MiniElectra - Geiger Cytec Systems AG
MiniElectra - Geiger Cytec Systems AG
MiniElectra - Geiger Cytec Systems AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MiniElectra</strong><br />
MAIN ADVANT<strong>AG</strong>ES<br />
<strong>Geiger</strong> <strong>Cytec</strong> <strong>Systems</strong> <strong>AG</strong><br />
Steinhaus 155<br />
CH-3150 Schwarzenburg<br />
• X- and Y-axes motorized, on linear guides –<br />
freely programmable<br />
T: 0041 (0) 31 734 24 24<br />
F: 0041 (0) 31 734 24 25<br />
www.geigercytec.com<br />
• Short removal times –<br />
rapid release of the machine thanks to the waiting position<br />
• Energy-saving –<br />
insignificant consumption of compressed air<br />
• Program memory –<br />
on chip PCB for the respective mold<br />
TECHNICAL SPEZIFICATIONS<br />
• X- and Y-axes motorized<br />
• Waiting position by means of the mold<br />
• Intermediate stop Z-axis<br />
• Precision of repetition: X-/Y-axis +/- 0.2mm<br />
• Max. weight of part and gripper: 300g<br />
• Mains supply voltage: 230/115V (50/60Hz)<br />
• Connected rating: 80 VA<br />
• Compressed air supply: 4 bar,<br />
Consumption approx. 4 NL/cycle (without vacuum)<br />
• Y-axis tilting 10°<br />
• Metallic gripper (gripper F)<br />
• Deposit behind injection molding machine<br />
STANDARD VERSION<br />
• Control SPS 18/18, freely programmable<br />
• Control module external (Easy Terminal II)<br />
• 18 inputs – 18 outputs<br />
• Euromap 67 Interface<br />
• Display with 8 lines<br />
OPTIONS<br />
• Additional pneumatic and vacuum circuits<br />
• Gripper of synthetic material (gripper K)<br />
• Shifting consoles<br />
• Special grippers and removal systems<br />
• Other components upon request<br />
• Euromap 12 interface<br />
• Deposit in front of the injection molding machine<br />
• Protection housing
AXIS<br />
<strong>Geiger</strong> <strong>Cytec</strong> <strong>Systems</strong> <strong>AG</strong><br />
Steinhaus 155<br />
CH-3150 Schwarzenburg<br />
Axis Designation Stroke (mm) Basic mechanical setting<br />
X Removal stroke 190 mm<br />
Drive unit electric,<br />
freely programmable<br />
Y/Z Vertical stroke/Z-axis 700 mm (500mm, 350mm)<br />
Drive unit electric,<br />
freely programmable<br />
A Axis of rotation 2x 105°<br />
0-30° behind / in front of<br />
injection molding machine<br />
MEASURING CYCLE<br />
Intervention time with<br />
waiting position<br />
0.6 sec<br />
Total cycle time 4 sec<br />
Dry run time with: Load 300 g<br />
DIMENSIONS<br />
Y-350 =<br />
110<br />
Y-500 =<br />
Y-700 = 1050<br />
min. 210<br />
150<br />
max. 360<br />
10°<br />
15<br />
116.5<br />
min. 260<br />
max. 450<br />
490<br />
65<br />
85<br />
180<br />
400<br />
Y-350 = min.<br />
Y-500 = min.<br />
Y-700 = min. 990, max. 1140<br />
Z=400<br />
Y=400<br />
X=20<br />
A=80°<br />
All specifications and illustrations are without obligation and subject to changes without prior notice<br />
105°<br />
310<br />
100<br />
120<br />
310<br />
T: 0041 (0) 31 734 24 24<br />
F: 0041 (0) 31 734 24 25<br />
www.geigercytec.com
Change language