Solutions for Construction Testing - Tinius Olsen

CONCRETE
both in the field and in the laboratory.
The capping set comprises a base with
an upright, which serves as a guide for
positioning the capping plate and a
cylinder. The capping plate is machined
to keep molten compound precise, and
to position the cylinder. The set is
supplied complete with cylinder carrier
and ladle.
Applicable Standards
EN 12390-3, ASTM C 617, AASHTO
T-231
Ordering Information
TO 357 Capping Set, Vertical, for
Capping 150 mm diameter Cylinders and
Cores
TO 358 Capping Set, Vertical, for
Capping 100 mm diameter Cylinders and
Cores
Optional Extras
TO 359 Mould for capping 150 mm
diameter concrete cylinders as per USBR
recommendations
TO 35701 Capping compound, pack of
5 kg, for capping ends of concrete test
cylinders
TO 35702 Warmer for melting capping
compound. Consists of an electrically
heated bath with a temperature
regulator, complete with a cover and
carrying handle. (220 V, 50 Hz, 1 ph AC
supply)
TO 35703 Bowl — metallic bowl for
holding the molten capping compound
TO 35704 Ladle — metallic ladle for
pouring molten capping compound into
grooves between cylinder and capping
plate
Cylindrical Specimen Caps
And Rubber Pads
System Description
An alternative Tinius Olsen’s capping
equipment is our steel caps and rubber
pads; these are quicker and simpler to
setup and use.
Ordering Information
TO-320-5519 Cylindrical specimen 6 inch
cap
TO-320-5520 Rubber insert for 6 inch cap
TO-320-5524 Cylindrical specimen 4 inch
cap
TO-320-5525 Rubber insert for 4 inch cap
www.TestingConcrete.com
31
Contact us at: sales@TiniusOlsen.com