Platea - iGuzzini

design: Mario Cucinella 

Platea 

The Platea floodlight was created to meet the demand for improved 

functional and decorative lighting in urban spaces. Fixtures are available 

with different reflector configurations: asymmetric, flood, spot, super 

spot, longitudinal linear and roadway. These fixtures are made of 

die-cast aluminum with stainless steel hardware. 

A hinged front with a tempered glass lens and silicon gasket allows 

for easy access to the optical compartment for servicing the lamp. The 

technical characteristics comply with EN60598-1 standard. 

All fixtures have an IP66 rating which protects the fixtures from intrusion 

of dust and moisture from even high-pressure water jets. 

UL Listed “Suitable for wet location” 

Light pollution 

Platea superspot optical systems provide 

designers with new tools for controlling 

light pollution and spill. Beam concentration 

enables the highlighting of details and 

architectural features while minimizing 

the uncontrolled dispersal of light into the 

environment. The addition of concentric 

baffles will further reduce spill and glare. 

Superspot 5° (SS) 

150W T7.5 G12 

d L1xL2 Emax Emed 

15 ft 1.5 ft 1575 fc 930 fc 

30 ft 2.7 ft 395 fc 258 fc 

45 ft 4.05 ft 175 fc 115 fc 

60 ft 5.4 ft 98 fc 65 fc 

with 5° reflector 

Photometric files are available at: www.iguzzini-na.com/downloads 

24



Platea is manufactured to a 

class II standard of insulation. 

This ensures greater safety as it 

prevents even accidental contact 

between the live parts and the body 

of the unit. Installation and maintenance 

costs are reduced since 

there is no need to ground the unit. 

Fixture shown with hinged front 

door open for maintenance operations. 

The concentric baffle, positioned 

inside the optical assembly, eliminates 

glare. 

The system can use a wide variety of energy-saving high-efficiency light sources. 

lamp 

optic 

T4-T Gx24q-3 T6 RX7s T6 G12 T3 RSC T7.5 G12 

asymmetrical 

A 

70W 

150W 

300W 

asymmetrical 

linear 

AL 

70W 

150W 

flood 

F 

2x26W 

70W 

150W 

300W 

spot 

transversal 

linear 

longitudinal 

linear 

S 

L 

LL 

70W 

150W 

70W 

150W 

70W 

150W 

superspot 5˚ 

SS 

70W 

150W 

road lighting 

ST 

70W 

150W 

70W 

150W 

25



The Platea is especially suited for 

mounting on walls of buildings. 

The various lighting distributions 

work equally well for either up 

lighting or lighting walkways. 

When mounted and aimed down 

at 0°, the Platea is a full cut-off 

luminaire. See below for various 

distribution patterns. 

Cité du multimedia, Lemay & ass. Architect 

Flood Optic (F) – 

The best use of the flood 

optic is as external lighting 

of large spaces. 

Asymmetric Optics (A) – The 

asymmetric optical system has 

the greatest intensity at 45°. 

It projects the light forward 

without need for up tilt of the 

fixture. Glare and light pollution 

are therefore greatly reduced. This 

also reduces the amount of light 

on the mount wall, thereby 

reducing the resulting effect of 

the reflected light. 

Asymmetric Linear (AL) – 

The asymmetric linear optical 

system combines the features 

of the asymmetric optics with 

the linear spread lens. It is helpful 

when trying to achieve a more 

discrete lighting pattern on a 

walkway. 

Transversal Linear Optics (L) – 

Combines the features of the spot 

optic with the linear spread lens. 

This can be very effective 

for lighting narrow walkways 

or for façade lighting. 

150W T6 RX7s 

150W T6 RX7s 

150W T6 RX7s 

150W T7.5 G12 

h L1xL2 Emax Emed a 




9 ft 12x15 ft 63 fc 17.7 fc 15 ft 

9 ft 30x18 ft 28.5 fc 6.3 fc 18 ft 

9 ft 30x18 ft 28.6 fc 6.3 fc 18 ft 

9 ft 6x15 ft 64.0 fc 24.4 fc 16.5 ft 

15 ft 21x24 ft 22.7 fc 6.2 fc 24 ft 

15 ft 30x30 ft 10.5 fc 3.7 fc 30 ft 

15 ft 30x30 ft 8.6 fc 2.9 fc 30 ft 

15 ft 9x27 ft 25.0 fc 12.1 fc 27 ft 

30 ft 39x51 ft 5.7 fc 2.2 fc 51 ft 

30 ft 45x60 ft 2.6 fc 1.1 fc 60 ft 

30 ft 45x60 ft 2.1 fc 0.9 fc 60 ft 

30 ft 21x54 ft 6.4 fc 2.5 fc 54 ft 

45 ft 60x25 ft 2.5 fc 1.1 fc 75 ft 

45 ft 60x30 ft 1.2 fc 0.5 fc 90 ft 

45 ft 60x30 ft 1.0 fc 0.4 fc 90 ft 

45 ft 30x78 ft 2.9 fc 1.2 fc 78 ft 


26



Flood Optic (F) – 

The flood optic enables large 

spaces to be illuminated. 

The Platea floodlight is equipped 

with accessories such as a baffle 

and screen to prevent possible 

glare and dispersal of light in 

unwanted directions. 

Asymmetric Optic (A) – 

The asymmetric optic has its 

greatest luminosity at 45°. 

It projects the light flow forwards 

without any need for the unit to be 

angled: glare and light pollution are 

therefore reduced to minimum. 

Longitudinal Linear (LL) – 

The linear spread lens is oriented 

vertically to provide narrow width 

and elongated beam. This can 

be very useful when highlighting 

either a column or other vertical 

architectural features. 

Spot Optics (S) – 

This distribution is used to accent 

architectural features or for more 

intensity at greater distances. 

150W T6 RX7s 

150W T6 RX7s 

150W T7.5 G12 

150W T7.5 G12 

d L1xL2 Emax Emed a 




9 ft 12x15 ft 63 fc 17.7 fc 15 ft 

9 ft 30x18 ft 28.5 fc 6.3 fc 18 ft 

9 ft 6x15 ft 64 fc 24.4 fc – 

9 ft 6x15 ft 151.9 fc 89.3 fc – 

15 ft 21x24 ft 22.7 fc 6.2 fc 24 ft 

15 ft 30x30 ft 10.5 fc 3.7 fc 30 ft 

15 ft 9x27 ft 25 fc 12.1 fc – 

15 ft 9x18 ft 61.9 fc 13.6 fc – 

30 ft 39x51 ft 5.7 fc 2.2 fc 51 ft 

30 ft 45x60 ft 2.6 fc 1.1 fc 60 ft 

30 ft 21x54 ft 6.4 fc 2.5 fc – 

30 ft 21x54 ft 15.5 fc 9.8 fc – 

45 ft 60x75 ft 2.5 fc 1.1 fc 75 ft 

45 ft 60x90 ft 1.2 fc 0.5 fc 90 ft 

45 ft 30x78 ft 2.9 fc 1.2 fc – 

45 ft 30x78 ft 6.9 fc 4.1 fc – 


27



28



15 

code 

lamp 

Platea superspot floodlight a 5° 

I.7475-120 70W T6 G12 SS 

I.7475-277 70W T6 G12 SS 

17" 

I.7476-120 150W T6 G12 SS 

I.7476-277 150W T6 G12 SS 

(6˚) 

Complete with integral electronic ballast 

5-3/4" 

(4˚) 

Platea spot floodlight 

I.7385-120 70W T7.5 G12 S 

I.7385-277 70W T7.5 G12 S 

I.7386-120 150W T7.5 G12 S 

I.7386-277 150W T7.5 G12 S 


(52˚/33˚) 

5-3/4" 

9-7/8" 

17" 


29



15 

code lamp 

Platea asymmetrical floodlight 

I.7377-120 70W T6 RX7s A 

I.7377-277 70W T6 RX7s A 

I.7378-120 150W T6 RX7s A 

I.7378-277 150W T6 RX7s A 

I.7393 300W T3 RSC A 

(36˚/94˚) 

5-3/4" 

9-7/8" 


Platea flood floodlight 

I.7376-120 2x26 T4-T Gx24q-3 F 

I.7376-277 2x26 T4-T Gx24q-3 F 

17" 

I.7379-120 70W T6 RX7s F 

I.7379-277 70W T6 RX7s F 

I.7380-120 150W T6 RX7s F 

I.7380-277 150W T6 RX7s F 

I.7392 300W T3 RSC F 


(72˚/96˚) 

(72˚/41˚) 

Platea transversal linear floodlight 

I.7387-120 70W T7.5 G12 L 

I.7387-277 70W T7.5 G12 L 

I.7388-120 150W T7.5 G12 L 

I.7388-277 150W T7.5 G12 L 


(72˚/31˚) 

Platea longitudinal linear floodlight 

I.7399-120 150W T7.5 G12 LL 

I.7399-277 150W T7.5 G12 LL 


(46˚/76˚) 

Platea asymmetric linear floodlight 

I.7396-120 70W T6 RX7s AL 

I.7396-277 70W T6 RX7s AL 

I.7397-120 150W T6 RX7s AL 

I.7397-277 150W T6 RX7s AL 


(124˚/39˚) 


30



15 

code 

lamp 

Platea road lighting floodlight 

I.7444-120 70W T6 G12 ST 

I.7444-277 70W T6 G12 ST 

I.7445-120 150W T6 G12 ST 

I.7445-277 150W T6 G12 ST 

5-3/4" 

I.7698-120 70W T6 RX7s ST 

I.7698-277 70W T6 RX7s ST 

I.7699-120 150W T6 RX7s ST 

I.7699-277 150W T6 RX7s ST 

9-7/8" 

17" 


accessories 

code 

Circular baffle 

I.4452 

for I.7473, I.7474 

I.4453 

for I.7475, I.7476 

Available in color 02 

Wall washer screen 

I.1176 

for I.7376, I.7379, I.7380, I.7385, 

I.7386, I.7387, I.7388, I.7392 


Linear baffle 

I.1177 

for I.7376, I.7379, I.7380, I.7385, 

I.7386, I.7392 


Platea pole arm 

I.1148 pole ø 3-1/8” to 4-3/4” 

12” 

24-7/8” 

Platea wall arm 

I.1149 

12” 

21-1/8” 


31

Platea - iGuzzini

Create successful ePaper yourself

Delete template?

Save as template?