XB-502 manual - X-Treme

1. Attach left & right foot pedals according
to correct side by lining up pedal with bearing
on pedal shaft and snap into place.
4. Screw left & right mirrors into place and
adjust to appropriate riding need.
7.) BATTERY CONNECTION & INITIAL CHARGING
1. Remove battery pack and locate plug.
2. Plug battery wire into battery pack and
reinstall pack into foot plate.
3. IMPORTANT: Completely charge
battery for a maximum of 8 hours before
use. DO NOT CHARGE FOR MORE
THAN 8 HOURS AS THIS CAN
DAMAGE BATTERIES.
8.) TIRE INFLATION
Finally, inflate both tires to the minimum recommended tire pressure depending on the number of
riders that will be using the bike. Recommended tire pressure is between 35 – 45 PSI. We do
not recommend filling tire to 45 psi.
Be sure to check all nuts screws and bolts including ones not mentioned in the set up, for tightness
and fit before riding.
10