COMFORT IN DETAILS

ALEXIKA > TENTS > SCHEME OF ASSEMBLING THE TENT WITH OUTER POLES
SCHEME OF ASSEMBLING THE TENT WITH OUTER POLES
11
Spread the flysheet, close all the zippers.
1
Then push the pole into the sleeve of the tent
and fix the pole in the guy strap of the tent.
Depending on the construction, the pole ends
with a «mushroom», which is inserted into
the eyelet of the strap on the tent, or into the
hollow tube. A dowel on the guy strap of the
tent is inserted into this tube.
1. Insert the poles and fix them from one
side. Pull the flysheet over the poles.
Pull the flysheet over the poles, fix the other
end of the pole on the other end of the tent.
Hang the inner tent, starting with the far part
of the tent, from the far corner upwards.
SCHEME OF ASSEMBLING THE “SEMI-BARREL” TENT
2. Fix the tent from one of the sides. Stretch the tent
full-length.
Close all the zippers, stretch the tent along the perimeter.
Bright ropes, so that the tent doesn’t become a
«trap».
• We reinforced the mudflap, but be careful when
loading it with stones.
• If you add extra earth around the tent, it helps to
keep the tent dry during the rain.
5
3. Fix the tent from the other side. Hang the
inner tent, close the zippers and use the
guys for stretching the tent.
ALEXIKA SPORT GROUP // WWW.ALEXIKA.EU
The loops for stretching the mudflap are not
recommended to be used for fixing the tent.
Except when it rains heavily, the
ventilation windows should always
be open.
2
4
Then push the pole into the sleeve of the tent and fix the pole in the guy strap of the tent.
3
When disassembling the tent, push the
poles through the sleeves, do not pull
them out. Otherwise the parts of the
poles disconnect and become blocked in
the sleeve.
The main loops fix the tent.
Fast-fixing of the
mudflap.