LINEAR UNITS

Linear Units
Accessories
Accessories
Motors, Gears and Transmission Kits
Micron DT, DTR Planetary Gears, how to order
When ordering a DT or DTR planetary gear you need to state the size and type of gear, which side of the unit the gear shall be installed, the gear
ratio and which motor that you wish to use. For DTR you also must state the prefered mounting position of the gear. With this information we can
check if your choice of motor is possible or not and give you the correct ordering code for the gear.
Micron DT, ordering data
Micron DTR, ordering data
1. Size of planetary gear
DT60
DT90
DT115
2. Type of gear
-SS
-DS
3. Mounting side of the unit
Left
Right
4. Gear ratio
3:1 (only for -SS models)
5:1 (only for -SS models)
10:1 (only for -SS models)
15:1 (only for -DS models)
25:1 (only for -DS models)
30:1 (only for -DS models)
50:1 (only for -DS models)
100:1 (only for -DS models)
5. Motor
Specify your choice of motor.
1. Type and size of planetary gear
DTR60
DTR90
DTR115
2. Type of gear
-SS
-DS
3. Mounting position of the gear
Position 1
Position 2
Position 3
Position 4
4. Mounting side of the unitl
Left
Right
5. Gear ratio
5:1 (only for -SS models)
6:1 (only for -SS models)
9:1 (only for -SS models)
10:1 (only for -SS models)
12:1 (only for -SS models)
15:1 (only for -SS models)
20:1 (only for -SS models)
25:1 (only for -SS models)
30:1 (only for -SS models)
40:1 (only for -SS models)
50:1 (only for -SS models)
60:1 (only for -DS models)
75:1 (only for -DS models)
90:1 (only for -DS models)
100:1 (only for -DS models)
120:1 (only for -DS models)
125:1 (only for -DS models)
150:1 (only for -DS models)
200:1 (only for -DS models)
250:1 (only for -DS models)
300:1 (only for -DS models)
400:1 (only for -DS models)
500:1 (only for -DS models)
6. Motor
Specify your choice of motor.
157