuration: Hook L35Reach with (m) maximum 3.1 hook 16 reach of18 35.0 m20 at 0˚ 22 24 26 26.2 28 30 32 34 36 38 40 

Reeving 


Hook Reach (m) 3.1 SM 17.3 2,220 18 2,220 20 2,220 22 2,220 24 2,220 26 2,220 28 28.4 2,220 2,220 30 2,030 32 1,860 34 1,720 35 1,600 1,490 1,390 1,300 

Reeving 

Chart 1m 

DM 

4,000 4,000 3,470 3,060Capacities 2,720(kg) 

2,450 2,220 2,220 2,030 1,860 1,720 1,600 1,490 1,390 1,300 

SM 

2,200 2,200 2,200Jib 2,200 Configuration: 2,200 L40 2,200with2,200 maximum 2,200 hook2,200 reach of 2,050 40.0 m1,900 at 0˚ 1,760 1,700 

DM Chart 4,0002m4,000 3,800 3,350 2,990 2,690 2,440 2,230 2,200 2,050 1,900 1,760 1,700 

Hook Reach (m) 3.1 16 18 20 22 24 26 26.2 28 30 32 34 36 


Chart 3m 

Reeving hook reach of 35.0 m at 0˚ 


Jib Configuration: Hook L30.5 Reach with (m) maximum 3.1 Chart hook 17.3 

SM 

reach 1m18 2,220 

of 30.5 20 

2,220 

m at 0˚ 22 

2,220 

24 

2,220 

26 

2,220 

28 28.4 

2,220 2,220 

30 

2,220 

32 

2,030 

34 

1,860 

35 

1,720 1,600 1,4 

Reeving 

DM 

4,000 4,000 3,470 

Jib Configuration: L40 with maximum hook Capacities 3,060 

reach (kg) 2,720 2,450 2,220 2,220 2,030 1,860 1,720 1,600 1,4 

of 40.0 m at 0˚ 

Hook Reach (m) 3.1 SM 18.5 2,200 20 2,200 22 2,200 24 2,200 26 2,200 28 2,200 30 30.5 2,200 2,200 2,200 2,050 1,900 1,760 1,700 

Reeving 

Chart Hook Reach 2m 

DM 

4,000 4,000 Capacities 3,800 (m) 3,350 (kg) 3.1 2,990 16 2,690 18 2,440 20 2,230 22 2,200 24 2,050 26 1,900 26.2 1,760 28 1,700 30 32 34 36 

SM 

2,200 2,200 2,200Jib 2,200 Configuration: Reeving2,200 L35 2,200with2,200 maximum 2,200 hook2,200 

reach of 35.0 m at 0˚ Capacities (kg) 

DM Chart 4,0003m4,000 3,650 3,250SM 

2,930 2,670 2,220 2,440 2,220 2,240 2,220 2,200 2,220 2,220 2,220 2,220 2,220 2,030 1,860 1,720 1,600 1,4 


DM 1m(m) 3.1 4,000 17.3 4,000 3,470 18 3,060 20 2,720 22 2,450 24 2,220 26 2,220 28 28.4 2,030 1,860 30 1,720 32 1,600 34 1,4 35 


Chart 4m 

Reeving maximum hook reach of 30.5 m at 0˚ 



Jib Configuration: Hook L28.5 Reach with (m) maximum 3.1 Chart hook 18.5 

SM 

reach 2m20 2,200 

of 28.5 22 

2,200 

m at 0˚ 24 

2,200 

26 

2,200 

28 

2,200 

30 30.5 

2,200 2,200 2,200 2,200 2,050 1,900 1,760 1,7 

Hook Reach 

Reeving 

DM (m) 4,000 3.1 

Jib Configuration: L35 withCapacities 4,000 16 

maximum (kg) 3,800 18 3,350 20 2,990 22 2,690 24 2,440 26 26.2 2,230 2,200 28 2,050 30 1,900 32 1,760 34 1,7 36 

hook reach of 35.0 m at 0˚ 

Hook Reach (m) 3.1 19.2 20 22Reeving 

24 26 28 28.5 


SM 

2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 

Reeving 

Chart Hook Reach SM 3mCapacities (m) (kg) 2,220 3.1 17.3 2,220 2,220 18 2,220 20 2,220 22 2,220 24 2,220 26 2,220 28 28.4 2,030 1,860 30 1,720 32 1,600 34 1,4 

DM 

4,000 4,000 3,650 3,250 2,930 2,670 2,440 2,240 2,200 

35 

SM 

2,200 2,200 2,200Jib 2,200 Configuration: Reeving DM 2,200 L30.5 2,200 4,000 with 2,200 4,000 maximum 2,200 3,470 hook 3,060 reach2,720 of 30.5 2,450 m at Capacities 0˚ 2,220(kg) 

2,220 2,030 1,860 1,720 1,600 1,4 

DM Chart 4,0004m4,000 3,810 3,400SM 

3,070 2,790 2,200 2,550 2,200 2,500 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,050 1,900 1,760 1,7 


DM 2m(m) 3.1 4,000 18.5 4,000 3,800 20 3,350 22 2,990 24 2,690 26 2,440 28 2,230 30.5 2,200 2,050 1,900 1,760 1,7 


Chart 5m 

Reeving maximum hook reach of 28.5 m at 0˚ Capacities (kg) 


Jib Configuration: Hook L40Reach with (m) maximum 3.1 hook Chart 19.2 

SM 

reach 3mof20 2,200 

28.5 m22 2,200 

at 0˚ 24 

2,200 

26 

2,200 

28 28.5 

2,200 2,200 2,200 2,200 2,200 

Hook Reach 

Reeving 

DM (m) 4,000 3.1 

Jib Configuration: L30.5 with Capacities 

17.3 4,000 

maximum (kg) 3,650 18 3,250 20 2,930 22 2,670 24 2,440 26 2,240 28 28.4 2,200 30 32 34 35 


Hook Reach (m) 3.1 SM 16.7 2,200 18 2,200 20Reeving 

22 24 26 27.4 28 28.5 


2,200 2,200 2,200 2,200 2,200 2,200 

Reeving 

Chart Hook Reach SM 4m 

4,000 4,000 Capacities 3,810 (m) 3,400 (kg) 2,200 3.1 3,070 18.5 2,200 

2,790 

2,200 20 2,550 

2,200 22 2,500 

2,200 24 2,200 26 2,200 28 2,200 

DM 

30 30.5 2,200 2,050 1,900 1,760 1,7 

SM 

2,200 2,200 2,200Jib 2,200 Configuration: Reeving DM 2,200 L28.5 2,200 4,000 with 2,200 4,000 maximum 2,200 3,800 hook 2,150 3,350 reachCapacities 2,100 2,990 of 28.5 2,690 (kg) m at 0˚ 2,440 2,230 2,200 2,050 1,900 1,760 1,7 

DM Chart 4,0005m4,000 3,660 3,220SM 

2,870 2,590 2,200 2,350 2,200 2,200 2,150 2,200 2,100 2,200 2,200 2,200 2,200 2,200 


DM 3m(m) 3.1 4,000 19.2 4,000 3,650 20 3,250 22 2,930 24 2,670 26 2,440 28 28.5 2,240 2,200 


Chart 6m 

Reeving 


Jib Configuration: L30.5 with maximum hook reach of 30.5 m at 0˚ 

Jib Configuration: Hook L35Reach with (m) maximum 3.1 hook Chart 16.7 

SM 

reach 4m 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 

of18 28.5 m20 at 0˚ 22 24 26 27.4 28 28.5 

Hook Reach 

Reeving 

DM (m) 4,000 3.1 

Jib Configuration: L28.5 with Capacities 

18.5 4,000 

maximum (kg) 3,810 20 3,400 22 3,070 24 2,790 26 2,550 28 2,500 30 30.5 


Hook Reach (m) 3.1 SM 16.7 2,200 18 2,200 20Reeving 

2,200 22 2,200 24 2,200 26 27.4 2,200 2,200 28 28.5 


2,200 2,150 2,100 

Reeving 

Chart 

DM 

4,000 Hook 4,000Reach SM 5mCapacities 3,660 (m) 3,220 (kg) 2,200 3.1 2,870 19.2 2,200 

2,590 

2,200 20 2,350 

2,200 22 2,200 

2,200 24 2,150 

2,200 26 2,100 

2,200 28 28.5 2,200 2,200 

SM 

2,200 2,200 2,200Jib 2,200 Configuration: Reeving DM 2,200 L40 2,200 4,000with2,200 maximum 2,200 3,650 hook2,150 3,250 reach of Capacities 2,100 2,930 28.5 m2,670 (kg) at 0˚ 2,440 2,240 2,200 

DM Chart 4,0006m4,000 3,660 3,220SM 

2,870 2,590 2,200 2,350 2,200 2,150 2,200 2,100 2,200 2,200 2,200 2,200 


DM 4m(m) 3.1 4,000 16.7 4,000 3,810 18 3,400 20 3,070 22 2,790 24 2,550 26 27.4 2,500 28 28.5 

Jib Configuration: L35 with maximum Reeving hook reach of 28.5 m at 0˚ 



Hook Reach (m) 3.1 Chart 16.7 

SM 5m18 2,200 

20 

2,200 

22 

2,200 

24 

2,200 

26 27.4 

2,200 2,200 

28 28.5 

2,200 2,200 2,150 2,100 

Hook Reach 

Reeving 

DM (m) 4,000 3.1 

Jib Configuration: L40 withCapacities 19.2 4,000 

maximum (kg) 3,660 20 3,220 2,870 24 2,590 26 2,350 28 28.5 2,200 2,150 2,100 


Reeving 


SM 

2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,150 2,100 

Chart 

DM 

4,000 Hook 4,000Reach SM 6m3,660 (m) 2,200 

3,220 3.1 2,870 16.7 2,200 2,200 

2,590 18 2,200 

2,350 20 2,200 

2,200 22 2,200 

2,150 24 2,200 

2,100 26 27.4 2,200 28 28.5 

Jib Configuration: Reeving DM L35 4,000with 4,000 maximum 3,810 hook3,400 reach of Capacities 3,070 28.5 m2,790 (kg) at 0˚ 2,550 2,500 

SM 

2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,150 2,100 


DM 5m(m) 3.1 4,000 16.7 4,000 3,660 18 3,220 20 2,870 22 2,590 24 2,350 26 27.4 2,200 2,150 28 28.5 2,100 

Reeving 



ChartSM 

6m 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,150 2,100 

Hook Reach DM (m) 4,000 3.1 16.7 4,000 3,660 18 3,220 20 2,870 22 2,590 24 2,350 26 27.4 2,200 2,150 28 28.5 2,100 


Reeving 


Hook Reach SM (m) 2,200 3.1 16.7 2,200 2,200 18 2,200 20 2,200 22 2,200 24 2,200 26 27.4 2,200 2,150 28 28.5 2,100 

Reeving DM 

4,000 4,000 3,660 3,220 Capacities 2,870 2,590 (kg) 2,350 2,200 2,150 2,100 

SM 

2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,150 2,100 

ChartDM 

6m 4,000 4,000 3,660 3,220 2,870 2,590 2,350 2,200 2,150 2,100 



operating instructions and other instructional Hookplates Reach (m) must be 3.1 read 16.7 and understood 18 20prior to 22operating 24 the crane. 26 27.4 28 28.5 

Reeving 


SM 

2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,150 2,100 

DM 

4,000 4,000 3,660 3,220 2,870 2,590 2,350 2,200 2,150 2,100 

13 

Igo T 70

14 

Chart 5m 


Hook Reach (m) 3.1 19.2 20 22 24 26 28 28.5 

Reeving 


SM 

2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 

DM 

4,000 4,000 3,810 3,400 3,070 2,790 2,550 2,500 


Hook Reach (m) 3.1 16.7 18 20 22 24 26 27.4 28 28.5 

Reeving 


SM 

2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,150 2,100 

DM 

4,000 4,000 3,660 3,220 2,870 2,590 2,350 2,200 2,150 2,100 

Chart 6m 


Hook Reach (m) 3.1 16.7 18 20 22 24 26 27.4 28 28.5 

Reeving 


SM 

2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,200 2,150 2,100 

DM 

4,000 4,000 3,660 3,220 2,870 2,590 2,350 2,200 2,150 2,100 

Igo T 70 

Chart 7m 


Hook Reach (m) 3.1 22.9 25 28 31 34.8 

Reeving 


SM 2,200 2,200 1,970 1,710 1,510 1,300 

DM 

Chart 7m 


Chart 8m 

Hook Reach (m) 3.1 22.9 25 28 31 34.8 


Reeving 

L35 with maximum hook reach of Capacities 30.4 m(kg) 

at 30˚ 

Chart Hook Reach SM 7m(m) 3.1 2,200 24.7 2,200 1,970 26 1,710 28 30.4 1,510 1,300 

Jib Configuration: Reeving DM L40 with maximum hook reach of Capacities 34.8 m(kg) 

at 30˚ 

SM 2,200 2,200 2,060 1,880 1,700 

Chart Hook Reach 8m (m) 3.1 22.9 25 28 31 34.8 

DM 


Reeving 


Capacities 

30.4 m(kg) 

at 30˚ 

SM 9m 2,200 2,200 1,970 1,710 1,510 1,300 


7m (m) 3.1 24.7 26 28 30.4 


L30.5 L40 with withmaximum maximumhook hookreach reachof Capacities of 34.8 26.5m (kg) mat at 30˚ 30˚ 

Chart Hook Reach SM 8m(m) 3.1 2,200 26.5 2,200 2,060 1,880 1,700 

Hook Reach (m) 3.1 22.9 25 28 31 34.8 


Capacities Reeving 

L35 with maximum hook reach of Capacities 30.4 m(kg) 

at 30˚ 

SM 2,200 2,200 

Chart Hook Reach SM 9m (m) 2,200 3.1 24.7 2,200 1,970 26 1,710 28 30.4 1,510 1,300 

DM 


Reeving DM 

L30.5 with maximum hook reachCapacities of 26.5(kg) 

m at 30˚ 

SM 10m 2,200 2,200 2,060 1,880 1,700 


8m (m) 3.1 26.5 


L28.5 L35 with withmaximum maximumhook hookreach reachof Capacities of 30.4 24.8m (kg) mat at 30˚ 30˚ 

Chart Hook Reach SM 9m(m) 3.1 2,200 24.8 2,200 

Hook Reach (m) 3.1 24.7 26 28 30.4 


Reeving 


m at 30˚ 

SM 2,200 2,200 

Chart Hook Reach SM 10m(m) 2,200 3.1 26.5 2,200 2,060 1,880 1,700 

DM 


Reeving DM 


m at 30˚ 

SM 11m 2,200 2,200 


9m (m) 3.1 24.8 


L40 L30.5 with with maximum maximumhook hook reach reach of Capacities of 24.8 26.5 m(kg) 

matat 30˚ 30˚ 


Hook Reach (m) 3.1 26.5 


Reeving 


m at 30˚ 

SM 2,200 2,200 

Chart Hook Reach SM 11m(m) 2,200 3.1 24.8 2,200 

DM 


Reeving DM 


Capacities 

24.8 m(kg) 

at 30˚ 

SM 12m 2,200 2,200 


10m(m) 3.1 24.8 


L35 L28.5 with with maximum maximumhook hook reach reach of Capacities of 24.8 24.8 m(kg) 

matat 30˚ 30˚ 



Jib Configuration: Reeving DM L40 with maximum hook reach of Capacities 24.8 m(kg) 

Reeving 

Capacities (kg) at 30˚ 

SM 2,200 2,200 

Chart Hook Reach SM 

DM 

12m(m) 2,200 3.1 24.8 2,200 


Reeving DM 


Capacities 

24.8 m(kg) 

at 30˚ 

SM 2,200 2,200 


11m(m) 3.1 24.8 

Jib Configuration: Reeving L40 with maximum hook reach of Capacities 24.8 m(kg) 

at 30˚ 

THIS CHART IS ONLY A GUIDE AND Chart SHOULD SM 12m NOT BE 2,200 USED TO 2,200OPERATE THE CRANE. The individual crane’s load chart, 

Hook Reach 

operating instructions and other instructional Jib Configuration: plates DM 

(m) 3.1 24.8 

must L35 be read with maximum and understood hook reach prior of to 24.8 operating m 30˚ the crane. 

Reeving 


Hook Reach SM (m) 2,200 3.1 24.8 2,200 

Reeving DM 


SM 2,200 2,200 

ChartDM 

12m

Reeving 


Hook Reach SM (m) 2,200 3.1 26.5 2,200 2,060 1,880 1,700 

Reeving DM 


SM 2,200 2,200 

DM 

Chart 9m 



Chart 10m 



Reeving 

Hook Reach SM (m) 2,200 3.1 24.8 2,200 

Reeving DM 

SM 2,200 2,200 

DM 

Chart 10m 



Chart 11m 


Reeving 

Hook Reach SM (m) 2,200 3.1 24.8 2,200 

Reeving DM 

SM 2,200 2,200 

DM 

Chart 11m 




Reeving 

Hook Reach SM (m) 2,200 3.1 24.8 2,200 

Reeving DM 

SM 2,200 2,200 

DM 

Chart 12m 



Chart 12m 







Reeving 


SM 2,200 2,200 

DM 

15 

Jib Configurations 



L30.5 (100 ft / 30.5 m) = standard jib 

L28.5 (92 ft / 28.5 m) = standard jib with nose removed 

Reeving Abbreviations 

SM = 2-part line configuration with section of hookblock stowed at jib 

DM = 4-part line configuration 



Igo T 70

mechanical data 

16 

Warning Systems 

Limit Moment Cut-Out – Prevents a moment that is more than +10%. 

Igo T 70 

Warning 

1. The operator must read and understand the owner’s manual before operating this crane. 

2. Positioning or operation of crane beyond areas shown is not intended or approved except where specified in 

owner’s manual. 

3. Practical working loads depend on supporting surface, wind, and other factors affecting stability such as 

hazardous surroundings, experience of personnel, and proper handling, all of which must be taken into account 

by the operator. 



symbols glossary 

Anemometer 

Hoist 

Outrigger 

Traveling 

17 

Ballast 

Hoisting 

Mechanism 

Reeving 

Traversing 

Trolley 

Ballasting 

Derrick 

Hydraulic 


Reeving 

2-Part 

Traversing Trolley 

& Load Diagrams 

Chassis 

Jib 

Reeving 

4-Part 

Trolley 

Controls 

Jib 

Extension 

Swing 

Wireless 

Control 

Electrical 

Requirement 

Mast 

Transport Axle 

Igo T 70

notes 

18 

Igo T 70

notes 

19 

Igo T 70

Regional Headquarters 

Americas 

Manitowoc, Wisconsin, USA 

Tel: +1 920 684 6621 

Fax: +1 920 683 6278 

Shady Grove, Pennsylvania, USA 

Tel: +1 717 597 8121 

Fax: +1 717 597 4062 

Europe, Middle East, Africa 

Ecully, France 

Tel: +33 472 18 2020 

Fax: +33 472 18 2000 

Asia – Pacific 

Shanghai, China 

Tel: +86 21 51113579 

Fax: +86 21 51113578 

Singapore 

Tel: +65 6264 1188 

Fax: +65 6862 4142 

Regional Offices 

Americas 

Brazil 

Alphaville 

Tel: +55 11 3103 0200 

Fax: +55 11 4688 2013 

Mexico 

Monterrey 

Tel: +52 81 8124 0128 

Fax: +52 81 8124 0129 

Europe, Middle East, Africa 

Algeria 

Hydra 

Tel: +21 3 21 48 1173 

Fax: +21 3 21 48 1454 

Czech Republic 

Netvorice 

Tel: +420 317 78 9313 

Fax: +420 317 78 9314 

France 

Baudemont 

Tel: +33 385 28 2589 

Fax: +33 385 28 0430 

Cergy 

Tel: +33 130 31 3150 

Fax: +33 130 38 6085 

Decines 

Tel: +33 472 81 5000 

Fax: +33 472 81 5010 

Germany 

Langenfeld 

Tel: +49 21 73 8909-0 

Fax: +49 21 73 8909 30 

Hungary 

Budapest 

Tel: +36 13 39 8622 

Fax: +36 13 39 8622 

Italy 

Parabiago 

Tel: +390 331 49 3311 

Fax: +390 331 49 3330 

Netherlands 

Breda 

Tel: +31 76 578 3999 

Fax: +31 76 578 3978 

Poland 

Warsaw 

Tel: +48 22 843 3824 

Fax: +48 22 843 3471 

Portugal 

Alfena 

Tel: +351 229 69 8840 

Fax: +351 229 69 8848 

Lisbon 

Tel: +351 212 109 340 

Fax: +351 212 109 349 

Russia 

Moscow 

Tel: +7 495 641 2359 

Fax: +7 495 641 2358 

U.A.E. 

Dubai 

Tel: +971 4 3381 861 

Fax: +971 4 3382 343 

U. K. 

Middlesex 

Tel: +44 1 895 43 0053 

Fax: +44 1 895 45 9500 

Sunderland 

Tel: +44 191 522 2000 

Fax: +44 191 522 2052 

Asia – Pacific 

Australia 

Melbourne 

Tel: +61 3 9 336 1300 

Fax: +61 3 9 336 1322 

Sydney 

Tel: +61 2 9 896 4433 

Fax: +61 2 9 896 3122 

China 

Beijing 

Tel: +86 10 58674761 

Fax: +86 10 58674760 

Xi’an 

Tel: +86 29 87891465 

Fax: +86 29 87884504 

Korea 

Seoul 

Tel: +82 2 3439 0400 

Fax: +82 2 3439 0405 

Philippines 

Makati City 

Tel: +63 2 844 9437 

Fax: +63 2 844 4712 

Factories 

Brazil 

Alphaville 

China 

Zhangjiagang 

France 

Charlieu 

La Clayette 

Moulins 

Germany 

Wilhelmshaven 

India 

Calcutta 

Pune 

Italy 

Niella Tanaro 

Portugal 

Baltar 

Fânzeres 

Slovakia 

Saris 

U.S.A. 

Manitowoc 

Port Washington 

Shady Grove 

Constant improvement and engineering progress 

make it necessary that we reserve the right to make 

specification, equipment and price changes without 

notice. Illustrations shown may include optional 

equipment and accessories, and may not include all 

standard equipment. 

www.manitowoccranegroup.com 

©2007 MANITOWOC 

Printed in USA 

Form No. IGO T 70 

Part No. 07-013 / 1007 / 1.5M

igo t 70.pdf - Compass Equipment

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?