KOSTER Waterproofing Systems
KOSTER Waterproofing Systems
KOSTER Waterproofing Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Waterproofing</strong><br />
<strong>KOSTER</strong> NB 1 Grey: Crystalline waterproofing coating.<br />
<strong>KOSTER</strong> NB Elastic Grey/White: Two component<br />
elastomeric cementitious waterproof coating<br />
CONTACT<br />
DETAILS<br />
Efficient and Effective<br />
<strong>Waterproofing</strong> <strong>Systems</strong><br />
<strong>KOSTER</strong> BDM: Crystallizing, chloride free sealing<br />
agent for the integral waterproofing of concrete<br />
elements.<br />
<strong>KOSTER</strong> KD 2 Blitz Powder: Highly reactive powder<br />
with an extremely short setting time.<br />
<strong>KOSTER</strong> KB Pur 2 IN 1 Injection: Water activated,<br />
solvent–free, polyurethane injection resin as well as a<br />
flexible solid resin for permanent crack sealing.<br />
<strong>KOSTER</strong> KB Flex 200: Permanently Elastic,<br />
<strong>Waterproofing</strong> compound for waterproofing active<br />
leaks.<br />
<strong>KOSTER</strong> American Corporation<br />
2585 Aviator Drive, Virginia Beach, VA 23453<br />
Phone: 757-425-1206 Fax: 757-425-9951<br />
info@kosterusa.com, www.kosterusa.com<br />
<strong>KOSTER</strong> KBE Liquid Film: Solvent-free, highly elastic<br />
bitumen / rubber based sealing compound.
Crack Injection<br />
Concrete Repair<br />
Repair Mortar: Concrete repair and waterrepellent<br />
finishing mortar.<br />
Wet Room <strong>Waterproofing</strong><br />
Repair Mortar Plus: Fast setting, expanding<br />
repair mortar.<br />
Cracks in the building substance are structurally<br />
weak points. Additionally, penetrating water<br />
may cause damage and may reduce the usage<br />
and lifetime of the building. An elastic sealing<br />
or structural-bonding of the crack is required. In<br />
order to achieve this, the crack is filled over its<br />
entire course with a polyurethane injection resin<br />
via pressure injection. The injection resins which<br />
are applied can also be used in drinking water<br />
environments.<br />
Typical areas of crack repair:<br />
-basements -tunnels -façades<br />
-construction joints -parking decks -bridges<br />
-concrete floors<br />
-wall/floor joints<br />
Crack injection by pressure injection in<br />
leaking cracks:<br />
<strong>KOSTER</strong> Repair Mortar NC: Fiber reinforced<br />
repair, concrete replacement and finishing mortar<br />
with high chemical and mechanical resilience.<br />
<strong>KOSTER</strong> Sewer and Shaft Mortar: Chemically<br />
resistant, fast curing restoration mortar for sewers<br />
and shafts.<br />
<strong>KOSTER</strong> Betomor Multi A: Repair, leveling and<br />
corrosion protection mortar for rapid repairs of<br />
concrete and masonry.<br />
<strong>KOSTER</strong> BD 50: Solvent-Free elastic waterproofing<br />
for use under tile.<br />
<strong>KOSTER</strong> BD 50 Primer: Solvent-free elastic<br />
waterproofing for use under tile.<br />
<strong>KOSTER</strong> BD Flex Tape K 120: Flexible joint sealing<br />
tape.<br />
<strong>KOSTER</strong> BD Wall Sleeve: Elastic formed material for<br />
waterproofing pipe penetrations in combination<br />
with waterproofing systems under tile.<br />
<strong>KOSTER</strong> BD Floor Sleeve: Elastic formed material<br />
for waterproofing floor drains in combination with<br />
waterproofing systems under tile.<br />
Advantages of the <strong>KOSTER</strong> BD System<br />
- fully waterproof<br />
- easy to connect or to make repairs<br />
<strong>KOSTER</strong> Betomor C-Coat: Filling and leveling<br />
mortar as well as shrinkage or blow-hole<br />
filler for concrete surfaces.<br />
- flexible, crack bridging system<br />
-waterproofing of joints and<br />
pipe penetrations<br />
- easy to apply<br />
- perfect surface for tiling with standard<br />
tile adhesives<br />
- compatibility with under floor heating<br />
- excellent bond to the substrate<br />
- not flammable<br />
- odor free<br />
- resistant to physical and chemical<br />
stresses (hydrolysis, alkalis, chemicals)<br />
- scratch resistant