PINE-V35 - MRO-TEK
PINE-V35 - MRO-TEK
PINE-V35 - MRO-TEK
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PINE</strong>-<strong>V35</strong><br />
V.35 to E1 Interface Converter<br />
<strong>PINE</strong>-<strong>V35</strong><br />
<strong>PINE</strong>-<strong>V35</strong> is an Interface Converter that can convert Rate or Interface for E1 and fractional E1 services. It provides a<br />
serial V.35 n x 64k data user interface and E1 balanced network interface.<br />
Key Features<br />
Provides one DCE V.35 synchronous data interface<br />
conforming to ITU standards<br />
Provides one E1 interface compyling with ITU-T G.703.<br />
ITU-T G.704 frame format supported<br />
Provides local and remote alarm indication of E1 link<br />
Provides local and remote loop-back function<br />
Support both E1 framed format and unframed format, timeslots<br />
can be distributed random in fractional mode<br />
Provides three kinds of clock mode: Internal clock, External<br />
clock and Receive clock<br />
The remote device can detect the local device automatically<br />
to synchronize time slot configuration when the devices are<br />
used in pairs in fractional mode<br />
Built-in Bit Error Rate Tester<br />
Provides fault propagation function and the line fault can<br />
be tested from the <strong>V35</strong> interface<br />
Input power : 100~240V AC and -36~-72V DC .<br />
Power consumption: < 10W
TM<br />
Application<br />
V.35<br />
<strong>PINE</strong>-<strong>V35</strong><br />
E1 or<br />
fractional E1<br />
TDM<br />
TDM<br />
SDH/PDH<br />
SDH/PDH<br />
E1 or<br />
fractional E1<br />
<strong>PINE</strong>-<strong>V35</strong><br />
V.35<br />
Point to point application. It enables routers to utilize one E1 link transmission. The application provides two working modes:<br />
transparent E1 and fractional E1.<br />
Technical Specifications<br />
E1 Interface<br />
Bit Rate<br />
: 2048 Kbps ± 50ppm<br />
Line Code<br />
: HDB3<br />
Input Impedance : 120 ohm balanced (RJ45 interface)<br />
Electrical Characteristics : ITU-T G.703<br />
Frame Structure : ITU-T G.704<br />
Jitter Performance : ITU-T G.823<br />
<br />
<br />
V.35 Interface:<br />
Physical Characteristics<br />
Connector<br />
Working Mode<br />
Bit Rate<br />
: Compliant to V.35 interface standard<br />
: HDB26 Female interface<br />
: DCE<br />
: N*64kbps (N=1~31) at fractional E1<br />
2.048Mbps at transparent E1 mode<br />
<br />
<br />
<br />
<br />
Power supply : 100~240V AC and -36~-72V DC<br />
Power consumption : < 10W<br />
Environment of operation<br />
Operating Temperature : 0 ~ 45 deg-C<br />
Humidity : 5% ~95%<br />
Storage Temperature : -40 ~ 70 deg-C<br />
Dimensions (WxHxD)<br />
: 158 x 40 x 200 mm<br />
Ordering <strong>PINE</strong>-<strong>V35</strong><br />
<strong>PINE</strong>/E1/<strong>V35</strong>/AC/DC/CBL<br />
V.35 to transparent or fractional balanced E1 interface converter, working on 230V AC and -48V DC<br />
power supply, along with HDB26 (Male) to ISO2593 (M34) (Female) interface cable<br />
<strong>MRO</strong>-<strong>TEK</strong> Limited<br />
Bellary Road, Hebbal<br />
Bangalore - 560 024, INDIA<br />
Phone : +91-80-23332951<br />
Fax : +91-80-23333415<br />
Email : mrotek@vsnl.com<br />
Web: www.mro-tek.com<br />
Copyright <strong>MRO</strong>-<strong>TEK</strong> Limited - 2012<br />
is registered for Trade Marks with appropriate authorities.<br />
Specifications are subject to change without notice. E & OE. V12_05
Change language