Quick programming guide M15.pdf - Frank Mobility Systems

Programming the e.motion M15 with the “ECS”
Please ensure that the battery packs are installed in emotion wheels in order to
access the program setup and turn ON the e.motion using the ECS (press either (1)
or (2) on the remote.
OVERVIEW: (when in programming mode the functions of the ECS buttons change)
(0) = Program Confirmation Button
(1) = Decrease settings
(2) = Increase settings
(3) = DO NOT USE (Reset Button)
(4) = Scrolls between Parameters (0—9)
(5) = Program Key
(Once key is inserted, program mode is only active for 5 seconds, if this is
not enough time to decide what parameter you want to change, simply
re-insert program key and start over)
Now use the (4) button to scroll between Parameters (see next pages for explanation
of each mode)
Use (1) button to decrease or (2) button to increase settings (see next pages for
more detailed information)
(wrench symbol appears only when program key is inserted)
EXAMPLE SHOWN:
Decreasing Parameter 7 = HIGH (2) Power Level Adjustment from
100% to 80%
(wrench symbol and exclamation mark appear once changes are made;
pressing the (0) button confirms changes and only wrench symbol appears)
Remove (5) Program Key when programming is completed
RECOMMENDATION: First time programmers, change only 1 parameter at a
time to better learn about the effects of any changes made.

Parameters
Function and Settings Options:
Parameter 0 = Sensitivity of LEFT emotion Push Rim:
Adjustable from 20% (little muscle power required to move wheel) to 100% (more
muscle power required to move wheel)
• 100% (display: 5 bars — least sensitive )
• 80% (display: 4 bars )
• 60% (display: 3 bars* )
• 40% (display: 2 bars )
• 20% (display: 1 bar — most sensitive )
Parameter 1 = Sensitivity of RIGHT emotion Push Rim:
Adjustable from 20% (little muscle power required to move wheel) to 100% (more
muscle power required to move wheel)
• 100% (display: 5 bars — least sensitive )
• 80% (display: 4 bars )
• 60% (display: 3 bars* )
• 40% (display: 2 bars )
• 20% (display: 1 bar — most sensitive )
Parameter 2 = Volume of Acoustic Signal:
• Level 5 - (display: 5 bars LOUD )
• Level 4 - (display: 4 bars )
• Level 3 - (display: 3 bars* )
• Level 2 - (display: 2 bars )
• Level 1 - (display: 1 bar SOFT )
Parameter 3 = Startup Delayed Responds for LOW (1) Power Level:
• 1.2 seconds (display: 5 bars — Slowest Responds )
• 1.0 second (display: 4 bars )
• 0.75 seconds (display: 3 bars )
• 0.5 seconds (display: 2 bars * )
• 0.3 seconds (display: 1 bar — Quickest Responds )
Parameter 4 = LOW (1) Power Level Adjustment:
• 70% (display: 5 bars — High Power Setting )
• 60% (display: 4 bars )
• 50% (display: 3 bars* )
• 40% (display: 2 bars )
• 30% (display: 1 bar — Low Power Setting)

Parameters
Function and Settings Options:
Parameter 5 = Follow-up time for LOW (1) how long the motors runs:
• 1.8 seconds (display: 5 bars — Longest after run )
• 1.5 second (display: 4 bars )
• 1.2 seconds (display: 3 bars )
• 1.0 seconds (display: 2 bars * )
• 0.8 seconds (display: 1 bar — Shortest after run )
Parameter 6 = Startup Delayed Responds for HIGH (2) Power Level:
• 1.5 seconds (display: 5 bars — Slowest Responds )
• 1.3 second (display: 4 bars )
• 1.0 seconds (display: 3 bars )
• 0.7 seconds (display: 2 bars * )
• 0.5 seconds (display: 1 bar — Quickest Responds )
Parameter 7 = HIGH (2) Power Level Adjustment:
• 100% (display: 5 bars — High Power Setting )
• 90% (display: 4 bars )
• 80% (display: 3 bars )
• 70% (display: 2 bars * )
• 60% (display: 1 bar — Low Power Setting)
Parameter 8 = Follow-up time for HIGH (2) how long the motors runs:
• 4.0 seconds (display: 5 bars — Longest after run )
• 3.0 second (display: 4 bars )
• 2.5 seconds (display: 3 bars )
• 2.0 seconds (display: 2 bars * )
• 1.8 seconds (display: 1 bar — Shortest after run )
Parameter 9 = Auto Shut-Off:
• display: 5 bars — 120 minutes
• display: 4 bars — 60 minutes
• display: 3 bars* — 30 minutes
• display: 2 bars — 15 minutes
• display: 1 bars — 5 minutes