Specification Sheet - Phoenix Products

LFX/LFXR Series
Explosion-proof Fluorescent
LFX 2-Lamp
The LFX/LFXR Series explosion-proof fluorescent fixtures are designed for use in virtually
any hazardous location. Typical applications for these two and four lamp explosionproof
fixtures include chemical plants, drilling rigs, refineries, and paint spray booths.
Specifications
Factory-Sealed
Fixture
No external sealing necessary
Fixture comes prelamped for fast installation
Housing
Lightweight, copper-free aluminum housing
B
A
D
Reflective Hood
Glass Tubes
Heavy gauge extruded aluminum hood
Tempered borosilicate glass tubes
C
Cast End Caps
Mounting Brackets
Threaded screw type end caps feature O-ring gaskets
Allow fixture to be mounted at any angle
Bracket included with LFX fixtures
Bracket not included with LFXR fixtures- Order separately
Type P Ballast
Thermally protected cold-weather rated ballast
LFX 4-Lamp
B
A
D
Exterior Materials
Ballast Protection
Biax Model
All exterior materials conform to non-sparking standards
Neoprene O-ring gaskets
Offers more than double the light output of standard 2-lamp 40 watt fixture
Single ballast box speeds maintenance
C
Lamp retainer and support clips secure lamps
LFXR 3-Lamp
Options
· Electronic Ballast
· Emergency Ballast (LFXR only)
· Low Temperature Ballast (No Biax)
B
LFXR 4-Lamp
B
A
A
C
C
D
D
Compliances
UL Certified to:
►UL 844 Hazardous Location
· Class I, Division 1, Groups C & D (All fixtures)
· Class I, Division 2, Groups A, B, C, & D
(2-Lamp & 4-Lamp Biaxial LFX Series; 3 & 4 Lamp LFXR Series)
· Class II, Divisions 1 & 2, Groups E, F, & G
(2-Lamp & 4-Lamp Biaxial LFX Series; 3 & 4 Lamp LFXR Series)
· Class III, Divisions 1 & 2
(2-Lamp & 4-Lamp Biaxial LFX Series; 3 & 4 Lamp LFXR Series)
(Suitable for Locations Having Deposit of Readily Combustibe Paint Residues)
►UL 1598A Marine Outside Type (Saltwater) (All fixtures)
cUL (2-Lamp & 4-Lamp Biaxial LFX Series)
CSA Certified
Dimensions
Fixture # of Lamps A B C D
LFX 2
52.0 in
(132.1cm)
46.0 in
(116.8 cm)
8.5 in
(21.6 cm)
26.0 in
(66.0 cm)
LFX 4
52.0 in
(132.1 cm)
50.0 in
(127.0 cm)
8.5 in
(21.6 cm)
11.5 in
(29.2 cm)
LFXR 3
53.0 in
(134.6 cm)
50.0 in
(127.0 cm)
11.5 in
(29.2 cm)
23.2 in
(58.9 cm)
LFXR 4
53.0 in
(134.6 cm)
48.5 in
(123.2 cm)
9.0 in
(22.9 cm)
17.0 in
(43.2 cm)
8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: 414.973.3300 • Toll Free: 800.438.1214 • Fax: 414.973.3210
www.phoenixproducts.com

LFX/LFXR Series
Explosion-proof Fluorescent
Accessories (Field installed; Order separately)
LFX Wire Lens Guard (per 2 lamps)
Specify: WG-LFX-OPR
LFXR Wire Lens Guard (per 2 lamps)
Specify: WG-R2L
Shock Mount Kit (For LFXR only)
Specify: SMK
Lamping Data (Lamps included)
LFX Series
Description Watts Part Number
F32T8/SP41 32 4220020
F40W-BIAX/SPX41 40 4220045
FT55W/2G11/41 55 4220130
F48T12/CW/HO 60 4211100
LFXR Series
Description Watts Part Number
F32T8 32 4220020
F40CW/RS/WM 34 4220049
F54/T5HO/4K 54 4211100
F48T12/CW/HO 60 4220163
Lamping/Optics Availability
Ambient Operating Temperature: 40 °C
2 Lamp LFX 4 Lamp Biax LFX 4 Lamp LFX
(Max Operating Temp. in °C)
Class I, Division 1, Groups C & D 85 (T6) 85 (T6) 85 (T3)
Class I,Division 2, Groups A, B, C, & D 160 (T3C) 160 (T3C) –
Class II, Divisions 1 & 2, Groups E, F, & G 100 (T5) 100 (T5) –
Class III, Divisions 1 & 2 100 (T5) 100 (T5) –
Simultaneous Presence C1 & C2 160 (T3C) 160 (T3C) –
LFXR 332 LFXR 340 LFXR 440
(Max Operating Temp. in °C)
Class I, Division 1, Groups C & D 85 (T6) 120 (T4A) 85 (T6)
Class II, Divisions 1, Groups E, F, & G 85 (T6) 120 (T4A) 85 (T6)
Class III 85 (T6) 120 (T4A) 85 (T6)
Simultaneous Presence C1 & C2 85 (T6) 120 (T4A) 85 (T6)
8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: 414.973.3300 • Toll Free: 800.438.1214 • Fax: 414.973.3210
www.phoenixproducts.com

Ordering Information
LFX/LFXR Series
Explosion-proof Fluorescent
Example: LFX-2-32-UNIV-ELB-AMB45
Series Lamps Watt/ Type Voltage Electrical Mounting
LFX 2 32* UNIV LTB *** AMB45
4 40BX** 347V
55BX**
60
Series
LFX – LFX Series
Watt/Type
32* – F32T8/SP41
40BX** – F40BX
55BX** – F55BX
60 – F48T12/HO
Voltage
UNIV – Universal Voltage (120-277 Volt, 50/60 Hz)
347V – 347 Volt
Electrical
LTB*** – Low Temperature Ballast
Mounting
AMB45 – 45 Degree Mounting Bracket
Notes
* Instant Start Electronic Ballast is standard
** Available in 4-lamp version only
*** Low Temperature Ballast not available with 40BX
Series Lamps Watt/ Type Voltage Electrical
LFXR 2 32 UNIV LTB
3 54 347V EMB*
4 60
Series
LFXR – LFXR Series
Watt/Type
32 – F32T8/SP41
54 – F54T5/HO
60 – F48T12//CW/HO
Voltage
UNIV – Universal Voltage (120-277 Volt, 50/60 Hz)
347V – 347 Volt
Electrical
LTB – Low Temperature Ballast
EMB* – Emergency Ballast
Notes
* Available in 2 and 4-lamp version only
Phoenix Products has taken reasonable steps to ensure that the
information contained herein is accurate. While we believe
the information is accurate, no warranty is made or implied.
Product design and specifications are subject to change without
notice. The most current version of this specification sheet can
be found on our website, www.phoenixproducts.com.
N561002E 060613
8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: 414.973.3300 • Toll Free: 800.438.1214 • Fax: 414.973.3210
www.phoenixproducts.com

LFX/LFXR Series
Explosion-proof Fluorescent
8711 West Port Avenue • Milwaukee, WI 53224 USA • Telephone: 414.973.3300 • Toll Free: 800.438.1214 • Fax: 414.973.3210
www.phoenixproducts.com